AEM 800037 User manual

1
InstallaƟon of the light adapter 800077
2013 Dodge 2500/3500 Laramie , 2014 Dodge 2500/3500
Removethecoverfromthelighthousing.Unplugtwobulbconnectors.

2
Installconnectorsfrom800077adapterasshownonthepicture.

3
PlugoriginalvehicleconnectorsinRubberPlugsof800077.Note:All4RubberPlugsmustbeinverted.

4
ConnectrelaykitstoTurnSignalWirePin#12,ParkWirePin#2andDRLwirePin#4.Makethatconnec‐
on2‐3”awayfromtheendofplug.

5
Cutagroove(3/8”x3/8”)inthecoverofthelighthousing.Aerinstallaonofadapter800077runall
wiresthroughthecutout.Silicone thegrooveaerinstallaonofthecovertothelighthousing.

6
Part # Description Quantity
1 420941 Headlamp adapter 2
2 420942 Headlamp adapter 2
3 800079 Relay Harness for Park Lights 1
4 800041 Relay 4
5 761232 Butt Connector 4
6 800039 Relay Harness for daytime running lamp 1
7 HH-00455-007 #8 Screw 4
800077 Light Kit
Note:
 Relay Kit 800038 is not required with 1 piece harness
 Relay Kit 800038 is required with installation of multiple harnesses