Alcatel-Lucent DeskPhone 8001 User manual

8001/8001G DeskPhone
User Manual
8AL90895USACed03
1821

8001/8001G DeskPhone
8AL90895USACed03
1/52
INDEX
Getting Started ....................................................................................................................... 3
Setting up the Phone .............................................................................................................. 4
Phone User Interface.............................................................................................................. 6
3.1 Hardware Component Instructions ................................................................................. 6
3.2 Phone Screen Display Features........................................................................................ 8
3.3 Basic Network Settings..................................................................................................... 9
3.4 SIP Account Settings....................................................................................................... 10
3.5 Basic Features ................................................................................................................ 11
3.5.1 Making a Call ........................................................................................................... 11
3.5.2 Anonymous Call....................................................................................................... 11
3.5.3 Redial....................................................................................................................... 11
3.5.4 Call Log..................................................................................................................... 12
3.5.5 Making Calls to Contacts ......................................................................................... 12
3.5.6 Multi-lines to Answer the Call ................................................................................. 12
3.5.7 Auto-Answer............................................................................................................ 13
3.5.8 Ending a Call ............................................................................................................ 13
3.5.9 Using Hold and Recover (Switch Calling Line) ......................................................... 14
3.5.10 Transferring Calls..................................................................................................... 14
3.5.11 Using Mute .............................................................................................................. 15
3.5.12 Do Not Disturb......................................................................................................... 15
3.5.13 3-way Conference.................................................................................................... 15
3.5.14 Voice Mail................................................................................................................ 17
3.5.15 Lock.......................................................................................................................... 17
3.6 Advanced Settings.......................................................................................................... 18
3.6.1 Using the Phone Book ............................................................................................. 18
3.6.2 Using Call Logs ......................................................................................................... 20
3.6.3 Peer-to-Peer ............................................................................................................ 21
3.7 Keypad Settings.............................................................................................................. 21
3.7.1 Language Setting ..................................................................................................... 21
3.7.2 Message................................................................................................................... 22
3.7.3 Time & Date............................................................................................................. 22
3.7.4 Ringtone and Volume Setting.................................................................................. 23
3.7.5 Searching Phone Book............................................................................................. 23
3.7.6 Features That Cannot be Set With the Keypad ....................................................... 23
WEB User Interface............................................................................................................... 24
4.1 Network.......................................................................................................................... 25
4.1.1 LAN Port................................................................................................................... 25
4.1.2 PC Port..................................................................................................................... 27
4.1.3 Advanced VPN Setting............................................................................................. 28
SIP Account........................................................................................................................... 29
5.1 Basic ............................................................................................................................... 29
5.2 Call.................................................................................................................................. 30
5.3 Security........................................................................................................................... 31

8001/8001G DeskPhone
8AL90895USACed03
2/52
Phone Setting........................................................................................................................ 32
6.1 Basic ............................................................................................................................... 32
6.1.1 Time Settings ........................................................................................................... 33
6.1.2 Call ........................................................................................................................... 34
6.1.3 VoIP Call Forwarding ............................................................................................... 36
6.1.4 QoS .......................................................................................................................... 36
6.2 Advanced........................................................................................................................ 36
6.2.1 Basic......................................................................................................................... 36
6.2.2 Advanced................................................................................................................. 37
6.3 Line Keys......................................................................................................................... 38
6.4 Function Keys ................................................................................................................. 39
6.5 Soft Key .......................................................................................................................... 40
6.6 Dial Plan ......................................................................................................................... 40
6.7 IP Strategy ...................................................................................................................... 41
Phone Book........................................................................................................................... 42
7.1 Group ............................................................................................................................. 42
7.2 Contacts ......................................................................................................................... 42
7.3 LDAP ............................................................................................................................... 43
7.4 Ban List........................................................................................................................... 44
Phone Maintenance ............................................................................................................. 45
8.1 Basic ............................................................................................................................... 45
8.1.1 HTTP Upgrade.......................................................................................................... 45
8.1.2 FTP Upgrade ............................................................................................................ 45
8.1.3 TFTP Upgrade .......................................................................................................... 47
8.1.4 Default Settings ....................................................................................................... 47
8.1.5 Reboot ..................................................................................................................... 48
8.2 Advanced........................................................................................................................ 48
8.2.1 Log ........................................................................................................................... 48
8.2.2 Auto-Provision......................................................................................................... 48
Password............................................................................................................................... 51
WEB and Settings or Information......................................................................................... 52
10.1 WEB User........................................................................................................................ 52
10.2 Note Tips ........................................................................................................................ 52

