Advanced Elements STRAITEDGE ANGLER PRO User manual

OWNER’S MANUAL
MODEL AE1055
PATENTED
IMPORTANT
STRAITEDGE ANGLER PRO
INFLATABLE KAYAK
TM
IMPORTANT! PLEASE READ THIS MANUAL CAREFULLY BEFORE PROCEEDING.
AFTER READING THIS MANUAL, SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ADVANCED ELEMENTS, INC 2022 REV 02-2022
1 PERSON KAYAK

INTRODUCTION
inflatableinflatable
kayakskayaks withwith cuttingcutting
edgeedge
technologytechnology
Designed in California, our goal at Advanced Elements is to develop new
and unique paddlesports products that enhance our customers’ outdoor
experience. Our focus is on designing and manufacturing “Inatable kayaks
with cutting edge technology” and providing excellent customer service. We
are deep rooted in product development with patented technology, striving
to develop inatable kayaks, iSUPs, and paddlesports accessories that excel
in performance, quality, and portability. All of our products have been
designed to give paddlers the tools they need at the value that they deserve.
We feel that it is extremely important to make sure that our customers are
having the best experience possible. One of the ways we do this is by a
passionate focus on customer support. It is the feedback from our customers
that has allowed us to excel and continue to grow over the years.
Our oces, near San Francisco California, are not only where we conceive of
and design our innovative products, but also where you will nd our
excellent Customer Service team that is ready to answer any questions you
might have about our products and oer premier product support.
We hope to see you someday soon, on the water!
Sincerely,
The Advanced Elements Team

StraitEdgeTM Angler PRO Inatable Kayak Owner’s Manual
3
TABLE OF CONTENT
1. Caution – Safety Warning........................................................4
1.1 Boating Safety...................................................................5
2. Specifications .............................................................................6
2.1 Capacity.............................................................................6
2.2 Features..............................................................................6
3. Assembly/Inflating/Deflation Instruction...........................7
3.1 Assembly...........................................................................7
3.2 Accessory Mounting Rail................................................8
3.3 Understanding Your Valves...........................................9
3.4 Inflation............................................................................12
3.5 Over Inflation and Temperature Regulation .............13
3.6 Deflation..........................................................................13
3.7 Folding.............................................................................13
4. Guidelines For Usage .............................................................13
4.1 To Use As Self-Bailing...................................................14
5. Proper Care And Storage.......................................................15
6. Repairs......................................................................................15
6.1 Repairing Small Punctures And Cuts Using The
Peel-And-Stick Patch .....................................................16
6.2 Repairing Pinholes.........................................................16
7. Troubleshooting ......................................................................16
Manufacturer’s Statement Of Origin (MSO)...........................18
Declaration Of Conformity........................................................19
Limited Warranty........................................................................20
Section 2 : Français

4
1. CAUTION – SAFETY WARNING
Users of this product agree by their use to accept the inherent risks involved in this paddlesports
activity and agree to follow all instructions, cautions, and warnings carefully before using
this kayak.
(PLEASE READ CAUTION STATEMENT CAREFULLY)
Advanced Elements, inc.
TOLL FREE 866-262-9076
• Not intended for Commercial Use.
• Never use a compressor or compressed air to inate as it could result in damage or injury.
• Do not transport a fully inated boat or leave it on the beach. Heat from the sun or an increase
in elevation can lead to over-ination and damage.
• Do not over-inate, as it can damage the kayak or cause injury.
Please read this entire manual for additional safety information. Please pay close attention to
items marked DANGER, WARNING, CAUTION, IMPORTANT, NOTICE, NEVER, and
ALWAYS.

StraitEdgeTM Angler PRO Inatable Kayak Owner’s Manual
5
1.1 BOATING SAFETY
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
The precautions listed in this manual and on the craft are not all-inclusive. If a procedure,
method, tool or part is not specically recommended, you must satisfy yourself that it is safe
for you and others, and that the craft will not be damaged or made unsafe as a result of your
decision. REMEMBER – always use common sense when paddling YOUR KAYAK!

