AIGOSTAR 718356204927 User manual

INSTRUCTION MANUAL
LCD TOWER FAN
MODEL: 718356204927
PLEASE READ THE MANUAL CAREFULLY BEFORE OPERATING
YOUR PRODUCT AND RETAIN IT FOR FUTURE USE

IMPORTANT SAFEGUARDS
Read Rules of Safe Operation and Instructions Carefully.
1. The product is intended exclusively for
non-commercial operation as a mobile fan.
2. The product is intended for indoor use only.
3. To reduce the risk of fire or electrical shock, do not
use this fan with any solid state speed control device.
4. If the power cord is damaged, stop using the product
immediately. Do not use if the ON/OFF switch does
not function correctly.
5. This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this
safety feature.
6. Do not leave the fan running unattended.
7. Never insert fingers, pencils, or any other objects
through the fan housing when the tower fan is
running. Unplug the fan when moving it from one
location to another.
8. Disconnect the fan before installing, cleaning or
transporting the fan.
9. Pull the plug out if the fan is not in use, always pull
out the mains plug at the plug and not by the cable.
10. To avoid product tipping over, be sure the fan is on a
stable surface when in operation.
11. Never use the device in a room where there is a
danger of explosion or in the vicinity of flammable
liquids or gases. Do not use the fan near a window,

rain may cause electrical hazard. Never expose the
product to water or other liquids.
12. Ensure that the fan is unplugged and switched off
before removing the grill.
13. This product is not intended to be used by persons
(including children) or who are limited in their
physical, sensory or mantel capacities or who lack
experience and knowledge of the product unless they
are supervised, or have been instructed on how to use
the product, by a person responsible for their safety.
Ensure children are not able to play with the device.
SPECIFICATIONS
Model No.
718356204927
Voltage
120V~
Frequency
60Hz
Rated Power
50W
MAIN DIAGRAM

ASSEMBLY INSTRUCTIONS
Tools required
Phillips screwdriver and 4 pieces of screws
Product assembly
Do not operate the tower fan without the base
assemblies attached to the bottom of the unit. Otherwise
it may cause a hazard.
1. Turn the tower fan upside down for easily assemble.
2. Align two separate bases together and use 4 screws to
attach two bases tightly.
3.Put the power cord in the slot of the base.
4.Slide the base onto the fan body and rotate the plastic
nut clockwise to secure the base.
5. Turn the tower fan upside in correct position for use.

OPERATION INSTRUCTIONS
All the features of this fan can be controlled from the
control panel and remote control.
To Turn the Fan On/Off:
Gently press the "ON/OFF" button to turn fan on. Press a
second time to turn the fan off.
To Set the Fan Speed:
Gently press the "SPEED" button to cycle between the

LOW, MEDIUM and HIGH settings.
Oscillating Operation:
This fan is designed to oscillate to cool a large space
efficiently. To start oscillation, press the "OSCILLATE"
button. To stop oscillation, press the button a second
time.
To Set the Fan mode:
Gently press the "MODE" button to set "normal" (the
wind is more stable than "nature" and "sleep"); press it
twice to set "nature" mode (the gusts you feel like natural
wind blows outdoor); and three times to set it to
"sleeping" mode (the wind is gentle and most suitable for
sleeping).
To Set Timer Operation:
This fan is equipped with a timer that ranges from
0.5-7.5hours. To set the fan to automatically turn off after
a scheduled amount of time, simply press the "TIMER"

button. The illuminated lights on the control panel of the
fan will display the time you have set. Up to four of the
time indicator lights may be on at the same time to
display the total time (e.g. if the 4h and 2h lights are on, it
indicates a total time of 6 hours.) To cancel timer
operation, press the button until all the time lights go
out.
USER SERVICING INSTRUCTIONS
NOTE:
This product employs overload protection (fuse). A blown
fuse indicates an overload or short-circuit situation. If the
fuse blows, unplug the product from the outlet. Replace
the fuse as below instructions and check the product. If
the replacement fuse blows, a short-circuit may be
present and the product should be discarded or returned
to an authorized service facility for examination and/or
repair.

HOW TO REPLACE THE FUSE
Grasp plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord. Open
fuse covers by sliding it towards blades (see Fig. 4). Then
remove the fuse, pry it out carefully (see Fig. 5). Replace
the new fuse and push the cover back. When you feel it is
hard to be operated, please ask qualified person for help.
WARNING: Risk of fire. Replace fuse only with 5 Amp, 125
Volt fuse. Do not replace attachment plug. Discard
product if the attachment plug is damaged.
CARE AND MAINTENANCE
● Always remove the plug from the outlet and allow the

fan to completely stop before cleaning.
● Do not allow water to drip on or enter into fan housing.
● To clean, use a soft cloth moistened with a mild soap
solution.
● Do not use any of the following as a cleaner: gasoline,
thinner, or benzene.
●In case of malfunction or doubt, do not try to repair the
fan yourself, it may result in a fire hazard or electric
shock.

WARRANTY: 2 YEARS