Agilent Technologies 4395A User manual

○
CCopyright 2008 Agilent Technologies
Agilent 4395A Network/Spectrum/Impedance Analyzer Operation Manual
Manual Change
Agilent Part No. N/A
Feb 2008
Change 1
Change the value of Return loss to the following.
Return loss
frequency ＜100 MHz…………………………………………………………………>12 dB (SPC)
frequency ≧100 MHz…………………………………………………………………> 7 dB (SPC)
Change 2
Change the specification of LAccuracy (Page 11-19) to the following.
Accuracy D ≦0.2 0.2 < D
LaLaLa(1 + D)

○
CCopyright 2008 Agilent Technologies
マニュアル チェンジ
変更 １
Return Loss の値を以下に変更してください。
Return loss
frequency ＜100 MHz…………………………………………………………………>12 dB (SPC)
frequency ≧100 MHz…………………………………………………………………> 7 dB (SPC)
変更 2
L Accuracy の仕様（ページ 11-19）を以下に変更して下さい。
Accuracy D ≦0.2 0.2 < D
LaLaLa(1 + D)

Agilent 4395A Network/Spectrum/Impedance Analyzer Operation Manual
Manual Change
Agilent Part No. N/A
May 2007
Change 1
Regarding the Data Processing of Impedance Analyzer Mode, refer to the 4396B Operating Hand book (Page
5-6 to 5-9), or the 4396B Function reference. You can also download the 4396B Manual with the following
process.
1. Open the Agilent Technologies Website.
http://www.agilent.com/
2. In the search box, enter 4396B, and then open the page of 4396B Network/Spectrum Impedance Analyzer.
3. Click the manuals in the Technical Support of 4396B RF Network/Spectrum/Impedance Analyzer.
4. Download the manual
○
CCopyright 2007 Agilent Technologies

マニュアル チェンジ
変更 １
インピーダンス･アナライザ・モードでの内部データ処理については、4396B オペレーティング・ハンドブ
ック（5-6 から 5-9 ページ）または、4396B の機能解説書を参照して下さい。
また、4396B のマニュアルは以下の手順でダウンロードする事ができます。
1. アジレント・テクノロジーのホームページを開きます。
http://www.agilent.com/
2. 検索の欄に“4396B”を入力し、4396B ネットワーク/スペクトラム/インピーダンスアナライザのページ
を開きます。
3. 4396B RF ネットワーク/スペクトラム/インピーダンスアナライザの、テクニカルサポート/イベントか
らマニュアルをクリックします。
4. マニュアルをダウンロードします。
○
CCopyright 2007 Agilent Technologies

○
CCopyright 2007 Agilent Technologies
Agilent 4395A Network/Spectrum/Impedance Analyzer Operation Manual
Manual Change
Agilent Part No. N/A
January 2007
Change 1
Change the equations for the noise level measurement (page 8-35) to the following.
Converting to a Different Equivalent Noise Bandwidth
1. Calculate the conversion factor using the following equations with displayed units:
Unit Use
dBm/Hz K=10logBW
dBV/
√ Hz 、 dBμV/ √ Hz K=10logBW
W/Hz K=BW
V/
√ Hz K= √ BW
Where, BW is the target equivalent noise bandwidth.
Change 2
Change options 1CN, 1CM and 1CP in the package contents of the 4395A(page 2-3) to the following.
Description Agilent Part Number Quantity
Option 1CN Handle Kit Handle Kit 5063-9229 1
Option 1CM Rack Mount Kit
Rack Mount Kit 5063-9216 1
Option 1CP Rack Mount & Handle Kit
Rack Mount & Handle Kit 5063-9223 1

○
CCopyright 2007 Agilent Technologies
マニュアル チェンジ
変更１

ノイズ・レベル測定（ページ 8‑36）の計算式を以下に変更して下さい。

等価ノイズ・バンド幅の変換
1. 表示単位にあわせて、以下の式から変換係数
K を計算します。
表示単位式
dBm/Hz    K=10logBW
dBV/√Hz、dBμV/√Hz  K=10logBW
W/Hz    K=BW
V/√Hz    K=√BW

ここで、
BW は変換する等価ノイズ・バンド幅です。

変更2

4395A の梱包内容（ページ 2‑3）のオプション 1CN、1CM、1CP を以下に変更して下さい。
説明 Agilent パーツ番号 数量
オプション 1CN ハンドル・キット
ハンドル・キット 5063‑9229 1
オプション 1CM ラック・マウント・キット
ラック・マウント・キット 5063‑9216 1
オプション 1CP ラック・マウント＆ハンドル・キット
ラック・マウント＆ハンドル・キット 5063‑9223 1




Manual Change
Agilent Part No. N/A
August 2004
PrintedinMalaysia
Change
Change the company name from (YOKOGAWA-) HEWLETT-PACKARD, LTD., or its abbreviation HP
(YHP) to Agilent Technologies or Agilent.
This document may contain references to HP (YHP) or (Yokogawa-) Hewlett-Packard. Please note that
Hewlett-Packard’s former test and measurement, semiconductor products and chemical analysis businesses
are now part of Agilent Technologies. To reduce potential confusion, the only change to product numbers
and names has been in the company name prefix: where a product number/name was HP XXXX the current
name/number is now Agilent XXXX. For example, model number HP4294A is now model number Agilent
4294A.
マニュアル・チェンジ
マニュアル・チェンジマニュアル・チェンジ
マニュアル・チェンジ
変更
変更変更
変更
本文中の「HP（YHP）」、または「(横河)ヒューレット・パッカード株式会社」という語句を、「Agilent」、
または「アジレント・テクノロジー株式会社」と変更してください。
ヒューレット・パッカード社の電子計測、半導体製品、化学分析ビジネス部門は分離独立し、アジ
レント・テクノロジー社となりました。
社名変更に伴うお客様の混乱を避けるため、製品番号の接頭部のみ変更しております。
（例: 旧製品名 HP 4294A は、現在 Agilent 4294A として販売いたしております。）
© Copyright 2004 Agilent Technologies

