Aiwa MI-X150 Retro Plus X User manual

User Manual
MI-X150
Retro Plus X
Aiwa Electronics Int’l Co., Ltd.
Explore more at www.int-aiwa.com

- MI-X150 Speaker
- Type - C Charging Cable
- 3.5mm Aux Cable
- User’s Manual
- Handle
Please refrain from using any damaged components.
Contact your local authorized AIWA distributor/customer service
should you need any assistance.
Unboxing

Model Number: MI-X150 Retro Plus X
BT Version: V5.0
IP Rating: -
Power Output: 2 X 40W
Frequency Response: 125Hz - 16kHz
S/N Ratio: ≥ 60dB
Sensitivity: 60dB + 3dB
Supports: BT, AUX, TF Card, USB, TWS
Supported Profiles: A2DPV 1.2, AVRCPV 1.4, GAVDPV 1.2, AVDTPV 1.2
SPPV 1.2, AVCTPV 1.2
Transmission Distance (Estimated): 10 Meters (No Obstacles)
Battery: 11.1V/ 6000mAH (Li-on 18650)
Playback Time: 5 - 6 Hours (100% Volume)
Playback Time: 13 - 14 Hours (50% Volume)
Charging Time: 8 - 9Hours
DC Input Voltage/Current: Type C, DC 5V/2A
Dimensions: 300*180*180mm
Weight: 3550g
The above are estimated values tested in a practical environment and may
vary upon individual usage habits.
Product Specifications

Power Switch
LED Indicator Light
Charging Indicator Light
Previous Track/ TWS Pairing Button
Play & Pause Button/ Playback Mode Button/ Call Control Button
Next Track/ Enter BT Pairing mode/ Disconnect BT Connection
Treble Tuning Knob
Bass Tuning Knob
Volume Tuning Knob
USB Port
Type – C Charging Port
AUX Port
Battery Indicator Light
Phone Call Indicator Light
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Product Overview

Product Usage Guide
Power ON/OFF:
Flick Power Switch Lever
Music Control:
Play/Pause: Click 5 once (1)
Next Track: Click 6 once (1)
Previous Track: Click 4 once (1)
Volume: Use volume knob to adjust accordingly
Switch in between BT/AUX/USB playback: Press and hold 5.
Bass & Treble Adjustment:
Bass: Use bass tuning knob accordingly
Treble: Use treble tuning knob accordingly
Call Control:
Answer/End incoming call: Click 5 once (1)
Reject incoming call: Press and hold 5.
Playback Sources:
USB Playback : Insert USB into the designated port, playback will commence
automatically.
AUX Playback : Insert AUX cable and connect it to audio source to start.

Connecting the Product
Dis-connecting the Product
Paired device
Pairable devices
AIWA Retro Plus X
AIWA Retro Plus X
ON/OFF ON/OFF
Paired device
Pairable devices
1. Turn on Bluetooth (BT) on your mobile device.
2. Turn on the speaker.
3. Search and connect to “AIWA Retro Plus X” from your mobile device.
MI-X150 Retro Plus X automatically reconnects to the last connected mobile
device.
Press and hold to disconnect “AIWA Retro Plus X” from your mobile
device.
OR
Disconnect ”AIWA Retro Plus X” from your mobile device’s Bluetooth menu.

TWS Function
TWS Operation:
Turn on both speakers (Only compatible with the same model).
Press and hold button 4 on one of the units for three (3)
seconds.
*Notification sound prompt indicated successful TWS connection
between both speakers.
Turn on Bluetooth (BT) on your mobile device.
Search and connect to “AIWA Lunatic” from your mobile device..
Playback should now commence via both speaker units at the
same time.
Press and hold button 4to exit TWS.
1.
2.
3.
4.
5.
6.
7.

Battery & Charging
Charging the speaker:
Connect Type-C charging cable to the speaker and a suitable power source.
Approximate charging time: 8-9 Hours
Please fully charge up the speaker prior to first-time usage.
Troubleshooting
Unable to connect to device:
1. Please ensure the speaker is not connected to other devices
2. Please ensure the speaker is within 10m from the device
No sound is coming out of the speaker:
1. Please ensure your device is connected to the speaker.
2. Please ensure the music volume is at an audible level on both your mobile device and
speaker.

Aiwa Electronics Int’l Co., Ltd.
Explore more at www.int-aiwa.com