AG Neovo RX-22G User manual

RX-22G & RX-24G LCD Monitor
User Manual
displays.agneovo.com

TABLE OF CONTENTS
2
Safety Information
Federal Communications Commission (FCC) Notice (U.S. Only)............................................................4
WEEE.......................................................................................................................................................5
Precautions
Notice.......................................................................................................................................................6
Cautions When Setting Up.......................................................................................................................6
Cautions When Using...............................................................................................................................7
Cleaning and Maintenance.......................................................................................................................7
Notice for the LCD Display.......................................................................................................................8
Chapter 1: Product Description
1.1 Package Contents..............................................................................................................................9
1.2 Wall Mounting Installation Preparation...............................................................................................10
1.2.1 Wall Mounting..........................................................................................................................10
1.2.2 Removing the Base Stand.......................................................................................................11
1.3 LCD Display Overview .......................................................................................................................12
1.3.1 Front View and Keypad Buttons..............................................................................................12
1.3.2 Rear View................................................................................................................................13
Chapter 2: Making Connections
2.1 Connecting the Power........................................................................................................................14
2.2 Connecting Input Source Signals.......................................................................................................15
2.2.1 Connecting a Computer ..........................................................................................................15
Using VGA Cables ......................................................................................................................... 15
Using DVI Cables...........................................................................................................................15
Using HDMI Cables........................................................................................................................16
Using DisplayPort Cables ..............................................................................................................16
Using RS232 Cables......................................................................................................................17
Using Audio Cables........................................................................................................................17
2.2.2 Connecting a Video Device.....................................................................................................18
Using Composite (CVBS) Cables ..................................................................................................18
Using S-Video Cables....................................................................................................................19
Using HDMI Cables........................................................................................................................19
Using DisplayPort Cables ..............................................................................................................20
Chapter 3: Using the LCD Display
3.1 Turning on the Power.........................................................................................................................21
3.2 Selecting the Input Source Signal......................................................................................................21
3.3 Adjusting the Volume..........................................................................................................................22
3.3.1 Muting the Audio......................................................................................................................22
3.4 Choosing Your Preferred Picture Settings..........................................................................................22
3.5 Using Picture-in-Picture (PIP) ............................................................................................................23
3.5.1 PIP/PBP Options.....................................................................................................................23
3.5.2 PIP/PBP Swap ........................................................................................................................24
3.6 Using FREEZE Function....................................................................................................................24

3
TABLE OF CONTENTS
3.7 Using Auto Adjustment Function ........................................................................................................25
3.8 Using ROTATE Function ....................................................................................................................25
3.9 Locking the OSD Menu......................................................................................................................26
Chapter 4: On Screen Display Menu
4.1 Using the OSD Menu .........................................................................................................................27
4.2 OSD Menu Tree .................................................................................................................................29
Chapter 5: Adjusting the LCD Display
5.1 Brightness ..........................................................................................................................................32
5.2 Colour Temp.......................................................................................................................................34
5.3 Image Setting.....................................................................................................................................35
5.4 Aspect Ratio.......................................................................................................................................38
5.5 PIP Setting .........................................................................................................................................39
5.6 Anti-Burn-in.........................................................................................................................................41
5.7 OSD Setting .......................................................................................................................................42
5.8 Audio Setting......................................................................................................................................43
5.9 System 1 ............................................................................................................................................44
5.10 System 2 ..........................................................................................................................................46
5.11 EcoSmart Sensor .............................................................................................................................48
5.12 Input Select ......................................................................................................................................50
Chapter 6: Appendix
6.1 Warning Messages.............................................................................................................................51
6.2 Supported Resolutions.......................................................................................................................52
6.3 Troubleshooting..................................................................................................................................53
6.4 Transporting the LCD Display ............................................................................................................55
Chapter 7: Specications
7.1 Display Specications ........................................................................................................................57
7.2 Display Dimensions............................................................................................................................58
7.2.1 RX-22G Dimensions................................................................................................................58
7.2.2 RX-24G Dimensions................................................................................................................58

SAFETY INFORMATION
4
Safety Information
F ederal Communications Commission ( F CC) N otice ( U. S. Only)
This eq uipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This eq uipment generates,
uses and can radiate radio freq uency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this eq uipment
does cause harmful interference to radio or television reception, which can be determined
by turning the eq uipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the eq uipment and receiver.
• Connect the eq uipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an exp erienced radio/TV technician for help.
anes o oications not epessly appoe y te paty esponsile o copliance col
void the user’ s authority to operate the eq uipment.
Use only an RF shielded cable that was supplied with the display when connecting this display to a computer
device.
o peent aae ic ay eslt in e o soc aa o not epose tis appliance to ain o ecessie
moisture.
THIS CLASS B DIGITALAPPARATUS MEETS ALL REQ UIREMENTS OF THE CANADIAN INTERFERENCE-
CAUSING EQ UIPMENT REGULATIONS.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

