Akai CAU-7380 Product information sheet

Short User Manual
(Fi g. 1)
12
3
(Fig.3)
2
13
1
2
3
4
5
6
7
(Fig.2)
02
3
2
2
03
Treble
Press VOL/SEL button (2) twice. You can adjust the treble tone here.
04
Fastening the unit to the factory radio
mounting bracket
1. Select a position where the screw holes of
the bracket and the screw holes of the main
unit become aligned (are fitted), and tighten
the screws at 2 places on each side. Use
either truss screws (5 x 5mm) or flush
surface screws (4 x 5mm).
2. Screw
3. Dashboard or Console
FRONT PANEL LAYOUT
Installation
Precautions
Before finally installing the unit, connect the wiring temporarily and make sure it is all
connected up properly and the unit and the system work properly.
Avoid installing the unit where it would be subject to high temperature, such as
from direct sunlight, or from hot air, form the heater, or where it would be subject
to dust, dirt or excessive vibration.
Use only the parts included with the unit to ensure proper installation. The use of
unauthorized parts can cause malfunctions.
Consult with your nearest dealer if installati on requires the drilling of holes or
other modifications of the vehicle.
Installing the unit
Front Mount
1. Dashboard
2. Holder
After inserting the holder into the dashboard,
select the appropriate tab according to the
thickness of the dashboard material and bend
them inwards to secure the holder in place.(Fig. 1)
3. Screw
Under power off status,short press is power on,
Under power on status,short press is switching mode, long press is power off.
Sound Adjustment
Press SEL button (2) and choose from the options.
Volume
You can adjust the volume of the device with the
VOL(+) and VOL(-) buttons.
Bass
Press VOL/SEL button (2). You can adjust the bass tone here.
Fader
Press SEL button (2) three times. Adjust sound balance
between front and rear speakers
CAU-7380 CAR RADIO
MP3 USB/SD/AUX PLAYER
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
1177
Power/AV Button
Volume/Select
(VOL/SEL) Button
Mute Button
LCD Display
Automatic Memory Storing
Tune Seek, Track Forward
Tune Seek, Track Backward
Play/Pause Button
Intro Button
Repeat Button
Random Button
Previous Button -
Next Button +
AUX IN
USB Plug
SD/MMC slot
Band Selection
Reset Button
Function Selection Button
POWER ON
16
For the detailed user manual please visit the akai-atd.com website.
The user manual can be downloaded in PDF format. To read the file a PDF reader
application is needed.

05 06
07
Mute
Short press MUTE button to mute the device. Press MUTE button again
to turn off the mute function and set back the sound.
Radio Operations
Band Selection
At tuner mode, press BAND button (6) to select the desired band.
Radio Mode
For manual tuning: short press Tune Seek Forward or Tune Seek Backward
button in radio mode and tune seeking will start. At a detected channel the
seeking will automatically stop. You can store the desired channel by long
pressing the number buttons where you would like to store the channel.
Automatic memory storage
Press AMS(MP3) button (9) for several seconds, the radio searches from
the current frequency and checks the signal strength until one cycle
search is finished.
And then 6 strongest stations are stored into the corresponding preset
number button.
USB/SD FLASH MP3 Playing
Press and hold “mode” button to open video/audio files from pendrive.
PLAY / PAUSE
Press button (10) pause function is activated. Music track play time
INDICATOR flashes.
Press it again to resum epalying, press it more than 1 second is TOP
function.
INT
Press button (11): During INTRO ON, INT indicator comes on and begins.
Playing the first 10sec of each song, until the last song is played. It begins
playing the entire track from where INT started.
RPT
Press preset button (12): Flash play mode : REPEAT ON / OFF is activated.
When REPEAT ON, RPT INDICATOR comes on and repeats the current
music track.
RDM
Press preset button (13): During RANDOM ON, RDM INDICATOR is turned
on and the tracks of disc is played in random instead of normal order.
12VDC (12V-15V), negative ground
4x 50 W
10W x 4 channel (4 10% T.H.D.)
4-8 ohm
2.0V (playing: 1KHz, 0dB, 10K)
10A
60dB
General Specification
Power Supply
Maximum Output Power
Continuous Power
Load Impedance
Output Voltage
Current Drain
Sound-Noise Rate
FM Tuner
Frequency Coverage
Sensitivity
Distortion
Frequency Rates
87.5-108.0MHz (Europe)
22dBμ
< 1%
30Hz~15KHz
522-1620KHz
aM Tuner
Frequency Coverage
Sensitivity 25dBμ
Note:
The specifications and other data can change without advanced
notification.
Some of the images in this user manual are only illustration.
EQ On/Off
Select “EQ ON ” POP CLASS ROCK EQ OFF
In Loud On mode the bass and treble response will be boosted.
SD Card Input
Insert SD card into the slot. After you hear a click sound the card is useable.
To remove the card please push the card and it will pop out from the slot.
Important! You have to format the SD card to FAT32 before use.
More options can be reached on the LCD screen. To know more
about these functions please download our detailed user manual
from the akai-atd.com website.
Here you will find more information about the use of multimedia
files.