
Usage and Maintenance Instructions Ver. 2 08/2012 (2100)
2
INTRODUCTION
Thank you for deciding to purchase the Dycem Non-Slip Mat/Coasters from Aidapt.
Dycem Non-Slip Mat/Coasters are manufactured from the finest materials availa le.
When used correctly they are designed to give many years of relia le, trou le-free
service.
NB. This equipment must be installed by a competent person.
VM 8 Size: 90 mm (3.5") Square (Pack of 4)
VM 0 Diameter: 140 mm (5.5") Round
VM 1 Diameter: 190 mm (7.5") Round
BEFORE USE
Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visi le damage If you see any damage or suspect a fault,
do not use your product, ut contact your supplier for support.
INTENDED USE
Dycem Non-Slip Mats/Coasters are constructed from a thin non-woven fa ric,
which is coated on oth sides with non-slip material. The Dycem Non-Slip
Mats/Coasters are very flexi le, and can easily e cut to size.
This is a general use, multi-purpose product, with various applications such as a
shelf or tray liner.
It is availa le in several sizes and shapes.
Please note: Dycem is not effective when wet. Do not subject to temperatures
over 50 degrees Celsius.
INSTRUCTIONS FOR USE
•The mats/coasters are availa le in various shapes and sizes to fit many
sizes of trays, etc, ut can e cut to size if necessary.
•Using sharp scissors, cut the mat to the required shape and size.
•Position the Dycem Non-Slip material as desired, for example to line a tray
or cover a edside ta le.
•No adhesive is required.