Aetertek AT-919A User manual

R
Owner’s Manual for Professional Anti-bark Dog Trainer AT-919A
www.aetertek.com
AT-919A

Description 1
System Components----------------------------------------------2
Quick Start--------------------------------------------------------3
Training Tips--------------------------------------------------4
Safety Guide--------------------------------------------------5
Information on Terms of Use & Limitation of Liability---------6
Warranty Card---------------------------------------------------7~8
----------------------------------------------------------

AT919A series trainers are designed for easy, effective operation and are the most compact and efficient
dog training systems on the market today. Among the many powerful features that set these systems apart
from any other is the advanced anti bark intelligent technology.
The AT919A has a unique dog bark idenfication technology which identifies pattern barking, then triggers
the proper correction. For example, the first bark will trigger an ultrasonic beep, if the barking continues or
gets louder, a vibration correction will be issued. If the barks get even louder and more frequent, a shock
correction will be administered. Continued barking will cause the intensity of shocks to increase. If the barks
decrease or stop, the corrections decrease or stop automatically.
Unlike most anti bark trainers on the market, the AT919A series intelligently distinguishes excessive barking
from normal behaviors such as scratching or running, thereby preventing false corrections.
The 919A is stylish, lightweight, and completely waterproof.
R
Anti-bark Dog Trainer
AT-919A
Description
-01-

R
Anti-bark Dog Trainer
AT-919A
Trainer
Magnet
Prongs
Test Kit
Collar
Charger
Anti-bark Dog Trainer
-02-
AT-919A System Components
Prongs Test Kit Collar Charger
Magnet

Step 2:
Charge the trainer. Lift the
small rubber tab on the trainer to access
the charging port.
traine
Plug the wall charger
into the wall socket and into the charging
port of the r.A red led light will
be visible on the trainer during the
charging process.
1
2
Step 1: Screw the metal
prongs onto the trainer till
the prongs are securely
attached. Normally, they
are assembled in the factory.
Step 3: To turn on/off the trainer, just make the magnet touch the magnet switch on the trainer until the
vibrates. The red and blue lights will flash once and the will beep.trainer trainer
Quick Start
-03-
Tip 2: To do a self-test, place the magnet near to the ON/OFF area on the trainer for 3 times, and the trainer will beep, vibrate or shock with the
blue light on, indicating the trainer works normally.
3
ON/OFF area
Place the magnet near to the magnet switch
on the trainer until the vibrates. The
red light will be on, indicating that the
is started. Just repeat the above steps to turn
off this trainer.
trainer
trainer
Tip 1: It is recommend to charge the trainer for up to 8 hours for the first 3 times.