Akces-Med ULISESevo User manual

ULISESevo™
ASSEBBLY MANUAL
SPECIAL NEEDS STROLLER

R
5 903240 632688
CAUTION! Manufacturer takes responsibility for proper usage
of the device only when the product was purchased from
qualified Akces-Med employee or at specialized medical store!
CAUTION! AKCES-MED Ltd. reserve the right to introduce
technical and trading changes in the content of the instruction
without warning.
Medical product first class according to the Regulation 93/42/EWG of
European Parliament and Council regarding medical products. For this
product the producer issued relevant declaration of conformity. Producer's
identification number in the Registration Department of Healing Products,
Medical Products and Biocide Products: PL/CA01 04088/W
Akces-Med. Sp. z o.o. Company introduced quality
management system ISO 13485 regarding production, sales
and service. The system is certified by Det Norske Veritas.

: www.akces-med.com '[phone] *e[email protected]
CONTENTS
ULISESevo
1.Components...........................................................................................................................4
2.Detailed assembly instruction..............................................................................................6
2.1 Stroller frame...............................................................................................................6
2.2 Footrest........................................................................................................................7
2.3 Front wheels...............................................................................................................7
2.4 Rear wheels..............................................................................................................10
2.5 Seat upholstery........................................................................................................11
2.6 Backrest upholstery................................................................................................14
2.7 Headrest....................................................................................................................16
2.8 5-points belts...........................................................................................................18

COMPONENTS
ULISESevo
4: www.akces-med.com '[phone] *e[email protected]
4
3
( x 2 pcs.)
(front x 2 pcs.)
rear inflatable wheel
PU wheel
(wheel bolt cap x 2 pcs.)
(flat washer x 2 pcs.)
(large flat washer x 2 pcs.)
(self-locking nut x 2 pcs.)
1
2
4
3
6
14
(footrest x 1 pc.)
5
1
2
6 7
8
10
9
5
13
13 (stroller frame x 1 pc.)
14
11
12
8
7 (long Allen screw x 2 pcs.)
(spacer bushing x 4 pcs.)
(front wheel fork x 2 pcs.)
(short Allen screw x 2 pcs.)
(bolt pad x 2 pcs.)
(hexagon head bolt x 2 pcs.)
9
10
11
12

ULISESevo
5
: www.akces-med.com '[phone] *e[email protected]
17
16
20
19
21
22
(upholstery – seat x 1 pc.)
(upholstery – backrest x 1 pc.)
(upholstery – bottom seat x 1 pc.)
(small Allen screw x 2 pcs.)
(headrest x 1 pc.)
(5-point belt strap x 2 pcs.)
(5-point belt cover with fastening x 1 pc.)
(long belt with fastening x 1 pc.)
15
16
17
18
19
20
15
21
22
18

5DETAILED ASSEMBLY INSTRUCTION
ULISESevo
2
2.1. STROLLER FRAME
In order to unfold the stroller frame (14),
you should set the backrest tubes
vertically (fig.1). Afterwards, pull the
stroller push handle backwards until the
folding mechanism snaps. (pic.2, 3).
2.2. FOOTREST
In order to assemble the footrest (13), you should set the footrest tubes
vertically (pic. 4). Afterwards, insert the tubes into the stroller frame (pic. 5) and
secure them with 2 quick couplings (pic. 6,7).
pic.1
pic.2 pic.3
pic.4 pic.5
6: www.akces-med.com '[phone] *e[email protected]

ULISESevo
pic.6 pic.7
2.3.
(pic.9, 10).
FRONT WHEELS
The next step is assembly of the front wheels (2). In order to do that, you should,
in the correct order, put the flat washer (4) and large flat washer (5) on the wheel
fork (9), and then stick the short screw (10) from the bottom (pic 8.) Afterwards,
tighten the wheel fork to the stroller frame
pic.9
pic.10
pic.8
9
10
4 5
7
: www.akces-med.com '[phone] *e[email protected]

ULISESevo
Insert the long Allen screw (7) into the
round hole as shown in the picture (pic.11).
Then, put the spacer bushing (8) and PU
wheel (2) on it (pic 12). The spacer bushing
should be placed between the inner side of
the wheel fork and wheel.
pic.11
pic.12
Put the second spacer bushing (8) from the second side (pic.13).
pic.13
8 : www.akces-med.com '[phone] *e[email protected]

ULISESevo
The screw should be tightened by use of
Allen wrench (pic. 14) so that the screw
head is not fully tightened (pic.15).
Insert the self-locking nut (6) into the hexagonal hole as shown in the picture
(pic. 16, 17), and then fully tighten the screw.
pic.14
pic.15
pic.17
pic.16
Repeat the above with the second small wheel.
9
: www.akces-med.com '[phone] *e[email protected]

