Alcatel-Lucent APX 1000 User manual

APX®1000 Universal Gateway
Applications
Supports IP-based access services such as:
• Dial IP access services
• Wireline and wireless
• Port wholesaling
Features
• 10,800 DS0s per 7-foot rack
• Uniform capacity for consistent application
performance and density, up to platform’s
maximum port capacity
• SS7-based ICD for dial-up IP port wholesaling
• Feature-rich True Access® Operating System
(TAOS) — over 35 million ports installed
Worldwide
• Multiple IP protocol support including
IPDC, V.92 (with V.90), PIAFS (PHS), SDTN
V.110, WORM ARQ
Benefits
• Enhanced customer satisfaction — maximize IP
applications performance and capacity
• Flexibility — turn on revenue-generating IP
services whenever and wherever you want them
• Scalability — deploy your choice of high-speed
ingress and egress modules; implement access
solutions with support for 96 to 720 DS0s per
chassis.
• Reduced operating and ownership costs —
universal port technology and high port density in a
small footprint optimize CO space utilization
• Carrier-class network reliability — redundant
components maximize uptime and serviceability;
stable, carrier-proven TAOS helps sustain high
availability
• Easy to upgrade — processing modules
interchange among Universal Gateway platforms
• Unmatched investment protection — a wide range of
IP protocols support emerging applications
The APX
®
1000 Universal Gateway is a flexible, efficient and extensible access platform
that simplifies your delivery of high-demand IP services. A cost-effective compact switch
supports services such as port wholesaling for dial-up IP with SS7-based Internet call
diversion (ICD) and SDTN for financial transaction networks. Uniform capacity ensures
consistent performance and density for all applications. And years of experience provide the
stability networks demand.

APX®1000 Universal Gateway
Software Technical Specifications
1. Operating System
True Access®Operating System (TAOS) embedded
software technology for edge access platforms including
Lucent MAX TNT®and APX®family of Universal
Gateway and combines multi-platform support with
hardware-specific capabilities
2. Protocol Support
WAN/LAN
TCP/IP, UDP/IP, SCTP/IP, TCP Clear, PPP,
Sync/Async-PPP, HDLC, GRE
T1: PRI, RBS: Loop-Start, Wink-Start, R1, MF FG-D
E1: PRI, E1 R2 MF (country-specific call progress
tones)
Routing
RIP, RIP2, OSPF, BGP4, IGMP
VPN/tunneling
ATMP, L2TP, IP in IP, L2F, PPTP, Virtual Routers,
VLAN tagging
SS7 call control and signaling
IPDC, E1/T1 tunneling using IPDC
Fax-over-IP/modem-over-IP
Group III Fax, T.38, Transparent Fax, Transparent
Modem
Modem termination/data transfer
V.92: Modem on Hold, QuickConnect, PCM Up-stream
V.90, K56Flex, V.34bis, V.34, V.32bis, V.32, V.21*
V.22bis, V.22A/B, V.23*, V.44, V.42, V.42bis, V.110,
V.120, (PHS) PIAFS, Bell 103*, Bell212A*
* will not automode or dial-out
Administrative
FTP, TFTP, SNTP, DNS
ATM
UNI 3.1, PVC (CBR, VBR)
ISDN
AT&T, Northern Telecom, Q.931 GloBanD, Japan-PRI,
VN3-PRI, OneTR6-PRI, Net5-PRI, Danish-PRI,
Australia-PRI, National ISDN 2, NFAS with D channel
back-up Network and user-side ISDN
3. Bandwidth Management and Data Compression
MLPPP, MP/MP+, MPPC, BACP, TCP header
compression, ATM traffic shaping, STAC, MS-STAC,
STAC-9
4. QoS
RFC 2474 – Differentiated Services Code Point (DSCP)
support
RFC 791/1349 type of service (ToS) support
5. Security and Authentication
RADIUS, TACACS/TACACS+, PAP, CHAP, MSCHAP
v1+v2, DNIS, CLID, callback, token, local password,
call-type pre-authentication
6. Management
SNMPv2, NavisAccess™ System, SSHv1and SSHv2
(requires TAOS 14.0.x) for Telnet, console, COT
testing
Hardware Technical Specifications
7. Physical Dimensions
14.8” (D) x 17.2” (W) x 5.20” (H) (3 rack units) 3RU
Loaded system weight: 39 lbs. (approximate)
8. Chassis Architecture
6 slots total
1 dedicated slot for system controller module
1 dedicated slot for channel ingress card
4 general purpose slots for port processing, circuit and
packet modules
9. Port Density
576 data calls – via Channelized T1
672 data calls – via Channelized T3
720 data calls – via Channelized E1
10. Serviceability/Redundancy
Packet, circuit and processing modules hot-swappable
All modules and fan tray field-replaceable
Three (3) independent cooling fans with system
monitored fan-fail signals removable fan tray
AC and DC power supply units
- Hot-swappable, 1+1 redundant, load sharing, AC
input and DC input power supplies
- Mixed AC & DC supplies supported in the same
Chassis