6
2. SPECIFICATIONS
Dimensions:
Length: 320 cm (10 ft 6 in)
Width: 97 cm (38.5 in)
Weight: 45 lbs (20.5 kg)
Max. Person Capacity: 400 lbs (181 kg)
Max. Persons & Gear Capacity: 400 lbs (181 kg)
Recommended Pressure:
Main chambers: 2.25 psi (0.16 bar)
Floor chamber: 6.0 psi (0.41 bar)
Bow and Stern airbag: 1.0 psi (0.07 bar)
2.1 CAPACITY
The person/load capacity is determined by the availability of proper seating on the kayak.
Acceptable seating determines the number of passengers, not the overall load capacity.
WARNING: Do not exceed the certied maximum capacities under any circumstances.
Overloading will reduce freeboard and increase the likelihood of swamping, especially in heavy
seas. Overloading causes handling to become sluggish, making it dicult to react quickly.
2.2 FEATURES
Hull Design: Built-in aluminum ribs dene the bow and stern and improve tracking
Versatile: The accessory Mounting Bar gives the ability to mount aftermarket rod holders, sh
nder, and other equipment
Easy To Set Up: Preassembled at the factory. Simply unfold, inate and attach the seat
Comfortable: High support, adjustable lumbar seat provides comfort for hours of paddling.
Durable: Abrasion Pads in high use areas for maximum durability.

StraitEdgeTM Angler PRO Inatable Kayak Owner’s Manual
7
Bow and Stern Design
The bow and stern have removable ribs of high-grade aluminum. When the chambers are inated,
these ribs press against the outer cover and form a high performance bow and stern.
3. ASSEMBLY/INFLATING/DEFLATION INSTRUCTION
The StraitEdgeTM Kayak has a rigid frame in the bow and stern that enhances its performance.
3.1 ASSEMBLY
1. Insert aluminum Bow rib and the Stern rib into the webbing slots on the StraitEdge™ air bags
and webbing slots on the kayak oor, at the bow and stern.
2. Attach air bags to the outer cover by tightening the “air bag compression straps” and buckling
the “air bag buckle”. Do this while the air bag is deated. These are preset at the factory and
may not require any adjustment.
3. Attach the adjustable seat to the StraitEdge™ Angler side tubes by fastening the buckles and
clipping the steel snap hooks to the d-rings behind the seating area.
Front and Rear Bungee
Deck Lacing
AirFrame PROTM Seat
Molded Rubber
Carry Handle
Hard edge bow
for improved
tracking StraitEdgeTM
System
Drop-Stitch Floor
SpringTM Valve
Stainless Steel D-Rings for Drift
Anchor and Stringer Attachment
Removable Tracking
Fin
Front and Rear Accessory
Frame System
Self Bailing Ports
Paddle Holder

8
3.2 ACCESSORY MOUNTING RAIL
The Accessory Mounting Rail can be used with any aftermarket 1” round rail mount shing rod
or accessory holders. The Accessory Mounting Rail does not need to be installed on the kayak if
you are not intending on using it for any rail-mounted accessories.
Installation and Assembly
Make sure to install the Accessory Mounting Rail before ination.
1. Make sure that the Accessory Mounting Rail is in 3 parts, you should have 2 Mounting Rail
Arms and 1 Cross-bar. If the Accessory Mounting Rail is assembled:
I. Locate the push-buttons at the sockets of the Mounting Rail Arms.
II. Depress the push-buttons and separate the Mounting Rail Arms from the Cross-bar.
2. Once you have the Accessory Mounting Rail in 3 parts, slide the Mounting Rail Arms through
the grommets located at the front of the kayak. Make sure that the push-button sockets are
pointed to the front of the kayak. (See Illustrations 1 and 2)
3. Socket the Cross-bar onto the Mounting Rail Arms. Make sure that the push-buttons pop
up through the holes on the Cross-bar. At this same time, make sure that the pushbuttons are
positioned in between the two grommets, not in front of the forward grommets.
(See Illustrations 1 and 2)
4. To remove the Accessory Mounting Rail, press the push-buttons in at the sockets and separate
the Cross-bar from the Mounting Rail Arms, then slide the Mounting Rail Arms out of the
grommets.