ULISESevo
2.4. REAR WHEELS
The next step is assembly of the rear wheels (1). Insert the hexagon head bolt
(12) into the hole from the outer side (pic. 18,19). Afterwards, put the bolt pad
(11) from the other side (pic. 20, 21).
Attach the wheel to the stroller frame (pic. 22,23), tighten the screw (pic. 24), and
then attach the wheel bolt cap (3) (pic. 25).
pic.19
pic.18
pic.21
pic.20
pic.23
pic.22
10 : www.akces-med.com '[phone] *e[email protected]

ULISESevo
2.5.SEAT UPHOLSTERY
In order to attach the upholstery, you should first assemble the bottom of the
seat (17) (pic. 28). To do that, put the upholstery on the seat frame. Keep in mind
that strap buckles should be facing downwards.
FRONT
BACK
1
2
3
1
2
3
pic.25
pic.24
pic.27
pic.26
pic.28
Repeat the above with the second large wheel.
11
: www.akces-med.com '[phone] *e[email protected]

ULISESevo
Fasten the upholstery to the frame by use of Velcro straps. The last strap (strap
No. 3) should be interlaced through the opening indicated in the picture
(pic.29,30), and then fasten all 3 straps with Velcro from the seat underside (pic
31,32). Make sure that straps cover the seat frame.
Now you are able to attach the seat upholstery (15) as shown in the picture (pic.
33,34).
pic.30
pic.29
pic.32
pic.31
pic.34
pic.33
12 : www.akces-med.com '[phone] *e[email protected]

ULISESevo
Fasten the seat upholstery to the stroller
frame by use of Velcro straps (pic. 35). Make
sure that straps cover the seat frame.
pic.35
The straps should be fastened so as to overlap with the opening in the frame.
Fasten the strap to the frame by use of small Allen screw (18) (pic. 36-39).
pic.36 pic.37
pic.39
pic.38
13
: www.akces-med.com '[phone] *e[email protected]

ULISESevo
In the final step, fasten the Velcro straps
under the seat close to the footrest (pic.40).
pic.40
2.6. BACKREST UPHOLSTERY
To prepare the backrest upholstery (16) for attachment, you should first
unfasten the zipper in the upper part of the upholstery (pic. 41,42).
pic.41 pic.42
Attach the upholstery to the backrest frame starting from the upper part, in
accordance with the following scheme (pic. 43,44).
pic.43 pic.44
14 : www.akces-med.com '[phone] *e[email protected]

15
: www.akces-med.com '[phone] *e[email protected]
ULISESevo
The upholstery should be fastened behind
the backrest by use of Velcro strap (pic 45,
47). Make sure that straps cover the
backrest frame.
In order to make fastening of the last bottom belt easier, it is recommended to
bend the backrest forward. To do that, pull the indicated strap upwards and
simultaneously push the backrest forward (pic. 48, 49). Fasten the strap in the
same way as the previous ones (pic 50, 51).
pic.46 pic.47
pic.49
pic.45
pic.48

16 : www.akces-med.com '[phone] *e[email protected]
ULISESevo
pic.51
pic.50
In the final step, fasten the flap located in the lower part of the backrest using
Velcro (pic. 52, 53).
2.7. HEADREST
In order to assemble the headrest (19), you should insert the strings, contained
in the headrest, into the upholstery holes at the desired height (pic 54-56).
Afterwards, tie the strings from the backrest rear side (pic. 57).
pic.53
pic.52
pic.55
pic.54

ULISESevo
pic.57
pic.56
17
: www.akces-med.com '[phone] *e[email protected]
Then, insert the straps with buckle, located next to the headrest, into the
upholstery holes (pic. 58) and fasten them behind the backrest (pic. 59).
pic.58 pic.59
Afterwards, fasten the zipper in the upper part of the backrest (pic. 60, 61).
pic.60 pic.61

ULISESevo
18 : www.akces-med.com '[phone] *e[email protected]
2.8. 5-POINT BELTS
In order to attach the 5-point belts, you
should first attach the long belt with
fastening (22) (pic. 62, 63). The scheme
below shows the proper attachment of the
belt. By pulling the belt, make sure that
it is properly attached and that does not
come out of the plastic holder located
on the seat.
pic.63 pic.64
pic.62
Afterwards, attach the 5-point belt straps (20) to the backrest at the desired
height (pic. 65, 66). The straps should be secured by use of the knob.
pic.65 pic.66

19
: www.akces-med.com '[phone] *e[email protected]
Attach the 5-point belt cover (21) onto the
straps (pic.67).
Then, insert the straps into the seat belt
fastening (pic. 68, 69).
pic.67
ULISESevo
pic.68 pic.69
The ends of the straps have to be
interlaced through the triangular
elements located at the sides of the
stroller (pic. 70), and then insert their ends
into the regulator (pic 70, 71).
pic.71 pic.72
pic.70

ORTHOPAEDIC DEVICES MANUFACTURER
Date of issue: The last update: 22.09.2016 22.09.2016
Authorised Dealer
Akces-MED Sp. z o.o.
Jasionka 955B
36-002 Jasionka
tel. [phone]
www.akces-med.com
e-mail: e[email protected]
R