AIO ZEUS User manual

ZEUS
QUICK-START GUIDE
Getting started
1Cut straps 3Lift box + remove packaging
2Remove all four plastic tabs
Insert power cable in back, switch on 9Unwrap lament and feed through tube
8Press front on button for 1 second
Open door by lifting up and back 6Place turnable 3 pins facing down
5Remove interior packaging
4
7
Remove
test printout
10 Wind excess back onto spool 12 Press park button
11 Press control button
Select a le 18 Lift glass plate then remove printout
17 Select print
Feed lament all the way down 15 Press print to access les
14 Prep plate with thin layer of glue
13
16
Squeeze tabs with
thumb and index
NB: “Box” test le print time:
> 8 mins
A
4
Recommended: start with a test
All manuals and user guides at all-guides.com
all-guides.com

Included Accessories
Filament Scanner Calibration Pattern Scan powder + applicator Spatula (printout remover)
Glue Stick Wi dongle Power supply Turn table
B
Connecting ZEUS to the web
Insert wi dongle Optional:ethernet Select WIFI icon Select your local
wireless network.
Enter password.
C
A. Wi is connected
B. Ethernet is
connected (defaults
to ethernet if
connected)
AB
USB 3Ethernet
2Wi
1
NB: “Box” test le print time:
> 8 mins
When ZEUS is off line
File Transfer Options (refer to manual for details)D
For le transfer via wi or ethernet, enter IP address (A or B) in computer browser to access Pydio. Login: aio Password: aiorobotics
Home Control System menu
Print Scan Copy Fax
ZEUS UI - the basicsE
Online settings
All manuals and user guides at all-guides.com