8001/8001G DeskPhone
8AL90895USACed03
3/52
Getting Started
About
The Alcatel-Lucent 8001/8001G DeskPhone is a highly innovative VoIP SIP phone. It can perfectly
satisfy all kinds of business communications. Alcatel-Lucent 8001/8001G DeskPhone integrates
a 132x64-pixel graphic LCD screen, a large resolution display, an elegant and intuitive user
interface, which provides a perfect experience. Its rich features can effectively improve business
communications. The Alcatel-Lucent 8001/8001G DeskPhone meets the demands of small and
medium enterprises, home offices and large enterprises. The 8001/8001G shares the same
software, while the 8001G supports dual-Gigabit ports compared with 10M/100M ports with
the 8001.
Feature Highlights
a) Multi-Language
The LCD display supports Multi-Language.
b) HD Voice
Special voice processing technology, high-fidelity voice quality, HD encoding, HD
handset ensures clear, realistic and smooth communication.
c) Advanced Calling Capabilities
Two lines with double color (GREEN & RED) LEDs, synchronously control or manage 2
calls, call queue, switch between lines, multi-party conference, call transfer.
d) All Types of Phone Books
It supports XML Personal Phone Books\LDAP\Enterprise Phone Book setc. This
feature satisfies customer's phone book requirements.
e) Support of HTTP\TFTP\FTP\Auto-Provision.
f) Support of PoE and Power Adapter.
g) 2-angle Adjustable Bracket, Wall-Mountable
An adaptor is required for compliance with standard TIA-570-C, section 8

8001/8001G DeskPhone
8AL90895USACed03
4/52
Setting up the Phone
a) Packing List:
Check the packing list before installation, if you find that anything is missing, please
contact your system administrator.
1*Alcatel-Lucent 8001(or 8001G) DeskPhone IP phone
1*Handset
1* Handset cord
1* Ethernet cable
1* Phone bracket
1* Safety sheet
b) Phone Installation:
This section introduces how to install the phone with the components available in
the pack:
Attach the bracket
Connect the handset and optional headset
Connect the network and power cables
(Please go to http://enterprise.alcatel-lucent.com/ to download the electronic
version of the detailed quick user guide for reference)
Attach the Bracket
Please firstly join part 1 of the bracket to the phone by following steps "a" to "b" as shown
here. Then join part 2 of the bracket to the lower holder or upper holder depending on the
desired phone angle, either high or low.

8001/8001G DeskPhone
8AL90895USACed03
5/52
Connect the Handset and Optional Headset
Connect the Network and Power Cables
You have two options for power supply. Your system administrator will advise you which one
to use.
AC power adapter
PoE(Power over Ethernet) IEEE802.3af
Note: If POE is available, the phone does not need to connect to the AC power adapter.
Make sure the Ethernet cable and switch/hub is POE compliant.
For Brazil, the AC power adapter is not included with the product and if necessary, an
INMETRO-certificated adapter must be used.

8001/8001G DeskPhone
8AL90895USACed03
6/52
Phone User Interface
3.1 Hardware Component Instructions
The main hardware components of the Alcatel-Lucent 8001/8001G DeskPhone IP Phone
are the LCD screen and the keypad.

