HIK VISION DS-MDH005-B User manual

Smart Onboard Temperature Screening
Terminal
User Manual

Legal Informaon
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and
all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to rmware updates or other
reasons. Please nd the latest version of this Manual at the Hikvision website ( hps://
www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of professionals trained in supporng the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properes of
Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH
ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
Smart Onboard Temperature Screening Terminal User Manual
i

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Smart Onboard Temperature Screening Terminal User Manual
ii

Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instrucon manual, may cause harmful
interference to radio communicaons. Operaon of this equipment in a residenal area is likely to
cause harmful interference in which case the user will be required to correct the interference at his
own expense.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two
condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operaon.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
under the EMC Direcve 2014/30/EU, the LVD Direcve 2014/35/EU, the RoHS
Direcve 2011/65/EU.
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collecon points. For
more informaon see: www.recyclethis.info
2006/66/EC (baery direcve): This product contains a baery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentaon for specic baery informaon. The baery is marked with this
symbol, which may include leering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the baery to your supplier or to a
designated collecon point. For more informaon see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
Smart Onboard Temperature Screening Terminal User Manual
iii

Symbol Convenons
The symbols that may be found in this document are dened as follows.
Symbol Descripon
Danger
Indicates a hazardous situaon which, if not avoided, will or could
result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if not avoided, could
result in equipment damage, data loss, performance degradaon, or
unexpected results.
Note Provides addional informaon to emphasize or supplement
important points of the main text.
Smart Onboard Temperature Screening Terminal User Manual
iv

Contents
Chapter 1 Introducon ............................................................................................................... 1
1.1 Product Introducon .............................................................................................................. 1
1.2 Key Feature ............................................................................................................................ 1
Chapter 2 Acvaon and Login ................................................................................................... 2
2.1 Acvaon ............................................................................................................................... 2
2.1.1 Default Informaon ...................................................................................................... 2
2.1.2 Acvate via SADP .......................................................................................................... 2
2.1.3 Acvate via Web Browser ............................................................................................. 3
2.2 Login ...................................................................................................................................... 4
Chapter 3 Network Conguraon ............................................................................................... 5
3.1 Connect to Network ............................................................................................................... 5
3.1.1 Set Terminal IP Address ................................................................................................. 5
3.1.2 Dial ................................................................................................................................ 6
3.1.3 Connect to Wi-Fi ........................................................................................................... 7
3.2 Set Network Sharing .............................................................................................................. 8
Chapter 4 System Conguraon ................................................................................................ 10
4.1 Manage Files ........................................................................................................................ 10
4.2 Enable Factory Test .............................................................................................................. 10
Chapter 5 Operaon via Client .................................................................................................. 11
5.1 Add Face Detecon Camera via Client ................................................................................. 11
5.2 Live View .............................................................................................................................. 11
5.3 Set Parameters ..................................................................................................................... 11
Appendix A. Communicaon Matrix and Device Command ...................................................... 13
Smart Onboard Temperature Screening Terminal User Manual
v

Chapter 1 Introducon
1.1 Product Introducon
The smart onboard temperature screening terminal (hereinaer referred to as "device" or
"terminal") supports human body temperature screening, face recognion, and mask detecon. It
is embedded with close-distance lens with scanning funcon, convenient for the passengers to
scan the payment code or the traveling allowable code.
The device is dedicated for the mobile scene, applicable to buses, coaches, etc.
1.2 Key Feature
• Thermal imaging lens to realize temperature screening.
• Detector with high sensivity.
• Temperature screening with high accuracy.
• Face recognion.
• QR code scanning.
Smart Onboard Temperature Screening Terminal User Manual
1