Safety Summary
When you notice any of the unusual conditions listed below, immediately
terminate operation and disconnect the power cable.
Contact your local Agilent Technologies sales representative or
authorized service company for repair of the instrument. If you continue
to operate without repairing the instrument, there is a potential fire or
shock hazard for the operator.
nInstrument operates abnormally.
nInstrument emits abnormal noise, smell, smoke or a spark-like light
during the operation.
nInstrument generates high temperature or electrical shock during
operation.
nPower cable, plug, or receptacle on instrument is damaged.
nForeign substance or liquid has fallen into the instrument.

Caution
Do not exceed the operating input power, voltage, and current
level and signal type appropriate for the instrument being used, refer to
your instrument's Operation Manual.
Electrostatic discharge(ESD) can damage the highly sensitive
microcircuits in your instrument. ESD damage is most likely to occur as
the test fixtures are being connected or disconnected. Protect them from
ESD damage by wearing a grounding strap that provides a high
resistance path to ground. Alternatively, ground yourself to discharge any
static charge built-up by touching the outer shell of any grounded
instrument chassis before touching the test port connectors.
4395A

Agilent 4395A Network/Spectrum/Impedance Analyzer
Operation Manual
SERIAL NUMBERS
This manual applies directly to instruments which have
the serial number prex JP1KE and MY411.
F
or additional important information about serial numbers
,
read \Serial Number" in Appendix Dof this Manual.
Agilent Part No. 04395-90040
Printed in JAPAN May 2003
Sixth Edition

Notice
The information contained in this document is subject to change without notice
.
This document contains proprietary information that is protected by copyright. All rights are
reserved. No part of this document may be photocopied, reproduced, or translated to another
language without the prior written consent of the Agilent T
echnologies.
Agilent T
echnologies Japan, Ltd.
Component T
est PGU-Kobe
1-3-2, Murotani, Nishi-ku, Kobe-shi,
Hyogo
,651-2241 Japan
c
 Copyright 1997, 1998, 2000, 2001, 2002, 2003 Agilent Technologies Japan, Ltd.

Manual Printing History
The manual printing date and part number indicate its current edition. The printing date
changes when anew edition is printed. (Minor corrections and updates that are incorporated
at reprint do not cause the date to change.) The manual part number changes when extensive
technical changes are incorporated.
September 1997
::::
::
::
::
:::::::::::::::::::::
::
::
:::
First Edition (part number: 04395-90000)
September 1998
::::
::
::
::
:::::::::::::::::::::::
::
Second Edition (part number: 04395-90010)
March 2000
:::::: ::::
::::::::::::::::::::: :: :: :::::::
Third Edition (part number: 04395-90010)
July 2001
::::::::
::
::::::::::::::::::::: :: :::::::::
F
ourth Edition (part number: 04395-90020)
December 2002
::
:::: :::::::::::::::::::::
::
::
:::::::
Fifth Edition (part number: 04395-90030)
May 2003
::
:::: :::::::::::::::::::::
::
::
:::::::::::::
Sixth Edition (part number: 04395-90040)
iii

Certication
Agilent T
echnologies certies that this product met its published specications at the time
of shipment from the factory. Agilent T
echnologies further certies that its calibration
measurements are traceable to the United States National Institute of Standards and
T
echnology
,to the extent allowed by the Institution's calibration facility
,orto the calibration
facilities of other International Standards Organization members.
W
arranty
This Agilent T
echnologies instrument product is warranted against defects in material and
workmanship for aperiod of one year from the date of shipment, except that in the case of
certain components listed in
General Information
of this manual, the warranty shall be for the
specied period. During the warranty period, Agilent Technologies will, at its option, either
repair or replace products that prove to be defective
.
F
or warranty service or repair
,this product must be returned to aservice facility designated by
Agilent Technologies
.Buyer
shall prepay shipping charges to Agilent T
echnologies and Agilent
T
echnologies shall pay shipping charges to return the product to Buyer
.However
,Buyer shall
pay all shipping charges
,duties
,and taxes for products returned to Agilent T
echnologies from
another country
.
Agilent T
echnologies warrants that its software and rmware designated by Agilent
T
echnologies for use with an instrument will execute its programming instruction when
property installed on that instrument. Agilent T
echnologies does not warrant that the operation
of the instrument, or software
,or rmware will be uninterrupted or error free.
Limitation Of W
arranty
The foregoing warranty shall not apply to defects resulting from improper or inadequate
maintenance by Buyer
,Buyer-supplied software or interfacing, unauthorized modication or
misuse
,operation outside the environmental specications for the product, or improper site
preparation or maintenance
.
No other warranty is expressed or implied. A
gilent T
echnologies specically disclaims the
implied warranties of merchantability and tness for a particular purpose
.
iv