ADTRAN Total Access 3050 User manual

Product Features
■Up to 28 Octal ADSL with POTS
splitter modules per chassis
■Supports ADSL, ADSL2+, and
VDSL2
■Total Access 3000 DSLAM
integration
■ANSI T1.413 compliant
■Four-pole splitter design with
no active components on the
splitter modules
■ Make-before-break connec-
tors to maintain always-on
POTS
■Rugged NEBS-compliant metal
design with latched, hinged,
metal front cover for easy
design
■Filtered airflow maintained
from the front of the chassis
■SHDSL, IMA, IDSL, DS1 FR,
CES, and DSX-1 service
accommodation
■Industry-leading, 10-year
warranty
Asymmetric Digital Subscriber Line (ADSL
and ADSL2+) is the prominent DSL service
offered by telecom carriers and continues to
be delivered in conjunction with Plain Old
Telephone Service (POTS). The extraordinary
demand for ADSL service has accelerated
the demand for higher-density equipment.
Furthermore, as the demand for VDSL2
grows, both splitter and non-splitter appli-
cations will be required.
The ADTRAN®Total Access®3050 is
designed to meet this demand by providing
the ADSL/VDSL and POTS signal splitting/
combining function. It is configured to inte-
grate with the Total Access 3000 DSLAM using
28 Octal splitters or cut-through modules per
chassis and is ANSI T1.413 compliant. The
shelf is a solid metal design with a latched,
hinged, metal front cover for easy access. A
filtered airflow is maintained from the front of
the chassis. The Total Access 3050 utilizes a
four-pole splitter design and no active
components are on the standard splitter
modules. No direct current (DC) blocking
capacitor is required.
ADTRAN designs products that maximize
functionality for its carrier customers. In that
regard, the Total Access 3050 accommodates
other service cards such as SHDSL, IMA,
IDSL, DS1 FR, CES, and DSX-1. These can be
utilized by installing a cut-through module
instead of a splitter module in the
corresponding shelf.
The unit uses make-before-break connec-
tors to maintain POTS connectivity and
operate normally without a splitter module
installed. Connection to the Total Access 3000
DSLAM is established using 64-pin connec-
tors.
The rear of the shelf has twenty 50-pin and
eight 64-pin amp connectors, one DB-25
connector for Metallic Test Access (MTA), and
one RS-485 wire-wrap bus for daisy chaining
splitter shelves. There is a standard power
connector for –48 V, –48 V return, and chassis
ground.
The system will also support MTA. With
the addition of the metallic test control
module and modules with MTA, the shelf will
interface with metallic test heads and provide
access to the loops. There are MTA modules
for both ADSL and cut-through applications.
DSLAM Splitter Shelf
Total Access 3050 DSLAM Splitter Shelf

Specifications are subject to change without notice. ADTRAN and Total Access are regis-
tered trademarks of ADTRAN, Inc. All other registered trademarks and trademarks men-
tioned in this publication are the property of their respective owners.
Product Specifications
Front Panel Features
■Shelf has latched, hinged, metal front cover
■Filter for the Total Access 3000 in the front cover
Mechanical
■Dimensions: 6 in. H x 23/19 in. W x 12 in. D
(15.24 cm H x 58.42/48.26 cm W x 30.48 cm D)
■Weight: 2 lb (0.907 kg)
■Mounting: 4 RU
Interfaces
Management Interface
■RS-485
MTA Interfaces
■POTS: 50-pin amp
■ADSL+POTS: 50-pin amp
■ADSL Interface to Total Access 3000: 64-pin amp
Electrical
■Operates from A or B
■-42 to -56 VDC
Regulatory Standards
■NEBS Level 3
■GR-1089-CORE, Issue 3
■GR-63-CORE, Issue 2
■NRTL Safety Listed
Total Access 3050 DSLAM Splitter Shelf
Management
■Remote management: TL1 via Total Access 3000
Environmental
■Operating temperature: -40ºC to +70ºC
■Storage temperature: -40ºC to +85ºC
■Relative humidity: Up to 95 percent, noncondensing
Ordering Information
Equipment Part #
Total Access 3050 Splitter Shelf 1183001L1
ADSL2+ Splitter Module 1183102L1
ADSL2+ Splitter Module with Test Access 1183102L2
VDSL2 Splitter Module 1183202L1
Cut-through Module 1183003L1
Cut-through Module with Test Access 1183003L2
Metallic Test Controller 1183010L1
Total Access 3000 to
Total Access 3050 Cable 1181926L2
61183001L1-8B May 2007
Copyright © 2007 ADTRAN, Inc.
All rights reserved.
DSLAM Splitter Shelf
ADTRAN, Inc.
901 Explorer Boulevard
Huntsville, AL 35806
P.O. Box 140000
Huntsville, AL 35814-4000
256 963 8000 voice
256 963 8030 fax
877 457 5007 fax back
General Information
800 9ADTRAN
[email protected]
www.adtran.com
Pre-Sales
Technical Support
888 5ADTRAN
[email protected]
www.adtran.com/support
Where to Buy
800 827 0807
www.adtran.com/where2buy
Post-Sales
Technical Support
800 726 8663
[email protected]
www.adtran.com/support
Regional Offices
Dallas, TX
972 830 9070
Denver, CO
303 471 9150
Irvine, CA
949 260 3500
Kansas City, KS
800 471 8649
Newark, NJ
800 471 8656
Ontario, Canada
416 290 0585
Quebec, Canada
877 923 8726
San Antonio, TX
888 223 7671
International Inquiries
[phone] voice
[phone] fax
[email protected]
www.adtran.com/international
ADTRAN is a
TL 9000 registered company.
ADTRAN is an
ISO 9001:2000 registered company.