AG Neovo X-15E User manual

X-15E, X-17E & X-19E LED-Backlit Display
User Manualdisplays.agneovo.com

TABLE OF CONTENTS
2
Saf ety I nf ormation
Federal Communications Commission (FCC) Notice (U.S. Only)............................................................4
W EEE.......................................................................................................................................................4
P recautions
Notice.......................................................................................................................................................5
Cautions W hen Setting Up.......................................................................................................................5
Cautions W hen Using...............................................................................................................................6
Cleaning and Maintenance.......................................................................................................................6
Notice for the LCD Display.......................................................................................................................7
Ch ap ter 1 : P roduct D escrip tion
1.1 Package Contents..............................................................................................................................8
1.2 W all Mounting Installation Preparation...............................................................................................9
1.2.1 W all Mounting..........................................................................................................................9
1.2.2 Removing the Base Stand.......................................................................................................9
1.3 LCD Display Overview .......................................................................................................................10
1.3 .1 Front View and K eypad Buttons..............................................................................................10
1.3 .2 Rear View................................................................................................................................11
Ch ap ter 2 : M ak ing Connections
2.1 Connecting the Power........................................................................................................................12
2.2 Connecting Input Source Signals.......................................................................................................13
2.2.1 Connecting a Computer ..........................................................................................................13
Using VGA Cables ......................................................................................................................... 13
Using DVI Cables...........................................................................................................................13
Using DisplayPort Cables ..............................................................................................................14
Connecting an Audio Device..........................................................................................................14
2.2.2 Connecting a Video Device.....................................................................................................15
Using HDMI Cables........................................................................................................................15
Ch ap ter 3 : Using th e L CD D isp lay
3 .1 Turning on the Power.........................................................................................................................16
3 .2 Selecting the Input Source Signal......................................................................................................16
3 .3 Adjusting the Volume..........................................................................................................................17
3 .4 Locking the OSD Menu......................................................................................................................17
3 .5 Using Picture-in-Picture (PIP) ............................................................................................................18
3 .5.1 PIP Options.............................................................................................................................18
3 .5.2 PIP Swap.................................................................................................................................19
3 .6 Using Auto Adjustment Function ........................................................................................................19
Ch ap ter 4: On Screen D isp lay M enu
4 .1 Using the OSD Menu .........................................................................................................................20
4 .2 OSD Menu Tree .................................................................................................................................22

3
TABLE OF CONTENTS
Ch ap ter 5 : A dj usting th e L CD D isp lay
5.1 BRIGHTNESS....................................................................................................................................25
5.2 COLOUR TEMP..................................................................................................................................27
5.3 IMAGE SETTING...............................................................................................................................28
5.4 ASPECT RATIO..................................................................................................................................3 1
5.5 PIP SETTING.....................................................................................................................................3 2
5.6 ANTI-BURN-IN...................................................................................................................................3 4
5.7 OSD SETTING...................................................................................................................................3 5
5.8 AUDIO SETTING................................................................................................................................3 6
5.9 SY STEM.............................................................................................................................................3 7
5.10 ECO SMART....................................................................................................................................3 9
5.11 INPUT SELECT................................................................................................................................4 0
Ch ap ter 6 : A p p endix
6 .1 W arning Messages.............................................................................................................................4 1
6 .2 Troubleshooting..................................................................................................................................4 2
6 .3 Transporting the LCD Display ............................................................................................................4 4
Chapter 7: Specications
 isplay pecications ........................................................................................................................4 5
7 .2 Display Dimensions............................................................................................................................4 6
7 .2.1 X -15E Dimensions.....................................................................................................................4 6
7 .2.2 X -17 E Dimensions.....................................................................................................................4 6
7 .2.3 X -19 E Dimensions.....................................................................................................................4 7