StraitEdgeTM Angler PRO Inatable Kayak Owner’s Manual
9
3.3 UNDERSTANDING YOUR VALVES
Advanced Elements StraitEdgeTM kayak uses the following valves. The Advanced Elements
spring valve has the function and durability of other military type valves and is compatible with
most standard pumps. The lock nut holds the valve in place with the cover for easy ination.
The following gures will have details on how to operate the valves.
TO INFLATE: use nger to push in center stem, rotate ¼ turn, and allow stem to spring up into
the up/outward position.
TO DEFLATE: Use nger to push in center stem and rotate ¼ turn to lock stem down/inward.
In order to switch the valve from inate to deate or vice-versa, simply use your nger to press
the valve stem down/inward and rotate it a ¼ turn to either lock it down for deate, or unlock it
(stem will spring up) for inate.
How the spring valve works
When the valve is in the inate (up/outward) position, the air being pumped in pushes the
spring-loaded plunger open, allowing air to enter the air chamber, but not letting it escape.
When the valves is in the deate (down/inward) position, the spring loaded plunger is wide
open allowing the air to come rushing out of the air chamber. If the valve is in the inate
position, the valve’s plunger stem will be ush with the rim of the valve. If the valve is in the
deate position, the valve’s plunger stem will be inside, or lower than the rim of the valve. To
change the valve from the inate position to the deate position, simply use your nger to press
the valve plunger stem down/inward, and give it a ¼ turn. This will lock the plunger open
and allow the air to rush out. Use the same procedure in reverse to unlock the valve plunger,
allowing it to spring up into the inate position.
Special note: If you are using a 12v inator, like those that come with most inatable mattresses
or those that plug into car cigarette lighters, you may need to have the valve in the deate
(down/inward) position because those types of pumps typically do not provide enough air
pressure to press the plunger open to allow air into the air chamber. Additionally, 12v inators
do not provide enough pressure to fully inate the kayak, so you will need a secondary pump to
nish the job.
 Usingthe“Screw-on”SpringValveAdaptorwithyourmaininationvalves
The screw-on spring valve adaptor was designed to enable the pump hose to securely connect
to the Advanced Elements sprint valve without falling o during the ination, making ination
easier. The valve adaptor also has a semi-circle protrusion that depresses the valve stem, opening
the valve slightly to allow pumps with pressure gauges to take a constant reading. When
inating the kayak using the Spring Valve Adaptor, the valve should be in the inate position.

10
Pressure Relief Valves
Your kayak is equipped with a pressure relief valves on the Floor and Main chambers. Should
the pressure in an air chamber exceed the recommended rating, this valve will open slightly to
release some pressure and avoid possible damage. You may hear a slight hiss should this occur.
Care should be taken to not damage this valve and it should not be tampered with.
NOTE: Do not remove the RED valve cap and always ensure the cap is securely hand tightened
for proper performance.
Ination and Deation of the Main Air Chambers should always be done through the Main gray
2-way valves only.
Ination and Deation of the Floor Air Chambers should always be done through the center gray
Boston Valve.
Pressure Relief Valve Maintenance
The PR (pressure relief) valve is a high-performance pressure relief system that can benet from
some very simple periodic maintenance to ensure optimal performance. Additionally, in cases
where your kayak is used in saltwater and/or sandy areas; sand, grit, and salt can build up and
I
n

a
t
e
D
e

a
t
e
PUSH AND
TURN
Figure 1. Inflate/ Deflate SpringValve
Special note: the Spring Valve Adaptor comes with all current Advanced Elements pumps,
with the exception of the 12v inator, and will attach to any Advanced Elements pump that does
not have the adaptor already included, with the exception of the 12v inator. The Spring Valve
Adaptor will also attach to some other manufacturer’s pumps, but you must check the
attachment style at the end of the pump hose to be sure it will t.

