ADTRAN Total Access 1200F User manual

Total Access 1200F
Rackmount Ethernet Aggregation Unit
Product Features
■ 19” or 23” rackmountable
■ Dual Optical or Copper
GigE Network feeds via
SFP Modules
■ Networks with
Total Access 1248 or
Total Access 1148
DSLAMs for fiber
deployment
■ 6 Gbps switching capacity
■ Easily configurable for
both electrical and optical
expansion interfaces
■ Priority Queuing (802.1p)
■ 801.q-in-q VLAN
tagging (802.1ad)
■ Integrated security
support (blocks direct
port-to-port traffic)
■ Replication of
multicast traffic
■ Local -48 VDC powered
■ Remotely provisioned
and managed through
TL1, Telnet, SNMP, or
Total Access EMS; saves
truck dispatch cost
■ Industry-leading,
10-year warranty
The key to customer retention and continued
revenue growth is to offer new, higher
bandwidth services to your customers. The
Total Access®1200F offers higher bandwidth
delivery and cost improvement for next-
generation services.
The Total Access 1200F is a 1U high rack-
mount Ethernet aggregation unit. It serves
up to four Total Access 1248 Mini-DSLAMs
or 1148 OSP DSLAMs, logically combining
them into a single, high-bandwidth Ethernet/
IP DSLAM. The Total Access 1200F provides
high-bandwidth uplinks, Ethernet aggregation
functions, fiber and copper system intercon-
nects, and video-enabling functions like
Internet Group Management Protocol (IGMP)
proxy for multicast replication. Additionally,
it provides an array of security features
needed to enable and protect triple-play
service delivery through Total Access 1248
or Total Access 1148 DSLAMs. Carriers can
deploy Total Access 1248 or 1148 IMA-fed
DSLAMs today and then migrate to triple-
play service delivery with the simple addition
of the Total Access 1200F.
A single unit will support up to four
Total Access 1248 or 1148 DSLAMs for a
total subscriber density of up to 192 ports.
Dual Gigabit Ethernet (GigE) network
uplinks are provided to interface the core
switch-router via two Small Form-factor
Pluggable (SFP) slots. Four SFP slots are
available for subtending Total Access
1248/1148 DSLAMs. Access technologies
supported include ADSL, ADSL2, ADSL2+,
and VDSL2, through appropriate Total
Access 1248/1148 DSLAMs.
The Total Access 1200F and associated
Total Access 1248/1148 DSLAMs are
managed as a single unit either through
a local interface on the Total Access 1200F
or remotely through Telnet or SNMP. The
Total Access 1200F is fully supported by
the Total Access Element Management
System (EMS), with remote management
communication accomplished through
SNMP. ADTRAN’s Total Access EMS provides
comprehensive management for ADTRAN’s
complete DSLAM product line.

ADTRAN, Inc.
901 Explorer Boulevard
Huntsville, AL 35806
P.O. Box 140000
Huntsville, AL 35814-4000
256 963-8000 voice
256 963-8030 fax
General Information
800 9ADTRAN
[e-mail]
www.adtran.com
Pre-Sales
Technical Support
888 5ADTRAN
[e-mail]
www.adtran.com/support
Where to Buy
800 827-0807
www.adtran.com/where2buy
Post-Sales
Technical Support
800 726-8663
[e-mail]
www.adtran.com/support
For the regional office
nearest you, visit:
www.adtran.com/where2buy
International Inquiries
[phone] voice
[phone] fax
[e-mail]
www.adtran.com/international
ADTRAN is an ISO 9001, ISO 14001,
and a TL 9000 certified supplier.
ADTRAN believes the information in this publication to be accurate as of publication
date, and is not responsible for error. Content and specifications subject to change
without notice. ADTRAN and Total Access are registered trademarks of ADTRAN, Inc.
Total Access®1200F
Rackmount Ethernet Aggregation Unit
61179660L1-8A June 2007
Copyright © 2007 ADTRAN, Inc.
All rights reserved.
Environmental
■Operating temperature: -40° C to +70° C
■Storage temperature: -40° C to +85° C
■Relative humidity: 95 percent, non-condensing
Protocol Specifications
■IGMP proxy v2
■IEEE 802.1P “p” bit priority queuing
■RFC 2684 bridged encapsulation
■MAC address filtering and limiting
■PPPoE intermediate agent
■Proxy ARP
■DHCP proxy and Option 82 (RFC 3046)
Ordering Information
Equipment Part #
Total Access 1200F 1179660L1
E/O OSP Media Converter,
Local -48 VDC Powered 1179761L1
E/O OSP Media Converter, Line Powered 1179761L2
E/O OSP Media Converter, AC Powered 1179761L3
Total Access 1248 Client with IP Code 1179641L6
Total Access 1148 Client with IP Code,
-48 VDC Powered 1179740L4
Total Access 1148 Client with IP Code,
110 VAC Powered 1179740L5
Total Access 1148 Client with IP Code,
Line Powered 1179740L6
Total Access 1200F to Total Access 1148
Client Cable 1179826L1
Product Specifications
Interfaces
Network
■Two (2) modular optical GigE network feeds
(SFP IEEE 802.3 compliant)
Subscriber
■Four (4) SFP interfaces for electrical or
optical extensions
■Four (4) fixed electrical interfaces
■DB-9 craft interface
■DB-15 Alarm interface, input/output
■10Base-T Ethernet management interface
Mechanical
■Dimensions: 1.75 in. H x 17.25 in. W x 10 in. D
■Weight: 6 lbs
■Mounting: Can be mounted in either a flush-
mount or mid-mount orientation in either a
19-inch or 23-inch rack.
Management
■Local: Local craft interface via VT100 terminal
■Remote: TL1, Telnet, SNMP, Total Access EMS
Power
■-42 VDC to -56 VDC
Regulatory Standards
■NEBS Level 3
■GR-1089-CORE, Issue 3
■GR-63-CORE, Issue 2
■NRTL Safety Listed
■FCC Part 15