
6
USING YOUR APPLIANCE
BEFORE FIRST USE
1. Remove the speaker from the box.
2. Remove any packaging from the
product.
3. Retain all packaging until you have
checked and counted all the parts and
contents against the parts list.
4. Dispose of the packaging in a
responsible manner.
CHARGING THE SPEAKER
To charge the Bluetooth Cylinder Fabric
Speaker, connect the supplied micro USB
cable to the USB charging port and the
other end to your computer or USB charging
device. Make sure to charge for at least 4
hours before using the Speaker for the rst
time.
PAIRING A SPEAKER WITH PHONE /
BLUETOOTH ENABLED DEVICE
1. Turn on the Bluetooth speaker
by pressing the Power button for
2-3 seconds. The speaker will
automatically start in Bluetooth mode.
2. Turn on your Bluetooth enabled device
and activate the Bluetooth function.
3. Search for the Bluetooth device,
“A58076” will show up.
4. If required, enter the password ‘0000’
to conrm and nalize pairing.
5. Your Speaker should now be paired
with your device.
6. Press the Power button for 3-4 seconds
to shut down the speaker.
CONNECTING TO AND ANSWERING THE
PHONE
In Bluetooth mode, and when your phone is
paired, select the pairing name of A58076.
When there is an incoming call, press the
Play/Pause button to answer it in hands-
free mode. Short press to hang up.
PLAYING MUSIC
Play/Pause: In music mode (Bluetooth),
touch the Play/Pause key momentarily to
start or pause playback.
Mode switching: Touch the [M] key
momentarily to switch between Bluetooth
and TF Card functions.
Volume Down/Previous track: In music
mode, tap the - button once to reduce the
volume or long press it to skip back to the
beginning of the current track. Long press
this button once and then immediately long
press it again to skip back to the previous
track on your playlist.
Volume Up/ Next Track: In music mode, tap
the + button once to increase the volume,
or long press it to skip forward to the next
track on your playlist.
DC5V (MICRO USB charging interface):
When charging, a light will illuminate by
the micro USB port. Once the speaker
is fully charged the light will switch o
automatically.