AER Basic Performer User manual

The Basic Performer is a solution for Bass and instruments of
the lower registers based on the experience of multiplying well
proven AER acoustic systems.
Small twin-cone systems are fast, provide a superior coverage
for the critical mid-range and have enough substance in the low
end.
The AER band-pass/bass-reex cabinet design supports the
reproduction of even the lowest frequencies with denition.
High-End preamps, proper lters and additional professional
sound design make the Basic Performer a multitalented alround
solution.
The sound characteristics are full range thus open and light
yet breathing as well as grumbling and surprisingly appropriate
for far more instruments than the bass-related instruments, e. g.
harp, cello, accordion…
• 4 x 50 watts, dynamic control
• 4 x 8“ twin-cone speaker system
• Twin-channel acoustic system
• Compressor and notch lter
• 23,00 kg (50.72 lbs)
Inputs
channel 1 Combo socket XLR + 6.3 mm (1/4”) input jack socket
as high-qaulity line- or balanced microphone input
stage with switchable phantom power voltage.
channel 2 6.3 mm (1/4”) input jack socket as high-impedance
line input stage with switchable 9 V phantom power
and pad-switch (high/low attenuation).
Tone Controls
equalizer three band tone controls for both channels
colour ‘mid-cut-treble-boost’-lter
eect Compressor, notch lter
Power
power amp 4 x 50 W / 4 ohms, dynamic control
analog signal subsonic lter, low distortion
processing RMS limiter
Speaker Systems
4 x 8“ twin-cone speaker system
Features
tape in, headphones, tuner, insert, line out, DI-out,
send, return, footswitches (eect on/o,
solo/ensemble, mute channels)
Accessories
softcover
Specications
cabinet 15 mm (0.59”) nnish birch plywood
nish waterbased acrylic, black spatter nish
dimensions 485mm x 365 mm x 400 mm
(19.10“ x 14.37 “ x 15.70“), HxWxD
weight 23,00 kg (50.72 lbs)
Can be combined with
AS 550/D sub
AS Q8
b a s s
solutions
Basic Performer
advanced level