Akai CEU7100-BT User manual

CEU7100-BT
INSTRUCTION MANUAL
Bluetooth Tower Speaker with
USB Charger
Thank you for purchasing this Bluetooth Speaker System. Please read this instruction manual carefully
before using this product to ensure proper use. Keep this manual in a safe place for future reference.
www.AKAI-USA.COM

Contents
Bluetooth Tower Speaker1.
AC/DC Power Adaptor
2.
Base
3.
Screws
4.
Line-in Cable
5.
If you are missing any parts above, please contact ADT Digital LLC.
Tel: [phone]
Fax: [phone]
Instruction Manual
6.
Warranty Card
7.
ADT Digital LLC
EN - 1

C A UTION:T O P R EVENT T HE RISK O F
ELECTRIC SHOCK, DO NOT REMO V E
COVER OR BACK. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
CAUTION
RISKOF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF
FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
This symbol is intended to alert you to
the presence of uninsulated dangerous
voltage within the product’s enclosure
that might be of sufficient magnitude to
constitute a risk of electric shock. Do
not open the product’s case.
This symbol is intended to inform you
t h at important operating and
maintenance instructions are included
in the literature accompanying this
product.
DRIPPING WARNING
The product shall not beexposed to dripping or
splashing and that no objects filled with liquids,
such as vases, shall be placed on the product.
VENTILATION WARNING
The normal ventilation of the product shall not be
impeded for intended use.
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
Le présent appareil est conforme aux Partie 15 des
règlements de la FCC et CNR d'Industrie Canada
applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions
suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouill
-age radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionne
-ment.
This class[B] digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.
Class ll equipment symbol
This symbol indicates that the power
adaptor has a double insulation system.
This equipment complies with FCC’s and IC’s RF
radiation exposure limits set forth for an
uncontrolled environment. The antenna(s) used for
this transmitter must be installed and operated to
provide a separation distance of at least 20 cm from
all persons and must not be collocated or operating
in conjunction with any other antenna or transmitter.
Installer must ensure that 20 cm separation
distance will be maintained between the device
(excluding its handset) and user.
FCC RADIATION EXPOSURE
STATEMENT
This device complies with Part 15 of the FCC Rules
and Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
FCC IMPORTANT
DECLARATION DE LA FCC RELATIVE
A L'EXPOSITION AU RAYONNEMENT
Cet appareil est conforme aux limites d'exposition
au rayonnement RF stipulées par la FCC et IC pour
une utilisation dans un environnement non contrôlé.
Les antenne utilisées pour cet émetteur doivent être
installées et doivent fonctionner à au moins 20 cm
de distance des utilisateurs et ne doivent pas être
placées près d’ autres antennes ou émetteurs ou
fonctionner avec ceux-ci. Les installateurs doivent
s'assurer qu’une distance de 20 cm sépare
l’appareil (à l'exception du combiné) des utilisateurs.
FCC ID: OWT-CEU7100BT
EN - 2

NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the radio interference regulations of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par
Industrie Canada.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Read Instructions- All the safety and operating instructions should beread before the product isoperated.
Retain Instructions- The safety and operating instructions should be retained for future reference.
Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
Follow instructions - All operating and use instructions should be followed.
Cleaning- Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning the exterior only. Do NOT attempt to clean the inside.
Attachments- Do not use attachments not recommended by the product manufacturer as they may cause
hazards.
Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen
sink, or laundry tub; in a wet basement,ornear a swimming pool, and the like.
Accessories - Do not place this product on an unstable cart, stand tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the
product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by
the manufacturer.
A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.
Ventilation -Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of
the product and to protect it from overheating, and these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This
product should not be placed ina built-in installation such as a bookcase or rack unless proper ventilation is
provided.
10.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television (which can be
determined by turning the equipment off), the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced / TV technician for help.
EN - 3

14. Lightning- For added protection for this product during a lightning storm, or when it is leftunattended and
unused for long periodsof time, unplug it from the wall outlet. This will prevent damage tothe product due to
lightning and power-line surges.
Overloading- Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result ina risk of fire or electric shock.
Object and Liquid Entry - Never push objects ofany kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result ina fire or electric shock. Never spill liquid of
any kind on the product.
15.
16.
Power sources - This product should be operated only from the type ofpower source indicated on the marking
label. If you are not sure of the type of power supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power, or other sources, refer to the operating
instruction.
Grounding or Polarization- This product may be equipped with a polarized alternating current line plug (a
plug having one bladewider than the other). This plug will fit into the power outletonlyone way. This isa safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail
to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
12.
11.
Servicing- Do not attempt to service thisproduct yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following condition:
a)
b)
c)
d)
e)
f)
When the power-supply cord or plug is damaged,
If liquidhas been spilled, or objects have fallen into the product,
If the product has been exposed torain or water,
If the product does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions as an improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the product to
its normal operation.
If the product has been dropped or damaged in any way, and
When the product exhibits a distinct change inperformance - this indicates a need for service.
17.
18.
Replacement Parts - When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result infire, electric shock, or other hazards.
19.
Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
13.
Safety Check- Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
Unplug this apparatus during lighting storms or when unused for long periods of time.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have beengiven supervisionorinstruction
concerning use of the appliance by a person responsible for their safety.
20.
21.
22.
23.
EN - 4

