AGPtek HTD8208C User manual

User Manual
Infrared Ear Thermometer
Model: HTD8208C
Please read this manual before operating this device.
Important safety information inside.
Please contact us via [e-mail],when
anything comes to your mind.

Contents
Thank you for purchase our products. Please read this
manual before you use it.
1. Safety Information.......................................................1
2. Advantages................................................................... 2
3. Description................................................................... 3
4. Specifications............................................................... 4
5. Measuring..................................................................... 4
6. Change Battery.............................................................6
7. Troubleshooting.......................................................... 7
8. Maintenance and Cleaning..........................................9

1. Safety Information
1) This device is only used for monitoring human
body’s temperature Such as baby’s fever, women
ovulatory period and so on. It is limit to use in hospital,
community health service centers, kindergartens,
family etc.
2) This device is not waterproof; keep the device away
from water and other liquid.
3) Keep this device away from direct sunlight, keep it
in clean and dry place where the temperature is
5-40℃(41-104℉) and the humidity less than 85%.
4) Don’t touch the Sensor by fingers, which is the most
sensitive part of the device.
5) In order to make sure the correct measuring results,
please clean the earwax and other things in the ear
canal before measuring.
6) Some people can’t measure correctly for their oily
ear canal or other factors.
7) Don’t drop, open, repair and revise the device.
8) Keep this device away from large electromagnetic
fields such as found with cordless or cell phones.
9) When problems occur with the device, please
contact the retailer, don’t repair it by yourself.
10) Dispose the battery according to local laws.
11) Take out of the battery to avoid battery leakage if
you don’t use this device for a long time.
1

12) Don’t mix the new battery and old battery to avoid
damages to this device.
Alarms:
Keep this device out of the reach of children.
Don’t throw battery into fire.
Measurements made with this device can’t replace
a physical examination by a doctor.
2. Advantages
Fast and accurate: 2 seconds measuring time and
the accuracy can be up to ±0.2℃(0.3℉).
Easy to use: Operate with one button.
Three-color backlight(color alarm):
Sound alarm.
Without Ear cover.
10 memories.
Green backlight Normal 34-37.3℃(93.2-99.1℉)
Yellow backlight Slight
Fever
37.4-38℃(99.3-100.4℉)
Red backlight High
Fever
38.1-42.9℃
(100.6-109.2℉)
2

3. Description
Configuration:
1. Sensor
2. LCD display
3. On/Memory button
4. Battery Cover
5. ABS Shell
6. Measuring button
LCD Indicator:
1. Digital Readout
2. Cry Indicator-Fever
3. Smile Indicator-Normal
4. Measuring Indicator
5. Ear temperature Indicator
6. Unit (℃/℉)
7. Memories Indicator
8. Memories Number
9. Low battery Indicator
3

4. Specifications
Weight 60g (Without Battery)
Power DC 3V
Install battery AAA size battery*2
Dimension 160*36*45mm(L*W*H)
Measuring
Accuracy
34.0-34.9℃: ±0.3℃(93.2-94.8℉:
±0.5℉)
35.0-42.0℃: ±0.2℃(95-107.6℉:
±0.3℉)
42.1-42.9℃: ±0.3℃(107.8-109.2℉:
±0.5℉)
Auto shut off ≤ 30 seconds
5. Measuring
Notes before measuring:
The correct measuring is very important, please
kindly pay attention to the notes bellow before
measuring to avoid wrong measuring.
1) If the people come from a different ambient
temperature, please wait more than 5 minutes before
measuring.
2) The ambient temperature should be stable, don’t
measure the body temperature in front of fans, air
outlets of the air-conditioner etc. where the airflow is
floating.
4

3) To obtain stable and reliable data, you should keep
the device for 30 minutes to balance its own
temperature before measuring when the ambient
temperature changes greatly.
4) Suggest measure the body temperature three times
and be subject to the highest value.
5) Please wait at least 30 seconds after 5 continuous
measuring.
Measuring Operation:
1) Press On/Memory button to turn on the
thermometer, LCD screen will display all the digits
and signals. And the thermometer will begin to
self-check.
2) After self-checking, the LCD screen will display
the last memory.
3) After display the last memory, the Unit begins to
flash, the thermometer is ready for measuring.
4) If the baby is more than 1 year old, please pull its
ear up slightly; if no, please pull its ear back slightly.
5) Gently apply the measurement probe to the ear,
press the measuring button, after a short beep sound,
pull out of the thermometer and the measuring result
will show on the LCD screen.
5

NOTE:
1) When the thermometer is ON, short press the
On/Memory button to check the memorized data.
2) The bigger memorized number, the more previous
data you have saved.
3) If there is not memory data, the LCD screen will
display”----“.
4) The device can only story 10 memories; the
previous data will be deleted automatically when the
new data is memorized.
Clear memory
When the thermometer is ON, keep pressing
on/Memory button until the LCD screen display “CLR”,
and there will be a long beep sound, then all the
memories be cleared.
Change Units
When the thermometer is ON, keep pressing the
ON/Memory button and measuring button at the same
time, the Unit will be changed.
6. Change Battery
When the battery is low, please change new batteries.
1) Please make sure the correct positioning, a mistake
with this will cause damage to the device and
compromise the guarantee of the device.
6

2) Never use rechargeable batteries use only batteries
for single usage.
3) Don’t use the leaked battery and musty battery.
4) Don‘t keep the battery together with the keys, coins
and other metal items, which may cause short circuit.
7. Troubleshooting
Display Possible reasons Maintenance
Suggestions
The temperature
is higher
than42.9℃
(109.2℉).
Make sure the right
measuring object.
The temperature
is lower
than34.0℃(93.2
℉).
Make sure the right
measuring object.
Wrong operating
ambient
temperature.
Make sure the device is
under
5-40℃(41.0-104.0℉)op
erating conditions.
7

System Mistake.
System mistake
happens, the device will
turn off after show all
the digits and signals.
Low battery. Please change new
battery.
The operating
ambient
temperature is
not stable.
Keep the device in stable
operating ambient
temperature more than
30 minutes before
measuring.
Blank display.
Make sure the correct
battery’s installation and
its positive and negative
charges.
8

8. Maintenance and Cleaning
1) The Sensor is the most important and fragile part of
the device, please take great care of it.
2) Clean the thermometer with cotton swabs soaked
with 70%-75% alcohol. Don’t submerge the
thermometer or any other liquid.
3) Clean the sensor with cotton swabs soaked with a
little of alcohol. Point the sensor down to prevent the
alcohol from penetrating inside.
4) Protect the product from direct sunlight, humidity,
dampness, dust and other contaminants.
5) Don’t clean the device with corrosive detergent,
diluents, gas and so on.
6) The LCD display is also sensitive part of the device,
please take great care of it too.
9