5
SAFETY INFORMATION
W E E E
Information for users applicable in European Union countries.
e syol on te poct o its pacain sinies tat tis poct as to e
disposed separately from ordinary household wastes at its end of life. Please
inly e aae tat tis is yo esponsiility to ispose electonic eipent at
recycling centers so as to help conserve natural resources. Each country in the
European Union should have its collection centers for electrical and electronic
eq uipment recycling. For information about your recycling drop off area, please
contact your local related electrical and electronic eq uipment waste management
authority or the retailer where you bought the product.

PRECAUTIONS
6
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Symb ols used in this manual
This icon indicates the exi stence of a potential haza rd that could result in personal injury
or damage to the product.
This icon indicates important operating and servicing information.
N otice
• Read this User Manual carefully before using the LCD display and keep it for future reference.
• e poct specications an ote inoation poie in tis se anal ae o eeence only. ll
information is subject to change without notice. Updated content can be downloaded from our web site at
displays. agneov o. com.
• To register online, go to displays. agneov o. com.
• To protect your rights as a consumer, do not remove any stickers from the LCD display. Doing so may
affect the determination of the warranty period.
Cautions W hen Setting Up
Do not place the LCD display near heat sources, such as a heater, exh aust vent, or in direct
sunlight.
Do not cover or block the ventilation holes in the housing.
Place the LCD display on a stable area. Do not place the LCD display where it may subject
to vibration or shock.
Place the LCD display in a well-ventilated area.
Do not place the LCD display outdoors.
Do not place the LCD display in a dusty or humid environment.
Do not spill liq uid or insert sharp objects into the LCD display through the ventilation holes.
Doin so ay case acciental e electic soc o aae te D isplay.
Precautions

7
PRECAUTIONS
Cautions W hen Using
Use only the power cord supplied with the LCD
display.
The power outlet should be installed near the LCD
display and be easily accessible.
If an ext ension cord is used with the LCD display,
ensure that the total current consumption plugged
into the power outlet does not exce ed the ampere
rating.
Do not allow anything to rest on the power cord. Do
not place the LCD display where the power cord
may be stepped on.
 te D isplay ill not e se o an inenite
period of time, unplug the power cord from the
power outlet.
To disconnect the power cord, grasp and pull by the
plug head. Do not tug on the cord; doing so may
case e o electic soc.
Do not unplug or touch the power cord with wet
hands.
Cleaning and Maintenance
The LCD display comes with NeoVTM Optical
Glass. Use a soft cloth lightly moistened with a mild
detergent solution to clean the glass surface and the
housing.
Do not rub or tap the surface of the glass with sharp
or abrasive items such as a pen or screwdriver. This
may result in scratching the surface of the glass.
Do not attempt to service the LCD display yourself,
ee to alie seice pesonnel. penin o
removing the covers may exp ose you to dangerous
voltage or other risks.
W arning:
Unplug the power cord
from the power outlet and
ee to alie seice
personnel under the following
conditions:
When the power cord is
damaged.
If the LCD display has been
dropped or the housing has
been damaged.
If the LCD display emits smoke
or a distinct odor.
W arning:
Ceiling mount or mount
on any other horizo ntal
surface overhead are not
advisable.
Installation in contravention of
the instructions may result in
undesirable conseq uences,
particularly hurting people and
damaging property. Users who
have already mounted the
display on the ceiling or any
other horizo ntal surface overhead
are strongly advised to contact
 eoo o consltations an
solutions to help ensure a most
pleasale an lllin isplay
exp erience.

8
PRECAUTIONS
N otice for the LCD Display
In order to maintain the stable luminous performance, it is recommended to use low brightness setting.
Due to the lifespan of the lamp, it is normal that the brightness q uality of the LCD display may decrease
with time.
When static images are displayed for long periods of time, the image may cause an imprint on the LCD
display. This is called image retention or burn-in.
To prevent image retention, do any of the following:
• Set the LCD display to turn off after a few minutes of being idle.
• Use a screen saver that has moving graphics or a blank white image.
• Switch desktop backgrounds regularly.
• st te D isplay to lo itness settins.
• Turn off the LCD display when the system is not in use.
Things to do when the LCD display shows image retention:
• Turn off the LCD display for ext ended periods of time. It can be several hours or several days.
• Use a screen saver and run it for ext ended periods of time.
• Use a black and white image and run it for ext ended periods of time.
When the LCD display is moved from one room to another or there is a sudden change from low to high
ambient temperature, dew condensation may form on or inside the glass surface. When this happens, do
not turn on the LCD display until the dew disappears.
Due to humid weather conditions, it is normal for mist to form inside the glass surface of the LCD display.
The mist will disappear after a few days or as soon as the weather stabilize s.
There are millions of micro transistors inside the LCD display. It is normal for a few transistors to be
damaged and to produce spots. This is acceptable and is not considered a failure.

