Advanced Poly-Packaging Advanced Poly-Bagger T-1000 Installation and user guide

Page 1of 3
Document: #HT000101
Document Title: Touch Screen Shortcuts
Product(s): T-1000, T-300/375
Procedure:
In the event that you have lost your Pass Codes, and cannot access the Bagger
settings, there are shortcuts that allow you to directly access the Level 2 Password
Screen.
On Bagger Models with a TP-220348 Touch Screen (V6) that has Function Keys on
the Right-Hand side, there are two options:
F1 –Help Screen displaying information about who to contact for Service
F5 –Passcode Entry Screen allowing entry of a Factory Passcode that will then
display Level 1 and level 2 Passcodes.
Function Keys

Page 2of 3
On later model Baggers, the Function
Keys have been eliminated from the
TP-220364 Touch Screen (TS1071).
However, there are shortcuts that
make use of keystrokes to allow access
to the Startup and Bagger Password
Setup Screens.
Shortcut Methods:
1. With Bagger in stop, press and
hold ‘Manual Cycle’ button for 3
seconds and it will take you to
Start-up screen.

Page 3of 3
2. With Bagger in stop, press ‘Manual
Cycle’ 3 times and it will take you to
‘Level 2’ password keypad. Enter
‘9876’ and it will take you to ‘Bagger
Password Setup’ screen where you can
change Level 1 or Level 2 passwords.
Enter ‘9876’.