SAFETY INFORMATION
4
WEEE
Information for users applicable in European Union countries.
The symbol on the product or its packaging signies that this product has to be
disposed separately from ordinary household wastes at its end of life. Please kindly
be aware that this is your responsibility to dispose electronic equipment at recycling
centers so as to help conserve natural resources. Each country in the European Union
should have its collection centers for electrical and electronic equipment recycling.
For information about your recycling drop off area, please contact your local related
electrical and electronic equipment waste management authority or the retailer where
you bought the product.
Federal Communications Commission (FCC) Notice (U.S. Only)
X-19E
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Use only an RF shielded cable that was supplied with the display when connecting this display to a computer
device.
To prevent damage which may result in re or shock hazard, do not expose this appliance to rain or excessive
moisture.
THIS CLASS B DIGITALAPPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-
CAUSING EQUIPMENT REGULATIONS.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

5
PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Symb ols used in th is manual
This icon indicates the existence of a potential haza rd that could result in personal injury
or damage to the product.
This icon indicates important operating and servicing information.
Notice
• Read this User Manual carefully before using the LCD display and keep it for future reference.
•The product specifications and other information provided in this ser anual are for reference only ll
information is subject to change without notice. Updated content can be downloaded from our web site at
disp lays.ag neov o.com.
• To protect your rights as a consumer, do not remove any stickers from the LCD display. Doing so may
affect the determination of the warranty period.
Cautions Wh en Setting Up
Do not place the LCD display near heat sources, such as a heater, exhaust vent, or in direct
sunlight.
Do not cover or block the ventilation holes in the housing.
Place the LCD display on a stable area. Do not place the LCD display where it may subject
to vibration or shock.
Place the LCD display in a well-ventilated area.
Do not place the LCD display outdoors.
Do not place the LCD display in a dusty or humid environment.
Do not spill liquid or insert sharp objects into the LCD display through the ventilation holes.
oing so may cause accidental re, electric shock or damage the C display

6
PRECAUTIONS
Cautions Wh en Using
Use only the power cord supplied with the LCD
display.
The power outlet should be installed near the LCD
display and be easily accessible.
If an extension cord is used with the LCD display,
ensure that the total current consumption plugged
into the power outlet does not exceed the ampere
rating.
Do not allow anything to rest on the power cord. Do
not place the LCD display where the power cord
may be stepped on.
f the C display will not be used for an indenite
period of time, unplug the power cord from the
power outlet.
To disconnect the power cord, grasp and pull by the
plug head. Do not tug on the cord; doing so may
cause re or electric shock
Do not unplug or touch the power cord with wet
hands.
Cleaning and M aintenance
The LCD display comes with NeoVTM Optical
Glass. Use a soft cloth lightly moistened with a mild
detergent solution to clean the glass surface and the
housing.
Do not rub or tap the surface of the glass with sharp
or abrasive items such as a pen or screwdriver. This
may result in scratching the surface of the glass.
Do not attempt to service the LCD display yourself,
refer to ualied service personnel pening or
removing the covers may expose you to dangerous
voltage or other risks.
Warning :
Unplug the power cord
from the power outlet and
refer to ualied service
personnel under the following
conditions:
W hen the power cord is
damaged.
If the LCD display has been
dropped or the housing has
been damaged.
If the LCD display emits smoke
or a distinct odor.
Warning :
Ceiling mount or mount
on any other horizo ntal
surface overhead are not
advisable.
Installation in contravention of
the instructions may result in
undesirable consequences,
particularly hurting people and
damaging property. Users who
have already mounted the
display on the ceiling or any
other horizo ntal surface overhead
are strongly advised to contact
 eovo for consultations and
solutions to help ensure a most
pleasurable and fullling display
experience.

