AEE MACH6 User manual
General Manager of AEE Technology Inc.
Welcome message from the General Manager of AEE Technology Inc.
6
Table of Contents
1. Introduction...........................................................................................................................................1
1.1 Introduction....................................................................................................................................1
1.2 Safety Precautions........................................................................................................................1
1.3 UAV Preparation...........................................................................................................................3
1.4 Installation of remote controller antenna.....................................................................................11
2. Aircraft ..............................................................................................................................................12
2.1 Overview of aircraft ....................................................................................................................12
2.2 Flight mode ................................................................................................................................12
2.3 Navigation and Status Lights......................................................................................................12
2.4 Auto takeoff/landing ...................................................................................................................13
2.5 One-button route .......................................................................................................................13
2.6 Auto return .................................................................................................................................15
2.7 Radar avoidance function ..........................................................................................................16
2.8 RTK ............................................................................................................................................17
2.9 Point selection flight ...................................................................................................................18
3. Intelligent Battery ..............................................................................................................................18
3.1 Introduction ................................................................................................................................18
3.2 Functions ...................................................................................................................................18
3.3 Use of intelligent battery ............................................................................................................19
3.4 View battery level ......................................................................................................................19
4. Illustration and Functional Introduction of Remote Control and Drone Parts.....................................21
4.1 Illustration and functional introduction of remote control parts and drone parts..........................21
4.2 Illustration of drone parts ............................................................................................................23
5. Remote Control .................................................................................................................................24
5.1 Operation of remote control .......................................................................................................24
5.2 Remote control on/off ................................................................................................................24
5.3 Battery level of remote control ...................................................................................................25
5.4 Drone operation .........................................................................................................................26
5.5 Flight mode switch .....................................................................................................................29
5.6 Illustration and function for main interface of remote control .....................................................30
5.7 Illustration of setting interface ....................................................................................................35
5.8 Illustration of Map interface ........................................................................................................43
5.9 Route mission ............................................................................................................................47
6. Flight ................................................................................................................................................58
6.1 Take-off preparation ..................................................................................................................58
6.2 Requirements of flight environment ..........................................................................................58
6.3 Compass correction ..................................................................................................................58
6.4 Manual on/off ............................................................................................................................59
6.5 Basic flight ................................................................................................................................60
6.6 Usage process of GS software route planning task .................................................................61
7. FCC Warning....................................................................................................................................61
- 1 -
1. Introduction
1.1 Introduction
Thank you for purchasing the AEE Mach6 Hexcopter. This advanced UAV systems offers some key
industry leading features including but not limited to : 1) Up to 50 mins flight time, 2) Up to 13 Lbs of
paylaod lift, 3) Up to 3 Smart controlable Payloads attached to UAV at the same time.4) Smart
battery system which allows for cycle record keeping 5) All weather capability 6) Advance millimeter
radar for collision avoidance and works even at night.
1.2. Safety Precautions
☆Do not disassemble or modify the AEE unmanned aircraft system product without permission.
☆Having experienced drone pilots to guide the flight are advised.
☆Avoid starting two drones at close range simultaneously to prevent accidents.
☆Check whether all parts of the product are in good condition. No flight is allowed in case of any
damaged parts.
☆Ensure that both the video antenna and the radio antenna are installed correctly for the flight to
avoid affecting the flight and video receiving distance or causing damage to the transmitting module
inside the drone and remote controller.
☆Do not shut down the remote control and ground station in violation of the regulation during use,
so as to avoid unpredictable consequences.
☆Keep away from the running parts, and do not touch and keep away from any rotating parts while
the drone's propeller is running. Keep your head away from the propeller to avoid danger. At the
same time, ensure that the drone is kept away from small metal objects, so as to prevent danger due
to absorption of such objects by the drone.
AEEUnmanned Aircraft System
s olProfesina Leading
- 2 -
☆Ensure that the drone is the center of the circle when taking off and landing, and there are no
moving people or obstacles within a radius of 30 foot. When operating this AEE unmanned aircraft
system product, the drone should only be allowed to fly in a safe area away from the crowds, and it
is important to pay attention to your own safety and people around you.
☆Please ensure that each waypoint has a sufficient altitude (the altitude of a waypoint is that relative
to the take-off position of the drone) when editing the waypoints in order to prevent the flight route
from intersecting with mountains or buildings, which will result in the collision between the drone and
mountains or buildings during the flight.
☆Remove the protective rubber plugs when using the power battery, and put the rubber plugs back
in place after using to avoid short-circuit damage to the battery.
☆Remove the protective rubber plugs when using the power battery, and put the rubber plugs back
in place after using to avoid short-circuit damage to the battery.
☆Be sure to remove all the accessories installed on the aircraft and put them back in place after the
flight mission is completed to avoid damage to the accessories due to improper operation.
☆Please charge and discharge batteries at least once every three months to maintain the battery
(battery of UAV and remote controller).
☆Hold the fuselage when moving the drone. Do not hold the drone arm or landing gear separately,
so as to avoid damage caused by improper use.
☆Keep away from heat sources to avoid the aging deformation or even melting damage of
thermoplastic materials of the drone caused by high temperature.
☆Please follow the user's manual and do not operate in violation of local laws and regulations for
the safety of your life and property.
AEEUnmanned Aircraft System
s olProfesina Leading
- 3 -
1.3 UAV Preparation
1.3.1 Unfolding, locking and folding of drone arm as shown below:
Hold
Unfold
Complete
AEEUnmanned Aircraft System
s olProfesina Leading1 2
3 4
6
5
- 4 -
1.3.2 landing gear quick assembly & disassembly
Assembly & disassembly of long tripod as shown below: Please note there are two leg sizes depending
on the type of terrain you are launching in.
AEEUnmanned Aircraft System
s olProfesina Leading1 2
3 4
5
- 5 -
Assembly & disassembly of short tripod as shown below:
AEEUnmanned Aircraft System
s olProfesina Leading1
2
3
- 6 -
1.3.3 Propeller Installation
The positive propeller and counter propeller are marked with “CW” and “CCW” respectively.
The propellers are installed at the consequence of positive – counter – positive – counter – positive
– counter from the left side of the UAV nose. Once the propellers are matched with the UAV,
fasten with screws. (The UAV has 6 rotor arms and multiple rotors; among which, two propellers
are different from the rest 4 propellers, please install them carefully). As shown below:
1.3.4 Installation of figure & data transmission antenna and RTK antenna
As shown below:
Fold
Install
AEEUnmanned Aircraft System
s olProfesina Leadingpositive propeller
counter propeller
Other AEE Drone manuals
