HIK VISION DS-K1T341BMWI-T User manual

©2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and all
other informaon hereinaer are for descripon and explanaon only. The informaon contained in
the Manual is subject to change, without noce, due to firmware updates or other reasons. Please
find the latest version of this Manual at the Hikvision website (hps://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporng the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properes of Hikvision in various
jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL
FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE
LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,
AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF
DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION
WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION,
OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL
SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU
SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR
PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF
CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR
EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER
PREVAILS.
Data Protecon
During the use of device, personal data will be collected, stored and processed. To protect data, the
development of Hikvision devices incorporates privacy by design principles. For example, for device
with facial recognion features, biometrics data is stored in your device with encrypon method; for
fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a
fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance with the
applicable data protecon laws and regulaons, including without limitaon, conducng security
controls to safeguard personal data, such as, implemenng reasonable administrave and physical
security controls, conduct periodic reviews and assessments of the effecveness of your security
controls.
Scan the QR code to get the user manual for detailed informaon.
DS-K1T341B-T Series
Face Recognion Terminal
Quick Start Guide
UD21271B-B
Descripon of Indicator:
Default: Solid green.
Authencated: Green light flashes for 3 mes
Authencaon Failed: Green light turns off for 3 s.
51 mm
Card
Presenng
Area
Touch Screen
Camera
IR Light
Indicator
Thermographic
Module
Loudspeaker
microUSB
(Connected with
Thermographic Module)
IR Light
Camera
Debugging
Port
TAMPER Network
Interface
Wiring
Terminal
Installaon Environment:
Avoid backlight, direct sunlight, and indirect sunlight.
For beer face recognion, there should be light source in or near the installaon environment.
Sunlight, wind, hot/cool air from air condioner and other external factors, which may affect
surface temperature, will create the deviaon of the temperature measurement. In order to get
an accurate result, make sure the device is applied indoors and windlessly (where is relavely
isolated from the outdoors). The working temperature should keep between 10 °C and 35 °C. If
there are no suitable environments for temperature measurement (the area faces the indoor
and connects the outdoor, the area at the door of the indoor environment, etc.), building a
temporary temperature measurement environment is suggested.
Use 4 supplied screws (KA4×22) to secure
the mounng plate on the gang box.
Remove the back sheet of the device with
tools to display the wiring terminals.
Route the cable through the cable hole of
the mounng plate, and connect to
corresponding external devices' cables.
Make sure the gang box is installed on the
wall. Align the device with the mounng plate and hang the device on the
mounng plate.
Use the 2 screws at the boom of
the device to secure the device on
the mounng plate.
Influence Factors of Temperature Measurement:
Wind: The wind will take the heat away, which may affect the measurement result.
Sweat: The sweat will take the heat away, which may affect the measurement result.
Air Condioner (Cool Air): If the indoor temperature is low, the surface temperature may also
lower than the actual temperature, which may affect the measurement result.
Air Condioner (Heat) or Heang: If the indoor temperature is high, the surface temperature may
also higher than the actual temperature, which may affect the measurement result.
In order to make the device work properly, you should wait for 90 min aer the device is powered
on.
For other installaon
methods, see the user
manual.
2
GND
GND
GND
GND
BUTTON
12V External
Power Supply
Wiegand
Card Reader
Group B
Group D
Electric Dropbolt
Power Supply
Electric Strike Door Contact
White/Black
Exit Button
White/Purple
White/Yellow
White/Red
Yellow/Green
Yellow/Gray
Yellow/Black
Black
Red/Black
Black
Yellow
Green
White
Blue
Red
NO
COM
NC
NO
COM
NC
1Appearance 2 Installaon
3.1 Wire Normal Device
1 3
4
B1
B2
A1
A2
B3
C3
C1
C2
D1
D2
D3
D4
D5
D6
D7
NC
NO
COM
Network
When connecng door contact and exit buon, the
device and the RS-485 card reader should use the same
common ground connecon.
The Wiegand terminal here is a Wiegand input
terminal. You should set the device’s Wiegand direcon
to “input”. If you should connect to an access
controller, you should set the Wiegand direcon to
“Output”. For details, see the user manual.
The suggested external power supply for door lock is
12 V, 1 A.
The suggested external power supply for Wiegand card
reader is 12 V, 1 A.
For wiring the fire system, see the user manul.
Do not wire the device to the electric supply directly.
If the interface for network connecon is too large, you
can use the supplied cable as shown below.