7
PRECAUTIONS
Notice f or th e L CD D isp lay
In order to maintain the stable luminous performance, it is recommended to use low brightness setting.
Due to the lifespan of the lamp, it is normal that the brightness quality of the LCD display may decrease
with time.
W hen static images are displayed for long periods of time, the image may cause an imprint on the LCD
display. This is called image retention or burn-in.
To prevent image retention, do any of the following:
• Set the LCD display to turn off after a few minutes of being idle.
• Use a screen saver that has moving graphics or a blank white image.
• Switch desktop backgrounds regularly.
• dust the C display to low brightness settings
• Turn off the LCD display when the system is not in use.
Things to do when the LCD display shows image retention:
• Turn off the LCD display for extended periods of time. It can be several hours or several days.
• Use a screen saver and run it for extended periods of time.
• Use a black and white image and run it for extended periods of time.
W hen the LCD display is moved from one room to another or there is a sudden change from low to high
ambient temperature, dew condensation may form on or inside the glass surface. W hen this happens, do
not turn on the LCD display until the dew disappears.
Due to humid weather conditions, it is normal for mist to form inside the glass surface of the LCD display.
The mist will disappear after a few days or as soon as the weather stabilize s.
There are millions of micro transistors inside the LCD display. It is normal for a few transistors to be
damaged and to produce spots. This is acceptable and is not considered a failure.

CHAPTER 1: PRODUCT DESCRIPTION
8
1 .1 P ack ag e Contents
W hen unpacking, check if the following items are included in
the package. If any of them is missing or damaged, contact your
dealer.
Q uick Start G uide
P ow er cord
Note:
The pictures are for reference
only. Actual items may vary
upon shipment.
V G A cab le
P ow er adap ter
L CD D isp lay
A udio cab le
Note:
Must use only the supplied power
adapter:
Lite-on Technology Corporation
Model no.: PA-10 4 1-8 1
Rating: 12V/3 .3 3 A
DELTA ELECTRONICS, INC.
Model no.: ADP-4 0 DD B
Rating: 12V/3 .3 3 A
Ch ap ter 1 : P roduct D escrip tion
X-15E, X-17E & X-19E
www.agneovo.com
X-15E/X-17E/X-19E_Quick Guide_V010
Quick Start Guide
X-15E, X-17E & X-19E LED-Backlit Display
Warranty card

9
PRODUCT DESCRIPTION
1 .2 Wall M ounting I nstallation P rep aration
1 .2 .1 Wall M ounting
1R emov e th e b ase stand.
See procedures below.
2Wall mount th e L CD disp lay.
Screw the mounting bracket to the VESA holes at
the rear of the LCD display.
1 .2 .2 R emov ing th e B ase Stand
1 Carefully place the
product screen side
down on a cushioned
surface that will
protect product and
screen from damage.
2 Remove the screws
securing the base
stand from the LCD
display.
3 Detach the base
stand.
4 Lock screws back.
Note:
Take measures to prevent the
LCD display from falling down
and lessen possible injury and
damage to the display in case of
earthquakes or other disasters.
Use only the 7 5 x 7 5 mm and
10 0 x 10 0 mm wall mount kit
recommended by AG Neovo.
Secure the LCD display on a
solid wall strong enough to bear
its weight.
Note:
To protect the glass panel, place a
towel or soft cloth before laying the
LCD display down.
Warning :
Ceiling mount or mount
on any other horizo ntal
surface overhead are not
advisable.
Installation in contravention of
the instructions may result in
undesirable consequences,
particularly hurting people and
damaging property. Users who
have already mounted the
display on the ceiling or any
other horizo ntal surface overhead
are strongly advised to contact
AG Neovo for consultations and
solutions to help ensure a most
pleasurable and fullling display
experience.
100 mm
75 mm
100 mm 75
mm

1 0
PRODUCT DESCRIPTION
1 .3 L CD D isp lay Ov erv iew
1 .3 .1 Front V iew and K eyp ad B uttons
6
4
7
5
9
8
2
3
1
D isp lay screen
The LCD display screen is protected by
NeoVTM Optical Glass.
Green - Power on
Amber - Standby mode
Off - Power off
SOUR CE
• Press repeatedly to select the input signal
source.
UP
• Press repeatedly to select PIP option.
• During OSD menu selection, press to move
up a menu or submenu.
M ENU
• Press to display the OSD menu.
• Press again to hide the OSD menu.
D OWN
• Press to swap the PIP main and sub picture.
• During OSD menu selection, press to move
up a menu or submenu.
L EFT
• Press to decrease the volume.
• During OSD menu selection, press to adjust the
settings.
R I G H T
• Press to increase the volume.
• During OSD menu selection, press to select an
option and adjust the settings.
A UT O
• For VGA input signal source, press to perform
auto adjustment.
• During OSD menu selection, press to close the
OSD menu or exit a submenu.
P OWER / L ED indicator
• Press to turn the power on or off.
1
7
6
5
4
3
2
8
9
EcoSmart sensor: Detect ambient lighting
conditions and automatically adjust the
brightness levels. Refer to page 4 0 “ ECO
SMART” for more information.
10
10

