AFi ATLANTIC OXFORD User manual

Adult assembly
Before assembling your headboard and footboard, please read through these
Page 1 of 2
Step 1
Step 3
Instructions apply for bed sizes
PARTS LIST HARDWARE
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [e-mail] or 1-800-955-3726
READY
ASSEMBLE
TO
instructions carefully and familiarize yourself with the different parts.
HEADBOARD PANEL BOARDS 4 PCS 1
2
3
4
5
6
7
8
1 PC
1 PC
1 PC
3 PCS
1 PC
1 PC
1 PC
LEFT LEG
RIGHT LEG
HEADBOARD SUPPORT
FOOTBOARD PANEL BOARDS
LEFT FOOTBOARD LEG
RIGHT FOOTBOARD LEG
FOOTBOARD SUPPORT
Allen wrench M4 - 1pc
Allen wrench M6 - 1pc
Spare - 1pc
Spare - 1pc
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
D
E
A
Attach left footboard leg (6) and right footboard leg(7)
to footboard panel boards (5) using JCB M6 X 35mm (A).
Tighten with the Allen wrench M4 (D).
Adult assembly
JCB M6 X 35mm
Wood Screw
1
5
8
6
24
3
C
C
A
C
A
A
A
A
JCB M8 X 15mm ( 5/8") - 8 pcs
Wood screw ( 1 1/4") - 7 pcs
B
C
B
C
Step 2
Step 4
Attach left leg (2) and right leg (3) to headboard
panel boards (1) using JCB M6 X 35mm (A).
Tighten with the Allen wrench M4 (D).
Attach headboard support (4) to
headboard panel boards using wood
screw 1 1/4" (C) Tighten with the
Phillips head screw driver.
(Customer supplied)
Attach footboard support (8) to
footboard panel boards using wood
screw 1 1/4" (C). Tighten with the
Phillips head screwdriver.
(Customer supplied)
7
JCB M6 X 35mm - 28 pcs
Spare - 1 pc

Page 2 of 2
01
02
03
01
04
05
HARDWARE
HEADBOARD
FOOTBOARD
SIDE RAILS
SLAT KIT
HARDWARE
04
04
03
02
Attach the side rails (04) to the headboard (02) and footboard (03) using JCB M8 X 15mm (B).
Tighten with Allen wrench M6 (E).
Step 1
READY
ASSEMBLE
TO
OXFORD BED WITH MATCHING FOOTBOARD
Adult assembly
Adult assembly
Step 2
JCB M8 X 15mm
B
05
05
Congratulations!
Your bed is now ready for use.
We recommend that you periodically recheck that all screws are tight to ensure lasting safety.
B
B
Attach slat kit (05) onto the bed using wood screws. Tighten with Phillips head screw driver.
(customer supplied) For assembly of slat kit, follow the assembly instructions included with
slat kit.

Before assembling your bed drawer, please read through these
instructions carefully, familiarize yourself with the different parts.
BED DRAWER SET OF 2
Page 1 of 2
HARDWARE
A B C
JCB M6 X 1”( 25mm ) - 16 pcs Wood Screw X 1 1/4”( 32mm ) - 4 pcs
Spare - 1 pc Spare - 1 pc
E
Allen wrench - 1 pc
Spare - 1 pc
Allen wrench
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at [e-mail] or 1-800-955-3726
Adult assembly
Adult assembly
PARTS LIST
01
02
03
HARDWARE 1 BOX
1 PC
2 PCS
DRAWER FACE
DRAWER SIDE
04
05
06
07
1 PC
2 PCS
1 PC
1 PC
DRAWER BACK
DRAWER BOTTOM
DRAWER MIDDLE
DRAWER CENTER SUPPORT
01
04
02
03
03
05
05
06
07
Step 1
Lay the drawer face (02) on smooth, flat surface so the drawer bottom (05) groove is facing upwards.
Attach the drawer sides (03) to drawer face (02) using JCB M6 X 1” (A). Align groove inside drawer
side with groove in drawer face. Tighten with Allen wrench (C).
A
C
JCB M6 X 1”
Allen wrench
03
03
02
A
AGROOVE

Page 2 of 2
05
05
06
06
07
07
05
05
Guide the drawer bottoms (05) and drawer middle (06) in carefully so that they align inside grooves. Be sure
it fits fully into the face and side groove before attaching the drawer back (04).
Attach drawer center support (07) to bottom of drawer face using wood screw 1 1/4" (B). Tighten with
Phillips head screw driver. (Customer supplied)
Attach drawer back (04) to bed drawer
assembly as shown. Use JCB M6 X 1”(A).
Tighten with Allen wrench (C). Use wood
screws 1 1/4" (B) to finish attaching drawer
center support (07) to drawer back (04)
Tighten with Phillips head screw driver.
(customer supplied)
Lastly, insert bed drawer to the bed as
shown below.
Step 2
Step 3 Step 4
Congratulations!
Your bed drawer is now ready for use.
A
B
A
04
BACK VIEW
B
B
Adult assembly
Adult assembly
We recommend that you periodically recheck that all screws are tight to ensure lasting safety.
A
B
C
JCB M6 X 1”
Wood Screw 1 1/4"
Allen wrench
B
Wood Screw 1 1/4"
BED DRAWER SET OF 2