Chapter 2 Acvaon and Login
Note
The web operaons in this chapter are only applicable to the face detecon camera.
2.1 Acvaon
For the rst-me access, you need to acvate the device by seng an admin password. No
operaon is allowed before acvaon. The device supports mulple acvaon methods, such as
acvaon via local menu, SADP soware, web browser, and client soware.
Note
Refer to the user manual of client soware for the acvaon via client soware.
2.1.1 Default Informaon
Device default IP address and user name are as follows.
• Default IP address: 192.168.48.19
• Default user name: admin.
2.1.2 Acvate via SADP
SADP is a tool to detect, acvate, and modify the IP address of the devices over the LAN.
Before You Start
• Get the SADP soware from the supplied disk or the ocial website hp://
www.hikvision.com/ , and install it according to the prompts.
• The device and the computer that runs the SADP tool should belong to the same network
segment.
The following steps show how to acvate one device and modify its IP address. For batch acvaon
and IP address modicaon, refer to User Manual of SADP for details.
Steps
1. Run the SADP soware and search the online devices.
2. Find and select your device in online device list.
3. Enter a new password (admin password) and conrm the password.
Smart Onboard Temperature Screening Terminal User Manual
2

Cauon
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case leers, lower case
leers, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
4. Click Acvate to start acvaon.
Status of the device becomes Acve aer successful acvaon.
5. Modify IP address of the device.
1) Select the device.
2) Change the device IP address to the same network segment as your computer by either
modifying the IP address manually or checking Enable DHCP.
3) Enter the admin password and click Modify to acvate your IP address modicaon.
2.1.3 Acvate via Web Browser
Use web browser to acvate the device. For the device with the DHCP enabled by default, use
SADP soware or client soware to acvate the device.
Before You Start
Ensure the device and the computer connect to the same LAN.
Steps
1. Change the IP address of your computer to the same network segment as the device.
2. Open the web browser, and enter the default IP address of the device to enter the acvaon
interface.
3. Create and conrm the admin password.
Smart Onboard Temperature Screening Terminal User Manual
3

Cauon
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case leers, lower case
leers, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
4. Click OK to complete acvaon.
5. Go to the network sengs interface to modify IP address of the device.
2.2 Login
You can log in to the device via web browser for further operaons such as live view and local
conguraon.
Before You Start
Connect the device to the network directly, or via a switch or a router.
Steps
1. Open the web browser, and enter the IP address of the device to enter the login interface.
2. Enter User Name and Password.
3. Click Login.
4. Download and install appropriate plug-in for your web browser. Follow the installaon prompts
to install the plug-in.
5. Reopen the web browser aer the installaon of the plug-in and repeat steps 1 to 3 to login.
6. Oponal: Click Logout on the upper right corner of the interface to log out of the device.
Smart Onboard Temperature Screening Terminal User Manual
4

Chapter 3 Network Conguraon
3.1 Connect to Network
Note
The bluetooth funcon is reserved.
3.1.1 Set Terminal IP Address
Set the IP address of the terminal before adding the face detecon camera.
Steps
1. Tap Network Sengs → Wired Network .
Figure 3-1 Set Terminal IP Address
2. Enable Ethernet.
3. Set IP address.
Smart Onboard Temperature Screening Terminal User Manual
5

Set IP address
manually
a. Click IP Address.
b. Edit the IP address, gateway, and subnet mask according to the IP
address network segment of the face detecon camera.
c. Click CONNECT.
DHCP If the device has been connected to the network which can get the IP
address automacally via the network cable, you can select Ethernet Mode
as Dynamic Acquision to get the IP address automacally.
3.1.2 Dial
Set the dialing parameters if you want to connect the device to the network via SIM card.
Before You Start
Install SIM card.
Steps
1. Tap Network Sengs → Dial-up Sengs .
Figure 3-2 Set Dial-up Parameters
2. Check Enable Dial-up.
Smart Onboard Temperature Screening Terminal User Manual
6