StraitEdgeTM Angler PRO Inatable Kayak Owner’s Manual
11
Valve Base: This part is
permanently attached to the
air bladder
PR Valve: The spring-loaded
center is located at the bottom
of the threaded section
prevent the PR valve from working properly. To maintain optimal performance in all conditions,
it is recommended that the PR valve be removed and cleaned periodically to ensure proper
function.
To Properly Maintain your PR Valve:
1. Deate the air-chamber that the PR valve is attached to (e.g. the inatable oor). Unscrew the
PR valve from its base by hand, turning it counter-clockwise.
2. Once removed, place the PR valve in a cup of warm soapy water for 5 minutes.
3. While submerged in the cup of water, depress the white spring-loaded center of the valve to
dislodge any sand or grit.
4. Remove from water, dry with a cloth and reattach to the valve base by screwing in clockwise.

12
3.4 INFLATION
IMPORTANT: Before inating, check to be sure that the kayak is completely assembled.
Inate your kayak in the following order. Failure to follow these instructions may cause
damagetoyourkayak.Donotoverinate.
1. Locate chamber 1. Unscrew cap and check that plunger valve is in the inate position.
Inate Chamber 1 until rm to the touch (2.25 psi ONLY). (See gure 1 on pg 10).
2. Proceed to chamber 2. Inate chamber 2 until StraitEdge™ tube is rm to touch
(2.25 psi ONLY). Close caps on chambers 1 and 2 tightly. (See gure 1 on pg 10).
3. Inate Chamber 3 “Floor” using the adaptor included in the repair Kit. (6.0 psi MAX).
NOTE: You may nd it easier to attach the seat before inating the oor. IMPORTANT: If
you choose to attach the seat before inating the oor, make sure to fully extend the seat
attachment straps to prevent any damage to the d-rings when inating the oor!
4. Locate Chambers 4 and 5. Inate Chambers 4 and 5 until rm (1.0 psi ONLY).
5. Make sure all valves are closed tightly and properly.
6. Locate the 4 steel d-rings along the sidewalls of the kayak in the 4 drainwell areas. Set seat in
the desired seating position and attach the 4 webbing straps to the steel d-rings. Adjust
webbing straps as needed to make sure that the seat stays tightly positioned in the kayak.
7. If you are paddling in deeper waters and you desire added tracking ability, install the
removable tracking n into the mount on the bottom of the kayak. If paddling shallow waters,
or areas with potential shallow submerged objects, do not attach the tracking n.
SV - Spring Valve
3 (oor chamber, SV)
STRAITEDGETM ANGLER PRO 5-AIR CHAMBERS

StraitEdgeTM Angler PRO Inatable Kayak Owner’s Manual
13
3.5 OVER INFLATION AND TEMPERATURE REGULATION
CAUTION: Water temperature and weather will aect the air pressure of the kayak. In cold
weather and water your kayak will lose some pressure. If this occurs, you may want to add a
bit more air to the kayak to improve performance. In hot weather or prolonged sunlight, the air
inside the kayak will expand. You must let some air out of the appropriate chambers to prevent
the kayak from failing due to overpressure. You should avoid exposing your kayak to extreme
temperatures (hot or cold).
3.6 DEFLATION
1. Remove the caps from chamber 1, 2, 3, 4 and 5.
2. Push valve stems inward and rotate to deate position.
3. Once the chambers are deated you can use your pump to vacuum out any additional air
to improve folding.
3.7 FOLDING
NOTICE: Reverse your pump to completely deate all chambers.
1. Completely deate all air chambers and thoroughly dry the kayak and remove the seat.
2. Fold in half, down the center, lengthwise.
3. Fold into 3 equal sections.
4. Place into duel bag.
4. GUIDELINES FOR USAGE
Paddlesports can be very dangerous and physically demanding. The user of this product should
understand that participation in paddlesports may involve serious injury or death. Observe the