9
CHAPTER 1: PRODUCT DESCRIPTION
1. 1 Package Contents
When unpacking, check if the following items are included in
the package. If any of them is missing or damaged, contact your
dealer.
Q uick Start G uide
Pow er cord
N ote:
The pictures are for reference
only. Actual items may vary
upon shipment.
V G A cab le
Pow er adapter
RX-22G & RX-24G
displays.agneovo.com
RX-22G/RX-24G_Quick Guide_V010
Quick Start Guide
RX-22G & RX-24G LCD Monitor
LCD Display
Audio cab le
N ote:
Must use only the supplied power
adapter:
ADAPTER TECH
Model no.: ATS040T-P120
Rating: 12V/3.3A
DELTA ELECTRONICS, INC.
Model no.: ADP-40DD B
Rating: 12V/3.33A
Lite-on Technology Corporation
Model no.: PA-1041-81
Rating: 12V/3.33A
Chapter 1: Product Description
W arranty card

10
PRODUCT DESCRIPTION
1. 2 W all Mounting Installation Preparation
1. 2. 1 W all Mounting
1R emov e the b ase stand.
See procedures below.
2W all mount the LCD display.
Screw the mounting bracket to the VESA holes at
the rear of the LCD display.
100 mm
75 mm
100 mm 75
mm
N ote:
Take measures to prevent the
LCD display from falling down
and lessen possible injury and
damage to the display in case of
earthq uakes or other disasters.
Use only the 75 x 75 mm and
100 x 100 mm wall mount kit
recommended by AG Neovo.
Secure the LCD display on a
solid wall strong enough to bear
its weight.
N ote:
To protect the glass panel, place a
towel or soft cloth before laying the
LCD display down.
W arning:
Ceiling mount or mount
on any other horizo ntal
surface overhead are not
advisable.
Installation in contravention of
the instructions may result in
undesirable conseq uences,
particularly hurting people and
damaging property. Users who
have already mounted the
display on the ceiling or any
other horizo ntal surface overhead
are strongly advised to contact
AG Neovo for consultations and
solutions to help ensure a most
pleasale an lllin isplay
exp erience.

11
PRODUCT DESCRIPTION
1. 2. 2 R emov ing the B ase Stand
1 ay te D isplay ace on on a at een sace.
2 Remove the screws* securing the base stand from the LCD
display.
3 Detach the base stand.
N ote:
(* ) The screw size is M4 x 10mm.

12
PRODUCT DESCRIPTION
1. 3 LCD Display Ov erv iew
1. 3. 1 F ront V iew and K eypad B uttons
53 64 871 2
1AUT O
Hot Key: Auto Adjustment/Rotate
• For VGA input signal source, press to
perform auto adjustment.
• Press for 3 seconds to enable the Rotate
function.
• When OSD menu is ON, press to close the
OSD menu or exi t a submenu.
2LE F T
Hot Key: Audio Volume Adjustment
• Press to display the volume bar. Then press
the LEFT key to decrease the volume.
• When OSD menu is ON, press to select an
option or adjust the settings.
3R IG H T
Hot Key: Screen Freeze
• Press to activate the screen freeze function.
To deactivate, press any key exce pt for the
Power key.
• When the volume bar appears, press to
increase the volume.
• When OSD menu is ON, press to select
and option, adjust the settings, or enter the
submenu.
4UP
Hot Key: PIP/PBP Select
• Press repeatedly to select PIP/PBP option
    .
• When OSD menu is ON, press to select an
option or adjust the settings.
5DOW N
Hot Key: PICTURE MODE Select
• Press repeatedly to select PICTURE MODE
option (
STANDARD    D  s ).
• When OSD menu is ON, press to select an
option or adjust the settings.
• When PIP is ON, press to swap the PIP main
and sub picture.
6ME N U
Press to display/hide the OSD menu.
7SOUR CE
Press to select the input signal source.
8POW E R and LE D Indicator
• Press to turn the power on or off.
• Indicate the operating status of the LCD
display:
- Lights Green when the LCD display is
turned on.
- Lights Amber when the LCD display is in
standby mode.
- Lights Off when the LCD display is turned
off.

