Akaso Brave 6 Plus User manual

USER MANUAL
AKASO Brave 6 Plus Action Camera
V1.2

Mount 1
Mount 6
Mount 3 Mount 5Mount 4
Mount 7
Tethers
Mount 2
Bandages
Battery
USB Cable
WHAT'S IN THE BOX
Lens Cloth
Handle Bar/
Pole Mount
Helmet Mounts
1
Waterproof
Housing
Remote Quick Start Guide
Charger
Brave 6 Plus
Mount 8
Clip 1
Quick Start Guide
AKASOBrave 6 Plus Action Camera
Protective Backdoor
1
Clip 2

2
YOUR BRAVE 6 PLUS
10
9
2
13
6
5
4
7
8

3
11
Shutter/Select Button
Power/Mode/Exit Button
Up/Wifi Button
Down Button
Speaker
Lens
USB Type-C Port
Micro HDMI Port
Touch Screen
Battery Door
MicroSD Slot
Note: The camera does not record sound when it is in the waterproof case.
1
2
3
4
5
6
7
8
9
10
11

4
GETTING STARTED
Welcome to your AKASO Brave 6 Plus. To capture videos and photos, you need a
microSD card to start recording (sold separately).
MICROSD CARDS
Please use brand name microSD cards that meet these requirements:
• microSD, microSDHC or microSDXC
• UHS-III rating only
• Capacity up to 64GB (FAT32)
Note:
1. Please format the microSD card first in this camera before using. To keep your
microSD card in good condition, reformat it on a regular basis. Reformatting
erases all your content, so please make sure to offload your photos and videos
before reformatting.
2. FAT32 format microSD card stops recording when the file size reaches to 4GB,
and starts to record again on a new file.
POWERING ON AND OFF
To Power On:
Press and hold the Power button for 3 seconds. The camera beeps while the camera
status light is on. When information appears on the display, your camera is on.
To Power Off:
Press and hold the Power button for 3 seconds. The camera beeps while the camera
status light is off.
SWITCHING MODE
To Switch Mode:
Turn on the camera, swipe your finger across or up the screen to change modes.
TURNING ON AND OFF Wifi
Turn on the camera, press Up button to turn on Wifi, and press again Up button to
turn off Wifi.

5
There are 5 modes: Video, Photo, Video Settings, Photo Settings and Camera
Settings.
OVERVIEW OF MODES
VIDEO MODE
Video Mode is the default mode when you turn on the camera.
In Video Mode, press Shutter button, the camera starts recording video.
Press Shutter button again to stop recording video. Long press Up or Down button
to adjust the zoom level.
Video Photo
Video Settings Photo Settings Camera Settings
4K30
00:01:56/00:33:52 TF

6
PHOTO MODE
Swipe your finger across the screen to switch to Photo Mode after you turn on
camera. In Photo Mode, press Shutter button to take photos. Long press Up or
Down button to adjust the zoom level.
VIDEO SETTINGS
Turn on the camera, swipe your fingers up the screen, choose Video Settings to
enter the Video Settings menu. You can change video settings in this mode.
Video Setting
Video Setting
Resolution
Image Stabilization
20M
0011/3482 TF

7
PHOTO SETTINGS
Turn on the camera, swipe your fingers up the screen, choose Photo Settings to
enter the Photo Settings menu. You can change photo settings in this mode.
CAMERA SETTINGS
Turn on the camera, swipe your fingers up the screen, choose Camera Settings to
enter the Camera Settings menu. You can change camera settings in this mode.
Photo Setting
Photo Setting
Resolution
Shutter interval
Camera Setting
Upside Down
Filter
Scene Mode

8
CUSTOMIZING YOUR BRAVE 6 PLUS
VIDEO SETTINGS
1. Video mode: Normal Video/Driving Mode/Time Lapse Mode/Slow Motion Video/
Still Photo/Loop Video
Default setting is Normal Video.
Driving Mode
If you turn on Driving Mode and connect camera with car cigarette lighter, the camera
will turn on automatically if you start your car and will turn off if you stop your car.
Loop Recording Interval: 1 Min/3 Min/5 Min/8 Min
Default setting is 3 Min.
Time Lapse Mode
In Time Lapse Video mode, press Shutter button, the camera records video from
frames captured at specific intervals.
Note: Time Lapse Video is captured without audio.
Time Lapse Interval: 1 Sec/2 Sec/5 Sec/10 Sec/ 30 Sec/60 Sec
Default setting is 2 Sec.
Slow Motion Video
In Slow Motion Video mode, press Shutter button, the camera records slow motion
video.
Still Photo
In Still Photo mode, the camera will automatically take still photos during video
recording.
Loop Recording: Off/1 Min/3 Min/5 Min/8 Min
Default setting is Off.
Still Photo Time: 3 Sec/5 Sec/10 Sec/30 Sec
Default setting is 3 Sec.
Loop Video
Loop Recording Interval: 1 Min/3 Min/5 Min/8 Min
Default setting is 3 Min.

9
Loop recording allows your camera to overwrite old files with new files. Once the
memory card becomes full, the camera will delete the first video file to make room
for the latest file. For example, if the setting for loop recording is “1 Minute”, then the
camera will create video clips of 1 minute in length, and a 1-minute clip will be
deleted when the camera needs more memory.
2. Resolution: 4K30FPS/2.7K30FPS/1440P60FPS/1440P30FPS/1080P90FPS/
1080P60FPS/1080P30FPS/720P120FPS/720P60FPS
Default setting is 4K30FPS.
Note: When capturing video at high resolutions or high frame rates in warm
ambient temperatures, the camera may become warm and use more power.
3. Image Stabilization: On/Off
Default setting is Off.
This setting adjusts the footage to offset for motion during capturing. The result is
smoother footage, especially in activities with relatively small but fast motion like
cycling, motorcycling, and handheld uses.
4. Video Encode: H.264/H.265
Default setting is H.264.
Video encode is basically a process of converting a given video input into a digital
format that is compatible with most types of Web players and mobile devices.
5. Angle: Wide/Medium/Narrow
Default setting is Wide.
The angle refers to how much of the scene (measured in degrees) can be captured
through the camera lens. Wide angle captures the largest amount of the scene,
while Narrow angle captures the least.
6. Distortion Calibration: On/Off
Default setting is On.