1 1
PRODUCT DESCRIPTION
1 .3 .2 R ear V iew
AUDIO INDVIDC IN HDMIDisplayPortVGA
1 2 3 5 64
D C p ow er inp ut
Use to connect the power adapter.
D isp layP ort connector
Use to connect a PC or video device using a
displayport cable for digital input signal.
D V I connector
Use to connect a PC using DVI cable
for digital input signal.
14
2
3H D M I connector
Use to connect an input device using
HDMI cable for digital input signal. A udio p ort
Use to connect an audio cable for the PC’s
audio input.
6
V G A connector
Use to connect a PC using a VGA cable for
analogue input signal.
5

CHAPTER 2: MAKING CONNECTIONS
1 2
2 .1 Connecting th e P ow er
1Connect the power cord to the power adapter.
2Connect the power adapter to the DC power input at the rear of the LCD display.
3Connect the power cord plug to a power outlet or a power supply.
DC IN
Caution:
Make sure that the LCD display is
not connected to the power outlet
before making any connections.
Connecting cables while the power
is ON may cause electric shock or
personal injury.
Caution:
W hen unplugging the power cord,
hold the power cord by the plug
head. Never pull by the cord.

1 3
MAKING CONNECTIONS
2 .2 Connecting I np ut Source Sig nals
2 .2 .1 Connecting a Comp uter
Using V G A Cab les
Connect one end of a D-sub cable to the VGA connector of the LCD display and the other end to the D-sub
connector of the computer.
VGA
Using D V I Cab les
Connect one end of a DVI cable to the DVI connector of the LCD display and the other end to the DVI
connector of the computer.
DVI

1 4
MAKING CONNECTIONS
Using D isp layP ort Cab les
Connect one end of a DisplayPort cable to the DisplayPort connector of the LCD display and the other end to
the DisplayPort connector of the computer.
DisplayPort
Connecting an A udio D ev ice
Connect one end of an audio cable to the audio port at the rear of the LCD display and the other end to the
audio out port of the computer.
AUDIO IN

1 5
MAKING CONNECTIONS
2 .2 .2 Connecting a V ideo D ev ice
Using H D M I Cab les
Connect one end of an HDMI cable to the HDMI connector of the LCD display and the other end to the HDMI
connector of your device.
HDMI

CHAPTER 3: USING THE LCD DISPLAY
1 6
3 .1 T urning on th e P ow er
Note:
The LCD display still consumes
power as long as the power
cord is connected to the power
outlet. Disconnect the power
cord to completely cut off
power.
Notes:
This function works only if
SOUR CE D ET ECT is set to
M A NUA L . Refer to page 3 8 .
After selecting an input source
signal, the input source signal
message appears on the
screen briey
For example, HDMI is selected
the following message is
displayed.
HDMI INPUT
If the selected input source
signal is not connected to the
LCD display or is turned off, the
no signal message is displayed
on the screen.
NO
SIGNAL
If the resolution or the graphics
card of the connected computer
is set too high, the input out of
range message is displayed.
INPUT SIGNAL
OUT OF RANGE
1Touch the button to call out the input
source menu.
VGA
DVI
HDMI
DP
2Touch the por qbutton to highlight
an input source.
3Touch the ubutton to select the input
source.
P OWER button /
L ED indicator
1Plug the power cord to a power outlet
or power supply.
2Touch the P OWER button to turn the
LCD display on.
The LED indicator turns GREEN.
W hen the LCD display is turned on,
touch the POW ER button to turn off the
LCD display.
The LED indicator turns off.
3 .2 Selecting th e I np ut Source Sig nal
SOUR CE button