13
PRODUCT DESCRIPTION
1. 3. 2 R ear V iew
S-VIDEO
COMPOSITE-1
AUDIO
IN
L
R
IN
OUT
COMPOSITE-2
IN
OUT
AUDIO
OUT
L
R
USB (SERVICE)
RS232
AUDIO INDVIDC IN HDMIDisplayPortVGA
1DC IN
Connect with the supplied power adaptor.
2DV I
Connect DVI signals input.
3H DMI
Connect HDMI signals input.
4DisplayPort
Connect DisplayPort signals input.
5V G A
Connect VGA signals input.
6AUDIO IN
Connect audio signals input (3.5 mm Stereo
Audio Ja ck).
7S- V IDE O
Connect S-Video signals input.
8COMPOSIT E - 1/ COMPOSIT E - 2 IN
Connect Composite (CVBS) signals input.
9COMPOSIT E - 1/ COMPOSIT E - 2 OUT
Connect Composite (CVBS) signals output.
10 AUDIO IN
Connect audio signals input (RCA Stereo
Audio Ja ck).
11 AUDIO OUT
Connect audio signals output (RCA Stereo
Audio Ja ck).
12 USB ( SE R V ICE )
Connect USB 2.0 for service.
13 R S232
Connect RS232 input from ext ernal
eq uipment.
1 2 3 4 5 6
7
8
9
8
9
12
13
10
11

CHAPTER 2: MAKING CONNECTIONS
14
2. 1 Connecting the Pow er
1Connect the power cord to the power adapter.
2Connect the power adapter to the DC power input at the rear of the LCD display.
3Connect the power cord plug to a power outlet or a power supply.
DC IN
Caution:
Make sure that the LCD display is
not connected to the power outlet
before making any connections.
Connecting cables while the power
is ON may cause electric shock or
personal injury.
Caution:
When unplugging the power cord,
hold the power cord by the plug
head. Never pull by the cord.
Chapter 2: Making Connections

15
MAKING CONNECTIONS
2. 2 Connecting Input Source Signals
2. 2. 1 Connecting a Computer
Using V G A Cab les
Connect one end of a VGA cable to the VGA connector of the LCD display and the other end to the VGA
connector of the computer.
VGA
Using DV I Cab les
Connect one end of a DVI (DVI-D) cable to the DVI connector of the LCD display and the other end to the DVI
connector of the computer.
DVI

16
MAKING CONNECTIONS
Using H DMI Cab les
Connect one end of an HDMI cable to the HDMI connector of the LCD display and the other end to the HDMI
connector of the computer.
HDMI
Using DisplayPort Cab les
Connect one end of a DisplayPort cable to the DisplayPort connector of the LCD display and the other end to
the DisplayPort connector of the computer.
DisplayPort

17
MAKING CONNECTIONS
Using R S232 Cab les
Connect one end of an RS232 cable to the RS232 connector of the LCD display and the other end to the
RS232 connector of the computer.
RS232
Using Audio Cab les
Connect one end of an audio cable to the AUDIO IN connector at the rear of the LCD display and the other
end to the audio out connector of the computer.
AUDIO IN

18
MAKING CONNECTIONS
2. 2. 2 Connecting a V ideo Dev ice
Using Composite ( CV B S) Cab les
Connect one end of a Composite (CVBS) cable to the COMPOSITE 1 / COMPOSITE 2 IN connector of the
LCD display and the other end to the Composite (CVBS) connectors of your device.
For audio input, connect an RCA cable to the AUDIO IN connectors of the LCD display and the audio out
connector of your device.
For video looping, connect one end of a Composite (CVBS) cable to the COMPOSITE 1 / COMPOSITE 2
OUT connector of the LCD display and the other end to the COMPOSITE 1 / COMPOSITE 2 IN connector of
the additional display.
COMPOSITE-1
AUDIO
IN
L
R
IN
COMPOSITE-2
IN
COMPOSITE-1
AUDIO
IN
L
R
IN
OUT
COMPOSITE-2
IN
OUT
AUDIO
OUT
L
R
or

19
MAKING CONNECTIONS
Using S- V ideo Cab les
Connect one end of an S-Video cable to the S-VIDEO connector of the LCD display and the other end to the
S-VIDEO connector of your device.
For audio input, connect an RCA cable to the AUDIO IN connectors of the LCD display and the audio out
connector of your device.
AUDIO
IN
L
R
S-VIDEO
Using H DMI Cab les
Connect one end of an HDMI cable to the HDMI connector of the LCD display and the other end to the HDMI
connector of your device.
HDMI

20
MAKING CONNECTIONS
Using DisplayPort Cab les
Connect one end of a DisplayPort cable to the DisplayPort connector of the LCD display and the other end to
the DisplayPort connector of your device.
DisplayPort