3. Select Network Standard according to the actual needs.
4. Set the dial-up parameters.
-When you connect the device to the normal network, you do not need to set the dial-up
parameters.
-When you connect the device to the private network, set the APN informaon, such as the
user name, APN, etc.
Note
• Consult the operator about the dial-up parameters of the private network.
• When you have enabled 3G/4G and Wi-Fi simultaneously, the device will use Wi-Fi in priority.
5. Oponal: Tap Dial-up Status to view the dial-up status.
3.1.3 Connect to Wi-Fi
Set Wi-Fi parameters to transmit data via wireless network.
Steps
1. Tap Network Sengs → Wi-Fi Sengs .
Smart Onboard Temperature Screening Terminal User Manual
7

Figure 3-3 Connect to Wi-Fi
2. Enable Wi-Fi.
3. Select a Wi-Fi to connect.
4. Enter the password, and tap CONNECT.
3.2 Set Network Sharing
Set network sharing to share the device network to other terminals.
Steps
1. Tap Network Sengs → Shared Sengs .
Smart Onboard Temperature Screening Terminal User Manual
8

Figure 3-4 Set Network Sharing
2. Select the sharing mode.
Share network via
Wi-Fi
Enable Portable WLAN Hotspot. Set the SSID and password. Then
the peripheral device can share the device network via Wi-Fi.
Share network via
wired network
Enable Ethernet Sharing. Then the peripheral device can share the
device network by connecng to the device network interface via
the network cable.
Result
When the device connects to the network via dialing, the connected peripheral device can get
access to the network either. In this condion, the device serves as a router.
Smart Onboard Temperature Screening Terminal User Manual
9

Chapter 4 System Conguraon
Note
• Refer to the user manual of the Android system for Sengs, Explorer, and Browser.
•Conguraon and WIDGETS are reserved funcons.
4.1 Manage Files
Tap Explorer to manage les.
4.2 Enable Factory Test
You can enable factory test to check all the hardware funcons of the device to troubleshoot.
Steps
1. Tap Factory Test.
2. Tap to run the factory test.
3. Exit from the page aer all the tests nish.
Smart Onboard Temperature Screening Terminal User Manual
10

Chapter 5 Operaon via Client
5.1 Add Face Detecon Camera via Client
Add the face detecon camera to the client to start temperature screening and face detecon.
Before You Start
The IP address of the terminal has been set.
Steps
1. Tap 4500b on the main menu.
2. Tap → Devices .
3. Select the existed device.
4. Enter Address, User Name, and Password of the face detecon camera.
Note
If the IP address of the face detecon camera has been changed, enter the edited IP address.
5. Tap Start Live View.
Result
If live view succeeded, the camera is added, and you can start temperature screening and face
detecon. If live view failed, check the entered IP address and password.
5.2 Live View
Aer the face detecon camera is added, tap → Live View to start temperature screening and
face detecon.
5.3 Set Parameters
Tap → Conguraon to set the device parameters and view the client informaon.
Voice Broadcast
Enable the funcon, and the device will broadcast voice prompt during the temperature
screening.
Code Scanning Supplement Light
Enable the funcon, and the supplement light will light on automacally when it inducts the QR
code to make it convenient to scan the QR code.
Select Mode
Thermography Mode
Smart Onboard Temperature Screening Terminal User Manual
11

Only the temperature screening funcon is enabled.
Customer Trac Mode
Only the face recognion funcon is enabled.
All
Both the temperature screening and face recognion funcons are enabled.
ACC
Set the delayed shutdown me. Aer the sengs take eect, the device will shut down aer
the set me aer the automobile is o.
Scheduled Startup
The device will start up automacally at the set me. If the device has been started up before
the set me, the startup status will connue.
About
View the informaon such as the client version.
Smart Onboard Temperature Screening Terminal User Manual
12

Appendix A. Communicaon Matrix and Device
Command
Scan the QR code below to get the communicaon matrix of the device.
Scan the QR code below to get the device command.
Smart Onboard Temperature Screening Terminal User Manual
13

UD21421B