1 7
USING THE LCD DISPLAY
3 .3 A dj usting th e V olume
3 .4 L ock ing th e OSD M enu
Lock the OSD menu to protect the LCD display from unauthorised users or from accidentally pressing the
keypad.
To lock the OSD, press and hold the keypad buttons listed below for at least 5 seconds or until the
OSD
LOCK OUT message appears.
W hen the OSD is locked, all keypad buttons are inactivated.
T yp e of OSD L ock L ock Op eration Unlock Op eration
Lock all buttons Touch and hold the u, p, and q
buttons for 5 seconds.
Touch and hold the u, p, and q
buttons for 5 seconds or until the OSD
menu appears.
Lock all buttons except
the P OWER button. Touch and hold the t, p, and q
buttons for 5 seconds.
Touch and hold the t, p, and q
buttons for 5 seconds or until the OSD
menu appears.
V OL UM E buttons
A dj usting th e V olume
1Touch either the or buttons to call out the volume bar.
2Touch the button to increase volume.
Touch the button to decrease volume.
To mute the audio, set the volume to 0 .

1 8
USING THE LCD DISPLAY
3 .5 Using P icture- in- P icture (P I P )
The Picture-in-Picture (PIP) feature allows viewing of more than one input source signal on the LCD display.
3 .5 .1 P I P Op tions
Touch the pbutton repeatedly to enable and scroll among the PIP options. Options are as follows:
• PIP On: The sub source signal is displayed within the main source signal.
• PBP (Picture-by-Picture): The main source and the sub source signals are displayed side by side with
equal display size .
• PIP Off: PIP function is disabled, only the main source signal is displayed.
Note:
The main source and sub
source signals can be set in
PIP Setting, see page 3 3 .
Some input source signal
combinations do not support
PIP. See PIP Compatibility
table on page 3 4 .
PIP On
PBP
PIP Off

1 9
USING THE LCD DISPLAY
3 .5 .2 P I P Sw ap
The main and the sub source signals set in PIP Setting can be easily
swapped using the keypad.
Main source
Sub source
Touch the qbutton to swap the main source and the sub source
signals. See illustration below.
Main source
Sub source
3 .6 Using A uto A dj ustment Function
Auto Adjustment function automatically tunes the LCD display to its
optimal setting, including horizo ntal position, vertical position, clock,
and phase.
Touch the button to perform auto adjustment.
The message auto adjusting is displayed on the screen.
AUTO
ADJUSTING
During auto adjustment, the screen will slightly shake for a few
seconds.
W hen the message disappears, auto adjustment is completed.
Note:
PIP Swap can only be executed
if PIP is enabled, see page 3 4 .
Note:
Auto Adjustment function is
available only during VGA input
signals.
It is recommended to use the
auto adjustment function when
using the LCD display for the
rst time or after a resolution or
frequency change.

CHAPTER 4: ON SCREEN DISPLAY MENU
2 0
4.1 Using th e OSD M enu
Op eration
1Display the main menu screen.
1920x1080 60Hz
BRIGHTNESS
COLOUR TEMP.
IMAGE SETTING
ASPECT RATIO
PIP SETTING
ANTI-BURN-IN
OSD SETTING
AUDIO SETTING
SYSTEM
ECO SMART
INPUT SELECT
LANGUAGE
INFORMATION
EXITENTER SELECT
BRIGHTNESS 50
BLACK LEVEL 50
BACKLIGHT50
CONTRAST50
Touch .
2Select the menu.
1920x1080 60Hz
BRIGHTNESS
COLOUR TEMP.
IMAGE SETTING
ASPECT RATIO
PIP SETTING
ANTI-BURN-IN
OSD SETTING
AUDIO SETTING
SYSTEM
ECO SMART
INPUT SELECT
LANGUAGE
INFORMATION
EXITENTER SELECT
BRIGHTNESS 50
BLACK LEVEL 50
BACKLIGHT50
CONTRAST50
1Touch the por qbutton.
2 Touch the ubutton to enter the
submenu.
Navigation W indow