AFi R-29572X User manual

ASSEMBLY INSTRUCTIONS
Before assembling your bed, please read through these
ATTENTION! If you receive a damaged or defective item,
please contact afifurnishings at [email protected] or 1-800-955-3726
READY
ASSEMBLE
TO
instructions carefully and familiarize yourself with the different parts.
Congratulations!
Your headboard is now assembled.
To ensure lasting safety, we recommend that you periodically check
that all screws are tight and all parts are secure.
BED WITH MATCHING FOOTBOARD
Instructions apply for bed sizes
TWIN
PARTS LIST HARDWARE
HEADBOARD PANEL 1 PC
1
2
3
4
1 PC
1 PC
1 PC
LEFT LEG
RIGHT LEG
FOOTBOARD
Allen wrench - 1pc
Spare - 1pc
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
JCB M6 X 40mm (1 1/2”) - 6 pcs
Spare - 1 pc
B
C
AWooden dowel - 4 pcs
Spare - 1 pc
Adult assembly
Page 1 of 2
Step 1
Attach the legs (2) and (3) to headboard panel (1),
using wooden dowels (A) and JCB (B).
Tighten with the Allen wrench (C).
Adult assembly
1
2
3
A
A
B
B
B
B
B
B
A
A
PO:
CODE ITEM
HBFB-CYN R-29572X

Page 2 of 2
01
02
03
04
05
HARDWARE
HEADBOARD
FOOTBOARD
SIDE RAILS
SLAT KIT
BOX 1
04
04 04
02
03
Attach the side rails (04) to the headboard (02) and footboard (03) using the bed hook as shown below.
Step 1
Adult assembly
Adult assembly
Step 2
BOX 2
Attach slat kit (05) onto the bed. For assembly of slat kit, follow the assembly instructions
included with bed frame.
05
05
UPPER
LOWER
Use the upper set of pins when
using mattress only, storage drawers
or Trundle bed. Use the lower set of
pins if using foundation and mattress.

ASSEMBLY INSTRUCTION
( TWIN )
Before assembling your bed slat kit, please read through these
instructions carefully and familiarize yourself with the different parts.
PARTS LIST
Step 1
Please note that you will require a Phillips screwdriver.
Assemble bed frame or bunk bed according to assembly instructions.
SLAT KIT 1 SET
01
A
Page 1 of 1
HARDWARE
1 1/4” Wood screw - 28 pcs Spare - 2 pcs
Lay the slat kit onto the bed.
PLATFORM BED
BUNK BED
Screw slat kit (01) to side rail, using wood screw (A).
Tighten with Phillips screwdriver. (Customer supplied)
Be sure the space between slats is even.
WEBBING MUST FACE UP
WEBBING MUST FACE UP
NOTE: WEBBING MUST FACE UP
SLAT KIT
A
Wood screw
Be sure to align slat kit evenly with both
ends of side rail.
01
ATTENTION! If you receive a damaged or defective item,
please contact afifurnishings at [email protected] or 1-800-955-3726
READY
ASSEMBLE
TO
Step 2 A
A
A
01
01
PO :
Adult assembly
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
CODE ITEM
SL-PF E-65000

READY
ASSEMBLY INSTRUCTIONS
Before assembling your bed drawer, please read through these
instructions carefully, familiarize yourself with the different parts.
BED DRAWER
Page 1 of 2
HARDWARE
A B
JCB M6 X 1 1/8”( 30mm ) - 16 pcs
Spare - 2 pcs
E
Allen wrench - 1 pc
Spare - 1 pc
Allen wrench
NOTE : WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
ATTENTION! If you receive a damaged or defective item,
please contact afifurnishigs at [email protected] or 1-800-955-3726
PO :
Adult assembly
Adult assembly
PARTS LIST
01
02
03
HARDWARE 1 BOX
2 PCS
4 PCS
DRAWER FACE
DRAWER SIDE
04
05
2 PCS
2 PCS
DRAWER BACK
DRAWER BOTTOM
01
04
02
03
03
05
Step 1
Lay the drawer face (02) on smooth, flat surface so the groove is facing upwards. Fit the drawer
side (03) to drawer face (02), Use JCB M6 X 1 1/8” (A), align groove inside panel with groove in
drawer face. Tighten with Allen wrench (B).
02
03
03
A
A
A
B
JCB M6 X 1 1/8”
Allen wrench
CODE ITEM ITEM
ST-DR-UBN
E-6683X E-6684X

Adult assembly
Adult assembly
Page 2 of 2
05
Guide the drawer bottom (05) in carefully so
that it won’t jump out of its grooves. Be sure it
fits fully into its groove at the bottom
(in the drawer face) before fitting the drawer back.
Attach drawer back (04) to bed drawer
assembly as shown. Use JCB M6 X 1 1/8”(A).
Tighten with Allen wrench (B).
04
A
B
JCB M6 X 1 1/8”
Allen wrench
A
A
Step 2 Step 3
Congratulations!
Your Urban lifestyle bed drawers are now ready for use.
We recommend that you recheck that all screws are tight