7
MN-695
Air Lift 1000
spring seat and lower spacers.
If necessary, loosen the clamps and rotate or move to obtain additional clearance.
DUAL AIR LINE ROUTING
assuring that each valve will be protected and accessible with an air hose.
2. Determine and cut an adequate length of air line to reach from the valve location to the
left side air spring.
3. Insert the air line through the spring seat and spacer.
slide the air line clamp forward until it fully covers the barbed section.
off the excess.
lower spacers.
If necessary, loosen the clamps and rotate or move to obtain additional clearance. If you
are installing this kit on a Honda Odyssey see page 6 for instruction on how to install
COMPLETING THE INSTALLATION
/5dish
soap to /5
your air springs.
pressure has dropped more than 5 lbs, retest for leaks.
CAUTION
CAUTION
CAUTION
CAUTION
