Akces-Med ACTIVALL User manual

R
DYNAMIC STANDING FRAME
ACTIVALL
ASSEMBLY MANUAL
™

Akces-Med Sp. z o.o. Company introduced
quality management system
ISO 13485 regarding production, sales and
service.
The system is certified by Det Norske Veritas.
CAUTION! Manufacturer takes responsibility for proper
usage of the device only when the product was purchased
from qualified Akces-Med employee or at specialized medical
store.
!
13485
QUALITY
MANAGEMENT
SYSTEM
Medical product first class according to the Regulation 93/42/EWG
of European Parliament and Council regarding medical products.
For this product the producer issued relevant declaration of conformity.
Producer's identification number in the Registration Department of Healing Products,
Medical Products and Biocide Products:
PL/CA01 04088/W

LIST OF ELEMENTS:
(1) (1 pcs)Pelotte from chest brace
(3) Pelotte from pelvic brace ( 1 pcs)
R
2
(2) (2 pcs)Bracket from chest brace
(4) Base with castors ( 1 pcs)
(5) M6 screw ( 8 pcs) (6) M6 hexagon nut ( 8 pcs)

R
4

DESCRIPTION ON HOW TO ASSEMBLE ACTIVALL STANDING FRAME
Please follow these steps so as to unfold ACTIVALL:
Assemble chest brace :
źinsert bracket from chest brace (2) into frames of chest pelotte (1) on
its both sides;
STAGE 1.
R
5
źnext, brackets (2) should be mounted with the aid of screw (5) as well
as nut (6). Screws together with nuts (there are two sets on both sides
of brace) should be inserted into holes and fastened by means of Allen
wrench.

R
6
STAGE 2. Assemble pelvic brace
źplace brackets from pelvic pelotte at an angle 90°;

R
7
źnext, brackets should be mounted on pelvic pelotte (3) with the aid of
screw (5) as well as nut (6). Screws together with nuts (there are two sets
on both sides of brace) should be inserted into holes and fastened by
means of Allen wrench.

R
8
STAGE 3. Place pelvic brace (3) on the base with castors (4) :
źinsert brackets from pelvic brace into first frame from the base with
castors (4).
It is necessary to tighten firmly knobs once brace is mounted as well as
its height is adjusted!

R
9
STAGE 4. Place chest brace (3) on the base with castors (4) :
źinsert brackets from chest brace into second frame from the base with
castors (4).
It is necessary to tighten firmly knobs once brace is mounted and its
height is adjusted!

R
10
STAGE 5. Place pelvis stabilizing harness and fasten it on pelvic pelotte.
Correctly mounted Activall. Remember to adjust product to the patient
before use!