Connect
Network
Interface
of
Device
Connect
Network
Backlight Direct
Sunlight Direct Sunlight through Window Indirect Sunlight through Window Close to Light
MIC
The pictures here are for reference only.
Power Input
RS-485
Wiegand
Door Lock
227 mm
85 mm
70 mm
30 mm

Green/Brown Door Contact
Black
Green/Black
(NC)
Power
(NO)
(COM)
White/Purple
White/Black
White/Red
Electric
Dropbolt
Electric
Secure Door Control Unit
Strike
Red
Black
Exit Button
3.2 Wiring (With Secure Door Control Unit)
The secure door control unit should connect to
an external power supply separately. The
suggested external power supply is 12 V, 0.5 A.
6 Add Face Picture
Correct Tilt Raise
Side Bow
Tips When Collecng/Comparing Face Picture
Expression
Keep your expression naturally when collecng or comparing face
pictures, just like the expression in the picture on the right.
Posture
In order to get a good quality and accurate face picture, posion your face looking at the camera
when collecng or comparing face picture.
Size
Make sure your face is in the middle of the collecng window.
Do not wear hat, sunglasses, or other accessories that can affect the facial
recognion funcon.
Do not make your hair cover your eyes, ears, etc. and heavy makeup is not
allowed.
Correct Too FarToo Close
Posions When Collecng/Comparing Face Picture
Recommended Height:
1.43 m to 1.90 m
Too High
Too Low
Too Far
Too Close
0.5 m
0.5 m 0.5 m
1.4 m 1.4 m
1.4 m 1.4 m
Regulatory Informaon
FCC Informaon
Please take aenon that changes or modificaon not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may
cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular
installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operaon.
2006/66/EC (baery direcve): This product contains a baery that cannot be disposed of as unsorted municipal waste in
the European Union. See the product documentaon for specific baery informaon. The baery is marked with this
symbol, which may include leering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the
baery to your supplier or to a designated collecon point. For more informaon see: www.recyclethis.info
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed of as unsorted municipal waste in
the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collecon points. For more informaon see: www.recyclethis.info
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under the RE Direcve 2014/53/EU, the EMC Direcve 2014/30/EU, the
RoHS Direcve 2011/65/EU.
Warning
In the use of the product, you must be in strict compliance with the electrical safety regulaons
of the naon and region.
Provide a surge suppressor at the inlet opening of the equipment under special condions such as the mountain top, iron tower, and
forest.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
An all-pole mains switch shall be incorporated in the electrical installaon of the building.
1. This equipment is not suitable for use in locaons where children are likely to be present.
2. CAUTION: Risk of explosion if the baery is replaced by an incorrect type.
3. Improper replacement of the baery with an incorrect type may defeat a safeguard (for example, in the case of some lithium
baery types).
4. Do not dispose of the baery into fire or a hot oven, or mechanically crush or cut the baery, which may result in an explosion.
5. Do not leave the baery in an extremely high temperature surrounding environment, which may result in an explosion or the
leakage of flammable liquid or gas.
6. Do not subject the baery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or
gas.
7. Dispose of used baeries according to the instrucons.
CAUTION: This bracket is intended for use only with DS-K1T341BMI-T/DS-K1T341BMWI-T face recognion terminal. Use with other
equipment may result in instability causing injury.
CAUTION: This equipment is for use only with Hikvision’s bracket. Use with other (carts, stands, or carriers) may result in instability
causing injury.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard.
Please make sure that the power has been disconnected before you wire, install or dismantle the device.
When the product is installed on wall or ceiling, the device shall be firmly fixed.
If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the
service center.
If the product does not work properly, please contact your dealer or the nearest service center. Never aempt to disassemble the
device yourself. (We shall not assume any responsibility for problems caused by unauthorized
repair or maintenance.)
Cauon
The equipment has been designed, when required, modified for connecon to an IT power distribuon system.
+ idenfies the posive terminal(s) of equipment which is used with, or generates direct current. + idenfies the negave terminal(s)
of equipment which is used with, or generates direct current.
No naked flame sources, such as lighted candles, should be placed on the equipment.
The serial port of the equipment is used for debugging only.
Burned fingers when handling . Wait one-half hour aer switching off before handling the parts.the fingerprint sensor metal
Install the equipment according to the instrucons in this manual.
To prevent injury, this equipment must be securely aached to the floor/wall in accordance with the installaon instrucons.
Do not drop the device or subject it to physical shock, and do not expose it to high electromagnesm radiaon. Avoid the equipment
installaon on vibraons surface or places subject to shock (ignorance can cause equipment damage).