APX®1000 Universal Gateway
11. APX® 1000 Universal Gateway Module Options
WAN Access Modules
Circuit switching (ingress)
– 24-port Channelized T1/E1
– 8-port Channelized E1
– 8-port Channelized T1
– 1-port Channelized T3
Packet switching (egress)
– 2 or 4-port 10/100 fast Ethernet
Processor Modules
288-port MultiDSP
240-port MultiDSP
96-port MultiDSP
12. Power Requirements
Power budget AC
Total typical values per fully loaded chassis:
Input power per chassis: 200 W
Heat dissipation: 683 BTU/h
Current intake @ 100Vac input: 2.0 A**
Current intake @ 115Vac input: 1.7 A**
Current intake @ 230Vac input: 0.9 A**
Recommended MAX:
Input power per chassis: 381 W
Heat dissipation: 1300 BTU/h
Current intake @ 100Vac Input: 3.8 A**
Current intake @ 115Vac Input: 3.3 A**
Current intake @ 230Vac Input: 1.7 A**
Power budget DC
Total typical values per fully loaded chassis:
Input power per chassis: 200 W
Heat dissipation: 683 BTU/h
Current intake @ -48Vdc input: 4.2 A**
Current intake @ -40Vdc input: 5.0 A**
Recommended MAX:
Input power per chassis: 361 W
Heat dissipation: 1233 BTU/h
Current intake @ -48Vdc input: 7.5 A**
Current intake @ -40Vdc input: 9.0 A**
Configuration used for above:
1 x controller module, 3 x 288-port MultiDSP modules,
1 x 24-port T1 module,
1 x 2-port Ethernet module, 1 fan tray
** Per power supply
13. Operating Characteristics
Ambient operating temperature:
-0 C to 40 C (-5c to +55c for short term per GR63-
CORE)
Ambient storage temperature:
-40 C to +65 C
Relative humidity:
10% to 95% non-condensing
Operating altitude:
to 10,000 feet (3,050 M)
14. Regulatory Compliance
NEBS: Level 3 compliant, GR-63-CORE, GR-1089-
CORE, CLEI coded
EMC/EMI: FCC 15 Class A, R&TTE Directive (EN
55022, EN 300 386), Class A, EN 61000-3-2, EN
61000-3-3, AS/NZS 3548, Class A, CISPR 22 Class A,
VCCI Class A, CNS 13438 Class A
Safety: CSA NRTL (UL 1950, Third Edition), CSA
C22.2, No. 950, Third Edition, R&TTE Directive EN
60950 Including Amendments 1, 2, 3, 4, 11, IEC
60950 including Amendments 1, 2, 3, 4
Telecom: FCC Part 68, IC CS 03, JATE
To learn more about our comprehensive portfolio, please contact
your Alcatel-Lucent Sales Representative, Alcatel-Lucent Business
Partner or, visit our web site at www.alcatel-lucent.com.
This document is provided for planning purposes only, and does
not create, modify or supplement any warranties which may be
made by Alcatel-Lucent relating to the products and/or
services described herein. The publication of information
contained in this document does not imply freedom from patent
or other protective rights of Alcatel-Lucent or third parties.
APX, True Access and MAX TNT are registered trademarks,
and MAX and NavisAccess are trademarks, of Alcatel-Lucent
Copyright  2004, 2008
Alcatel-Lucent
All rights reserved
APX v6.0108