Dogtra YS 600 User manual

1
YS600
NO BARK COLLAR
Owner's Manual
Please read this manual thoroughly
before operating the YS600.

2
WARNING
Please read all safety and product information below
before using your Dogtra product. Failure to follow
these safety instructions could result in injury to you,
your dog and others, or it could result in damage to
your Dogtra product or other property.
PRODUCT SAFETY
Training Methods
Dogtra products may be used with a variety of training
methods. However, each dog may have a different
reaction to training methods and to Dogtra products.
Closely observe your dog when determining the right
training method to use with your Dogtra product.
Aggressive Dogs
Do not use Dogtra products with aggressive dogs as such
dogs may react adversely and cause injury to people
or other dogs. Seek the assistance of a dog-training
specialist or veterinarian when dealing with aggressive
dogs.
Children
Dogtra products are not toys. Adult supervision and close
attention are necessary when Dogtra products are used
by or near children.
IMPORTANT SAFETY AND PRODUCT
INFORMATION

3
PRODUCT DAMAGE
Electrical Product
Your Dogtra product contains electrical components and
batteries. Do not use or keep your product near heat or
flammable sources. Such use or storage may damage
your product and/or cause fire, explosion, injury, or
property damage.
Medical Device Interference
Dogtra products contain electrical and magnetic
components that emit low level electromagnetic waves
and radio frequencies. These electromagnetic waves
or radio frequencies may interfere with pacemakers,
defibrillators, or other medical devices. Consult your
physician or medical device maker before using your
medical device with a Dogtra product. If you think that
your Dogtra product is interfering with your pacemaker,
defibrillator, or other medical device, stop using the
Dogtra product.
Inadvertent Activation
The digital microprocessor offers thousands of unique
codes to eliminate frequency match-up with other Dogtra
e-collars. The Constant button will automatically shut
down after being held down for 12 seconds or more as a
safety feature.

4
UNAUTHORIZED USE
Your Dogtra product should be used only in a humane
manner to train and educate your dog. Dogtra products
are not intended for use in any other manner nor are they
intended for use with other animals or with humans.
BATTERY
Your Dogtra product contains batteries. Take care when
removing and installing batteries as your fingers may get
caught. Dispose of batteries as provided by your local
regulations. Do not disassemble, crush, heat, or otherwise
alter the battery as it may cause fire, injury or property
damage.

5
AT A GLANCE ...................................................................
MAIN FEATURES .............................................................
OVERVIEW .......................................................................
USING THE ON/OFF & STIMULATION DIAL .............
LED INDICATOR ..............................................................
OPERATING MODES .......................................................
PERSISTENT BARK INDICATOR ..................................
TESTING THE YS600 ......................................................
CHARGING THE BATTERY ............................................
RECEIVER FITTING .........................................................
MAINTENANCE ...............................................................
TROUBLESHOOTING GUIDE ........................................
WARRANTY AND REPAIR INFORMATION ...............
6
6
7
8
9
9
10
11
12
14
16
17
19
CONTENTS

6
AT A GLANCE
YS600
No Bark Collar
Battery
Charger
Owner's
Manual
MAIN FEATURES
• Ultra-Compact Receiver
• 2-Hour Rapid Charge Batteries
• Persistent Bark Indicator
• 10 Intensity Levels
• High Performance Pager
• Accelerometer Bark Sensor
• Enhanced Contact Points
• For Dogs as Small as 35 lbs.
• IPX9K Waterproof Certified
• High Stimulation

7
OVERVIEW
LED Indicator
Light
On/Off &
Stimulation Dial
Sensor Battery Charging
Receptacle &
Rubber Plug
Contact Points
Collar Strap

8
- The On/Off & Stimulation Dial is used to turn the YS600
on/off and to select the stimulation level.
- Set the dial to “.” to turn off the YS600.
- Set the dial to “P” for HPP (High Performance Pager)
vibration only mode.
- The YS600 has stimulation levels 1 (lowest)
through 10 (highest). Each stimulation level begins with
a vibration and is followed by the stimulation.
- Set the dial to “T” to test the YS600. See Testing the
YS600 on page 11 to check if your unit is working
properly.
On/Off & Intensity Dial Function
• Power Off
P (HPP) High Performance Pager Vibration
1~10 Stimulation Level
T Test Mode
USING THE ON/OFF &
STIMULATION DIAL
NOTICE
When first using the YS600 No Bark Collar, it is
recommended to start at the lowest stimulation level.
If your dog continues to bark, gradually increase the
stimulation level. Closely monitor your dog’s reaction to
find the right stimulation level for your dog.

9
OPERATING MODES
1. HPP (High Performance Pager) Vibration - (P)
- The YS600 will vibrate twice when your dog barks. No
stimulation will be activated when set to “P”.
2. Stimulation Levels (1-10)
- The YS600 will vibrate once followed by a stimulation
when your dog barks.
* There is a 15 second safety delay between the
stimulation on levels 1-10 and vibration on P mode.
Battery life
LED window
Full charge Medium charge Needs charge
In Use Green Amber Red
Charging Green Red Red
The LED indicator will flash for 1 second when the YS600
has been turned on and every 4 seconds afterwards. If
your dog does not bark for over 30 seconds, the LED
indicator will turn off and the YS600 will go into a sleep
mode to conserve battery life. It will reactivate when your
dog barks and a vibration/correction needs to be made.
Before going into sleep mode, the LED light flashes green
when the battery is fully charged and turns to amber
when the battery life is getting low. When the LED
indicator emits a blinking red light, the battery needs to
be recharged.
LED INDICATOR

10
The Persistent Bark Indicator activates when the unit is
turned off and there has been excessive barking.
1. Without excessive barking:
– The LED will glow red for 2 seconds when the unit is
turned off.
2. With excessive barking:
– The LED will blink green for 10 seconds when the unit is
turned off.
– Excessive barking may indicate that the stimulation
level is set too low.
* Before increasing the stimulation level, check to see
that the receiver has a proper fit and both contact
points are touching your dog’s neck.
PERSISTENT BARK INDICATOR