Alarm Lock TRILOGY DL2700 User manual

ADDENDUM
LEVER CONNECTOR REPLACEMENT KIT
WI1454 8/05
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
Publicly traded on NASDAQ Symbol: NSSC
© ALARM LOCK 2005
HOW TO REPLACE THE LEVER CONNECTOR (NEW PART HW572E)
2. Remove the Lever Handle
Spring (HW1220) and set aside.
1. With housing removed from door,
unscrew two screws and remove
the Spring Cover Plate (HW565) as
shown.
3. Remove Connector Plate (HW570).
5. Remove and discard Plastic Ring
(HW573).
4. Remove Lever Connector (HW572D)
and discard.
8. Replace the Spring Cover Plate
(HW565) and secure with two screws.
APPLICABLE MODELS
DL2700
DL3000
PDL3000
DL4100
PDL4100
DL2800
Spring Cover Plate (HW565)
Screws (2)
Connector
Plate (HW570)
Lever Connector
Old (HW572D)
New (HW572E)
Outside Housing
Lever Handle
Spring (HW1220)
Spring Cover
Plate
Lever Connector
6. Install new clear plating Lever
Connector (HW572E) in place of
old Connector (HW572D). Re-
install Connector Plate (HW570).
7. Install Lever Handle Spring
(HW1220).
Lever Handle Spring
Connector Plate
Plastic Ring
(HW573)
Connector Plate
(HW570)
Replace Lever Connector
(HW572D)
Lever Handle Spring
(HW1220)
Use this replacement kit with only those cylindrical locks that meet all three of the following requirements:
•Locks manufactured before August 20, 2005;
•Locks that contain a Plastic Ring (HW573--see exploded diagram below);
•Locks that exhibit a lever binding problem when installed on doors under 1 3/4" in thickness.
(To be removed)
Plastic Ring
(HW573)