Target Brookline MOR02 User manual

>> assembly instructions
Brookline
tufted counter/bar stool
style # MOR02 / MOR03

hardware
tools needed
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your room
in no time. Good luck —
before you begin
1. Check for damaged or missing parts. Call 855-MYTGTHOME(855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
2
(H1) x 2
short bolt 2 in.
(H2) x 10 (H3) x 10
spring washer
(H5) x 4
long bolt 3½ in
(H7) x 1
hex wrench
(H6) x 4
screw 1 in.
(H4) x 4
medium bolt 2½ in.

ITEM DESCRIPTION QUANTITY
A chair back 1
B chair seat 1
C pre-assembled front leg set 1
E right facing rail 1
F left facing rail 1
B
3
A
E
C
F

step 1.
1. Peel back fabric cover on chair seat.
2. Attach chair seat to chair back.
into the center section. Do not tighten bolts as you will level and
tighten in step 5.
(short bolt)
(H3) x 2
spring washer
(H1) x 2
short bolt 2 in.
(H2) x 2 (H7) x 1
hex wrench
12-3 4
4

step 2.
1. Finish attaching chair seat to chair back, a long bolt, spring
2. Do not tighten bolts as you will level and tighten in step 5.
(long bolt)
1
(H3) x 4
spring washer
(H5) x 4
long bolt 3½ in
(H2) x 4 (H7) x 1
hex wrench
5

step 3.
1. Place chair on a secure table or platform while assembling.
2. Attach front legs to chair using medium bolt, spring washer, and
3. Do not tighten bolts as you will level and tighten in step 5.
(medium bolt)
2
(H4) x 4
medium bolt
(H3) x 4
spring washer
(H2) x 4 (H7) x 1
hex wrench
6

step 4.
1. Slide rails into legs matching the stickers for
correct positioning.
2. Secure rails with the screws.
(H6) x 4
screw 1 in.
2
1
7

step 5.
1. Turn chair upright on a level surface, push legs up or
down as necessary to level.
2. Once leveled, tighten all bolts securely with hex wrench.
3. Adjust leveler, as shown in illustration, to help with
leveling process.
1 2
3
(H7) x 1
hex wrench
8

step 6.
1. Pull fabric cover back.
2. For additional assembly help or missing parts, call 855-MYTGTHOME (855-698-4846).
9

© 2008 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.