14
following safety standards whenever using this product. The user of this product acknowledges
both an understanding and an assumption of the risk involved in paddlesports.
After you have inated your kayak and before you put it in the water, inspect your equipment
for obvious signs of wear or failure. Review local rules and regulations and read again the
“CAUTION” statement.
Most areas have local laws and regulations about the use and equipment of small boats. Usually
a phone call to the local authorities will provide you with the needed information. Some areas
may require that you register and display a registration number on the front of your kayak.
Once you have been issued a number, it is best to ax it to the kayak by printing it on the
material with a permanent ink marker. If you are required to display a sticker or vinyl letters, on
inatable boat ID kit can be purchased at most marine stores.
Your kayak is designed to be paddled with a double bladed kayak paddle. Paddle with short
and even strokes. Keep the blade close to the kayak and the paddle almost vertical. Pull with
your lower hand and push with your upper hand. To reduce the amount of swaying at the
front of the kayak, ease o on the force of your stroke. Paddling with a backward stroke can
sometimes oer quick maneuverability.
ALWAYS practice safety and take the time to learn about the area where you are paddling. Get
ocial information about the local tides and currents before paddling there. Be careful that you
do not over estimate your strength, your endurance or your skill. Be careful never to under
estimate weather conditions. Be aware of the dangers before you begin. Be aware of your skill
level. Be sure you understand and accept the risk of these dangers. There are many paddling
clubs all over the world. These can be a great source of information on places to paddle, people
to paddle with and most importantly, continued safety practices.
4.1 TO USE AS SELF-BAILING
The StraitEdge™ can be used as both a self-bailing and non self-bailing kayak. Most self-bailing
inatable kayaks are designed for paddling white water only. They typically have quite a bit of
rocker to allow quick turning and other maneuvers. By opening the drain ports you will allow
water or waves that spills into the kayak to drain out through the bottom. In calm conditions or
on cold days you may wish to close the drain ports to prevent water from entering the kayak at
all. The StraitEdge™ incorporates the aluminum bow and stern frame to improve tracking in
open water conditions.
To change to a self-bailing kayak, locate the self-bailing ports and remove the caps as shown
below.

StraitEdgeTM Angler PRO Inatable Kayak Owner’s Manual
15
5. PROPER CARE AND STORAGE
Your inatable kayak is made of very durable materials. However, like anything else, proper
use and care will increase the life of your kayak. Before storing your kayak, make sure it is both
CLEAN and DRY. You may clean your kayak with a mild soap and water. NEVER use strong
solvents to clean your kayak as they will destroy the material.
 NEVERunzipthechambercoverwhenthekayakisinated.
Be sure to rince your kayak with freash water after every use in salt water and allow it to dry
thoroughly before storing. Use a dry towel to wipe up all moisture. It should be deated and
kept out of direct sunlight when stored. Avoid exposure to extreme temperatures (hot or cold).
If your boat is exposed to freezing temperatures while storing, allow it to warm up before
unfolding.
Do not store your kayak for an extended period of time while wet.
Follow these steps for removing excess water:
1. Unzip the 2 zippers that run down the sides of the kayak
2. Use a sponge or towel and wipe up any excess water in the outer cover
3. Wipe o the oor (top and bottom)
4. If there is sand or gravel in the kayak, you can hose out the cover, and then wipe it down
with a towel
5. Most of the time you can wipe out the inside of the kayak absorbing most of the water,
then pack it up.
6. REPAIRS
All kayaks come with a repair kit that includes a glueless peel-and-stick patch. For more
signicant repairs, we include a selection of material patches that can be glued on. Simply
acquire a PVC glue at your local marine or outdoor store or contact our Customer Service for
assistance via email at [email protected] or 1-866-262-9076.
8