Do not place the device in extremely hot (refer to the specificaon of the device for the detailed operang temperature), cold, dusty
or damp locaons, and do not expose it to high electromagnec radiaon.
The device cover for indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low venlaon or heat source such as heater or radiator is forbidden (ignorance can
cause fire danger).
Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfuncon
however), and affecng the endurance of sensor at the same me.
Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of
the fingers may erode the surface coang of the device cover.
Please use a so and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents.
Please keep all wrappers aer unpack them for future use. In case of any failure occurred, you need to return the device to the
factory with the original wrapper.
Transportaon without the original wrapper may result in damage on the device and lead to addional costs.
Improper use or replacement of the baery may result in hazard of explosion. Replace with the
same or equivalent type only. Dispose of used baeries according to the instrucons provided by the baery manufacturer.
Biometric recognion products are not completely applicable to an-spoofing environments. If you require a higher security level,
use mulple authencaon modes.
Please make sure that the biometric recognion accuracy will be affected by the collected pictures' quality and the light in the
environment, which cannot be completely correct.
4
B1
B2
B3 Red/
Black
Secure Door
Control Unit
Wiring Terminal
Lock Output
Face Recognion Terminal
Exit Buon
Sensor Input
SENSOR
Power Input
BUTTON
COM
NC
COM
NO
NC
COM
NO
NC
5 Temperature Measurement
Enable Temperature Detecon:
When the funcon is enabled, the device will authencate the permissions and at the same
me take the temperature.
When the funcon is disabled, the device will authencate the permissions only.
Over-Temperature Threshold:
Edit the threshold according to actual situaon. If the detected temperature is higher than
the configured one, an alarm will be triggered. By default, the value is 37.3°
Temperature Compensaon:
If the measured temperature is higher/lower than the actual object's temperature, you can
set the compensaon temperature here. Available range: -99 °C to 99 °C.
Door Not Open If Temp. is Abnormal:
When Enabling the funcon, the door will not open when the detected temperature is
higher than the configured temperature threshold. By default, the funcon is enabled.
Temperature Measurement Only:
When enabling the funcon, the device will not authencate the permissions, but only take
the temperature. When the funcon is disabled, the device will authencate the
permissions and at the same me take the temperature.
Unit: Select a temperature unit according to your preference.
Measurement Area Calibraon/Measurement Area Sengs:
Configure the temperature measurement area and the correcon parameters.
1. Hold the screen surface and verify the identy to enter the Home page.
2. Tap Temp to enter the Temperature Sengs page. Configure the parameters.
Power on and wire the network cable after installation.
you should activate the device before the first login.
If the device is not activated yet, it will enter the Activate
Device page after powering on.
Steps:
For other acvaon methods, see the device user manual.
We highly recommend you to create a strong password of your
own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case leers, lower case
leers, numbers, and special characters) in order to increase the
security of your product. And we recommend you change your
password regularly, especially in the high security system, changing
the password monthly or weekly can beer protect your product.
1. Create a password and confirm the password.
2. Tap Acvate to acvate the device.
Aer acvang, you can select language, set
password change type, set reserved quesons,
set applicaon mode, set network parameters,
access to Hik-Connect, set privacy, and set
administrator.
4 Quick Operaon
Acvaon Steps Aerwards
0.5 m
1. Use finger to hold the screen surface for 3 s and slide to right/le and enter
the acvaon password to enter the Home page.
2. Enter the User Management page, tap + to enter the Add User page.
3. Set the user parameters according to actual needs.
4. Tap Face and add the face informaon according to the instrucons.
You can view the captured picture on the screen, Make sure the face picture is
in good quality and size.
For details about the ps and posions when collecng or comparing the face
picture, see the contents on the right.
5. If the picture is in good condion, tap .
Or tap to take another face picture.
6. Tap √ to save the sengs.
Go back to the inial page to start authencaon.
For other authencaon methods, see the device user manual.
User other authencaon methods if the device is affected by the light or
other items.
1:N Matching: The device will compare the captured face picture with the
ones in the database.
1:1 Matching: The device will compare the captured face picture with the
user linked face picture.
Biometric recognion products are not completely applicable to an-spoofing
environments. If you require a higher security level, use mulple authencaon
modes.
For scenarios with high safety requirement, use
the secure door control unit wiring first.
You can ask the technical support to purchase for
the secure door control unit separately.
The picture here are parts of the wiring. For details,
see the secure door control unit’s user manual.
Yellow
Blue
RS-485