Children should be supervised to ensure that they do not play with the appliance.
Ensure children and babies do not play with plastic bags or any packaging materials.
24.
25.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Avertissement: pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil
sous la pluie et l’humidité.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such
as vases, shall be placed on apparatus.
L’appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant
de liquide, tel qu’un vase, ne doit être placé sur l’objet.
The MAINS plug / power adaptor is used as the disconnect device, it should remain readily operable
during intended use.
In order to disconnect the apparatus from the mains completely, the main plug / power adaptor should
be disconnected from the mains socket outlet completely.
La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation.
Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du secteur.
WARNINGS:
EN - 5

BACK SIDE
TOP PANEL
1
2
3
4
5
6
7
8
9
10
11
1. USB Charger
2. AUX-IN Jack
3. Status Indicator
4. Source Button
5. EQ Button
6. Power Button
7. Play/ Pause Button
8. Volume - Button
9. Volume + Button
10. Skip Forward/ Tune + Button
11. Skip Backward/ Tune - Button
12
13
12. FM Antenna
13. DC Jack
EN - 6

.
ASSEMBLING
Put the base under the bottom of the speaker. Use two screws provided to tighten the base and the
speaker. Following the direction shown below.
EN - 7

CONNECTING TO AC POWER
TURNING THE UNIT ON/OFF
Insert the small end of AC power adaptor into the DC IN Jack at the back of the unit. Insert the AC
power adaptor to wall outlet having AC 120V, 60 Hz. This power unit is intended to be correctly
orientated in a vertical or floor mount position.
Note: When the unit is not operated by the AC power or unused for long period of time, please remove
the power adapter from the wall outlet and unplug from the main unit.
1. After connecting the AC power, the STATUS indicator would light up in RED to indicate the unit is in
standby mode.
2. Press the POWER button to turn on the unit.
3. Press the POWER button again to switch the unit to standby mode.
EN - 8

FM RADIO
LISTENING FROM LINE IN JACK
1. Power on the unit as previous procedures. Press SOUCE button repeatedly until the status
indicator turns to GREEN.
2. Press and hold TUNE +/ - buttons to forward or backward search FM radios. It will stop when a FM
radio station has been searched.
3. Press VOLUME +/ - buttons to adjust volume to a comfortable level.
NOTES:
To obtain the best FM reception, fully extend the FM antenna. Avoid close proximity to the speakers
and other electrical appliance.
1. Power on the unit as previous procedures. Press SOURCE button repeatedly unitl the status
indicator turns to PURPLE.
2. Connect headphone/ earphone jacks from the external audio player to the LINE IN jacks on the unit
by the supplied LINE-IN cable.
3. Power on the external player and start playback as usual.
4. Press the volume +/- buttons to adjust volume level.
BLUETOOTH PAIRING AND PLAYBACK
1. Power on the unit as previous procedures. Press SOURCE button repeatedly unitl the status
indicator turns to BLUE and blink.
2. Power on the external player and activate bluetooth function. Search and start pairing bluetooth
devices. (For details pairing procedures, please refer to the user’s manual of your player.).
3. When the external player searched the unit, our model number “ CEU7100-BT ” will appear on the
display of the external player. After pairing the status indicator will stay on.
4. Play the music in the external player as usual.
EN - 9

USING USB CHARGER
You can charge your smartphone or tablet through the USB charger (DC 5V, 2.1A) at any
time. Use the USB cable of your mobile device for connection.
EN - 10

CARE AND MAINTENANCE
1. Place the unit on a level surface away from sources of direct sunlight, excessive heat caused by
heating equipment, humidity, rain or sand.
2. Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other
protective material should be placed between it and the furniture.
3. Do not clean your unit by water directly. Clean the unit with a soft, clean cloth slightly moistened with
plain lukewarm water only.
4. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of
the unit.
5. Do not attempt to disassemble your product.
6. Do not paint your product with lacquer or aerosol.
7. Do not drop, throw or try to bend your product.
8. Do not expose your product to open flames.
TROUBLESHOOTING
Check the connection of the
AC/DC adaptor between the unit
and wall outlet.
Volume control is set at minimum
or mute.
Check that the volume control is
NOT at minimum.
Check that it is not set to mute.
The volume control of external BT
player (or audio player) is too low.
No sound
No power when
POWER is on
Increase the volume of external
BT player (or audio player).
PROBLEM POSSIBLE CAUSE SOLUTION
No sound in
Bluetooth (BT) mode
The pairing had not ben done
properly.
Check if you have pairing or not.
It needs to pair the external BT
player and the speaker with
password “0000” or “1234” before
1st time listening.
AC/DC adaptor is not plugged into
a wall outlet or the connector is not
plugged into the power supply or
the DC IN jack of the unit.
EN - 11

SPECIFICATION
Weight 6.2 lb. ( 2.8 kg)
3 watts + 3 watts (RMS)
8 ohms
Audio Section
Output Power
Output Impedance
Dimensions
Power Source (AC/DC Power Adaptor)
6.7”W x 6.7”D x 36.6”H
17W x 17D x 93H cm
Input: AC100 - 240V, 50/60Hz, 0.5A
Output: DC 12V, 1200mA
IMPORTANT: Due to the continued functioning of revisions and improvements in the design of our
products, specifications are subject to change without notice.
EN - 12