16
6.1 REPAIRING SMALL PUNCTURES AND CUTS USING THE PEEL-AND-
STICK PATCH
1. Cut a patch to size (approx. 1/2” larger than the hole or damaged area).
2. Carefully clean the area where patch will be placed with water and/or mild soap.
3. Make sure all surfaces are completely dry before proceeding.
4. Carefully peel back the paper liner on the glueless patch and carefully apply the patch
over the hole-taking care to avoid any bubbles in the patch. Rub all edges to seal.
5. As a rule of thumb, the patch will start to cure immediately with approx. immediate
adhesion of 50% with full 100% adhesion 24 hours after application.
6.2 REPAIRING PINHOLES
1. Inate the PVC tube. Locate the pinhole by sponging soapy water over the tube until
you see air bubbles. Mark the location of the pinhole.
2. Deate the tube and dry the aected area. Apply a drop of glue to the pinhole
3. Allow glue to dry completely.
4. Do not inate the kayak for at least twelve hours.
7. TROUBLESHOOTING
PROBLEM
Does not hold air while
inating:
The kayak is sagging or
underinated:
The kayak will not hold
full pressure for more
than a couple of hours:
Kayak still loses air:
SOLUTION
The spring valve uses a plunger system. The only time the plunger
should be in the open position is when you are deating. Make sure
that the plunger is closed to inate. Push the plunger in and rotate
counter-clockwise.
Be sure that the right pump is being used. You need a bellows foot
pump or a double action hand pump. A 12-V electric does not
supply enough pressure to fully inate the kayak. The 12v can be
used to partially inate the kayak but one of the other pumps is
needed to top it o.
Make sure that the plunger is in the closed position. It should only be
open when deating. If it is open, the only seal is the black rubber
gasket inside the cap. Even then, a little air may still leak out.
If you have checked all the previous possible reasons for the kayak
losing air, then there may be a pinhole or a puncture somewhere on
the tube. Pull tube from outer covers. Inate. If you cannot see or
hear where a leak may be, take a clean rag with soapy water and begin
rubbing the tube. If a hole is present, bubbles will continually form.
Repair using repair kit. If it is a very small pinhole, a dab of the glue
may be sucient.

StraitEdgeTM Angler PRO Inatable Kayak Owner’s Manual
17
PROBLEM
The tube is kinked
or bent in:
The kayak is not self
bailing:
There is water in the
kayak:
The kayak drifts to one
side:
The kayak does not track
well:
SOLUTION
The tube just needs to be adjusted. When kayak is fully deated try
adjusting the position of the tube inside of the outer shell. Then
reinate.
There are four port holes under each side of the kayak. The port holes
have caps so it can be used as a self-bailing or a dry kayak. Make sure
the caps are o.
There will almost always be a little water in the kayak. One reason
is the water drips o of the paddle and into the kayak. The kayak is
a self-bailing kayak. There are four port holes under each side of the
kayak. The port holes have caps so it can be used as a self-bailing or a
dry kayak. Make sure the caps are on.
A kayak will always head in the direction of your last stroke. Make
sure to check that the air bags in the bow and stern are properly
inated and that the straps are pulled tight. If the oor bladders is not
completely inated, this will also cause the kayak to drift.
Try moving your seat forward a little more. This will allow for better
weight distribution and better tracking.

18
Note: If your state requires the licensing of this boat, please use the form below. If you need any
assistance lling out this form, please contact Advanced Elements Customer Service Department.
MANUFACTURER’S STATEMENT OF ORIGIN (MSO)
Manufacturer’s statement of origin for a vessel sold in the state of______________________________ ,
The undersigned manufacturer hereby certies that the new boat described below, the property
of said manufacturer, has been transferred this _________day of _____________________, 20_________
on Invoice# _________________to:
Owner’s/Dealer’s Name____________________________________________________________
Address___________________________________________________________________________
City, State, Zip______________________________________________________________________
Model Name: StraitEdgeTM Angler PRO Kayak (AE1055)
Model Year _________
HIN# ___________________________
Type: Kayak
Hull Material: PVC/Polyester
Length Overall: 10ft 6in
Beam: 38.5 in
U. S. Coast Guard Capacity Plate Information (where applicable):
Maximum persons capacity in whole persons: 400 lbs (181 kg)
Maximum weight capacity (persons & gear): 400 lbs (181 kg)
The manufacturer further certies that this was the rst transfer of such new boat and that all
information given herein is true and accurate to the best of their knowledge
P.O. Box 5128 Concord, CA 94524
Signature_______________________
First assignment for value received, in the amount of $ ____________________________,
the undersigned hereby transfers the Certicate of Origin and the boat described therein
to ___________________________________________________________________________
Address _____________________________________________________________________
And certies that the boat is new and has not been registered in this or any other state; Advanced
Elements, Inc. also warrants the title of said boat at time of delivery, subject only to the liens and
encumbrances as set out below:
Amount of Lien / Date to whom due
Address __________________________________________________________________________
Dates___________________________ 20 _________, at _____________________ ____________________
By:___________________________________________________________ Transferrer (Firm name)
Sign Here ___________________________________________________________
Before me personally appeared _____________________________ who by me being duty sworn under
oath says the statements set forth above are true and correct. Subscribed and sworn to me before this
__________ day of ___________________ 20 ___________. ___________________________________
Notary Public Date commission expires_______________ (SEAL)

DECLARATION OF CONFORMITY
(according to ISO/IEC Guide 22 and EN 45014)
Manufacturer’s Name: Advanced Elements, Inc.
Manufacturer’s Address: P.O. Box 5128 Concord, CA 94524
Declares that the product:
Product Name: StraitEdgeTM Angler PRO Kayak
Model Number (s): AE1055
to which this declaration relates, meets the essential health and safety
requirements and is in conformity with the relevant EU Directives listed below:
General Product Safety Directive using the relevant section of the following EU standards and other
normative documents:
EN ISO 6185-1 : 2001
ABYC H-29: 2019
Date: January 1, 2022
Signature :
This product complies with European directives for recreational vessels as published by the
International Organization for Standardization (ISO).

If you need help or have an issue, please call us immediately toll free at 866-262-9076.
Please use the warranty registration form at: www.advancedelements.com/warranty to register your
advanced elements product.
ADVANCED ELEMENTS WARRANTY
Advanced Elements, Inc. warrants its products to be free from defects in material or workmanship
for a period of three (3) years from the date of purchase. Products that prove to be defective under
conditions of normal and proper use during the warranty period because of defective workmanship
or faulty material will be replaced, by the same product or an equivalent, or repaired without charge
at Advanced Elements sole discretion. For warranty service, contact Advanced Elements, Inc.
Advanced Elements, Inc shall inspect all warranty claims and in the event of a defect claim, it will
undertake to repair or replace the defective part or entire item (by the same product or an equiva-
lent), at its option. The purchaser must, before return of a defective product, provide reasonable
documentation to establish a defect, and obtain from Advanced Elements, Inc, a return authorization
(RA) number and return center address. Please call Toll Free at 866-262-9076 to obtain an RA number
and the return address. Once an RA is obtained, the purchaser must ship the product at their own ex-
pense, POSTAGE PREPAID, to Advanced Elements, Inc for repair. Do not ship to P.O. Box address as
it will be sent back. The purchaser must also make sure that the issued RA number is clearly marked
on the package.
Terms and Conditions:
1. Warranty Term will be three (3) years from the date of customer receipt for all non-commercial
users.
2. Warranty applies to defects in material and workmanship. This Warranty does not cover:
1. Damage due to negligence, neglect, lack of maintenance, accident, abnormal or improper
use, bad assembly or improper repair attempts, or damage resulting from improper
inflation, or damage resulting from the use of a pump not supplied by Advanced
Elements, or damage due to contact with a cleaner or chemical.
2. Modification or customization
3. Punctures, cuts, and abrasions sustained in normal use
4. Normal color fading of fabric or other materials
5. Normal wear and tear
6. Items involved in accidents; and items damaged in white water mishaps, and other
unreasonable uses or improper storage
7. Over-gluing and other aesthetic imperfections
8. Crazing, blistering and aging of fabrics, or other materials.
9. Products used for rental, for hire or in professionally guided tours and other uses not
considered normal recreational purposes
10. Consequential damages, or incidental costs such as transportation, launching, towing, or
any other resulting damages.
3. Customer must provide reasonable documentation to establish a defect, including but not
limited to:
1. Digital photographs or video clearly showing the defect
2. Troubleshooting assistance to establish or establish the cause of the problem