8001/8001G DeskPhone
8AL90895USACed03
7/52
The hardware components of the Alcatel-Lucent 8001/8001G DeskPhone are described as
follows:
ITEM
DESCRIPTION
1
LCD Screen
Displays information about calls, messages, soft keys, time, date and
other relevant data:
•Call information —caller ID, call duration
•Icons (e.g. )
•Missed calls or second incoming caller's information
•Time and date
2
Light Status
Red - flashing: There is an incoming call or a call on hold.
Red - constant: Off the hook or in conversation
3
Line Keys
Green - constant: There is an on-going conversation on the line
Red - flashing: There is an incoming call
Green - flashing: The line is on hold
Dark: Accounts are idle
4
Soft Keys
These 4 programmable keys allow you to open services or launch
calls (depending on what has been configured)
5
OK Key
Confirm the action
6
Navigation Keys
Scroll through the displayed information, and in the idle state:
UP: Open the "All CONTACT LOGS"
DOWN: Open the "MISSED CALLS"
RIGHT: Open the "RECEIVED CALLS"
LEFT: Open the "DIALED CALLS"
7
C Key
Cancels actions or rejects an incoming call, and the other features:
In the idle state: Open the "Phone Status".
Diagnosis: Press and hold for 3 seconds to open
"HardwareDiagnosis".
MUTE: "MUTE" feature is activated if you press this button during
an ongoing conversation.
8
Functions Keys
Conference\Redial\Transfer\Hold
9
Speaker Key
Toggles the hands-free speakerphone mode.
10
Keypad
Provides the digits, letters and special characters in context-
sensitive applications.
11
Headset Key
Toggles and indicates the headset mode.
12
Message Key
Indicates and accesses voice messages.
13
Volume Keys
Adjusts the volume of the handset, headset, speaker and ringer.

8001/8001G DeskPhone
8AL90895USACed03
8/52
3.2 Phone Screen Display Features
If the phone has successfully started up and is ready to use, the idle LCD display will show
information as below:
ITEM
DESCRIPTION
1
TIME & DATE
TIME & DATE display in the middle of the screen
2
Auto-Answer Icon
If this feature is enabled, it will display "AA" at the top right corner
3
Missed Call
Missed Call under the TIME in the middle of screen
4
Line Status
There are four states as shown below:
a. : the network is disconnected
b. : account registration failed
c. : account successfully registered
d. : account successfully registered and DND feature is enabled.
The DND icon will also be displayed at the top right corner
5
Soft Key Area
These 4 programmable keys allow you to open services or launch calls
(depending on what has been configured)
6
Screen Top Icon
The Screen Top Icons from left to right are:
: Handset active state
:Speaker active state
:Headset active state
:Call MUTE
:Missed call
:Call forwarding
:Text message
:Keypad lock
:Network is unavailable

8001/8001G DeskPhone
8AL90895USACed03
9/52
3.3 Basic Network Settings
The phone supports three modes of Network Settings, including PPPoE\Static IP\DHCP.
DHCP Setting
Feature
Operating Steps
DHCP
Press OK or MENU > System Settings > Advanced Settings > Password
(empty by default) > Network > LAN Port
Press LAN Port to log in to the menu
Select "DHCP" mode
Press "Enter" key
Set the DNS\WEB Port\Telnet Port
Press "Save" key
"Network is changed, press OK reboot" message appears
Static IP Setting
Feature
Operating Steps
Static IP
Press OK or MENU > System Settings > Advanced Settings > Password
(empty by default) > Network > LAN Port
Press LAN Port to log in to the menu
Select "Static" mode
Press "Enter" key
Set the IP\Mask\GW\DNS\WEB port\Telnet port
Press "Save" key
"Network is changed, press OK reboot" message appears
PPPoE Setting
Feature
Operating Steps
PPPoE
Press OK or MENU > System Settings > Advanced Settings > Password
(empty by default) > Network > LAN Port
Press LAN Port to log in to the menu
Select "PPPoE" mode
Press "Enter" key
Set the User Name\Password\WEB Port\Telnet Port
Press "Save" key
"Network is changed, press OK reboot" message appears

8001/8001G DeskPhone
8AL90895USACed03
10/52
3.4 SIP Account Settings
The 8001/8001G DeskPhone makes calls based on SIP accounts. It can support one or two
accounts. Each account can be configured to a different SIP server.
If you want to...
Then...
Create a SIP account
-- 1) Select "System setting" > "Advanced setting";
-- 2) Enter the password required (empty by default) ;
-- 3) Select "SIP" > "Account SIP";
-- 4) Select one of the accounts you want to set, you can configure
the following parameters
- Enable account*: Select Enable
- Number of lines: Default is 2
- Description: Description of this account
- Display name: The name displayed on the screen
- Authentication user: The authenticated users are matched
with the SIP server (by default with the same account)
- Account*: The account matches with the SIP server (extension
number)
- User password*: The user password matches with the SIP
server
- SIP Server*: The primary SIP server, all calls through this
server
- Out Bound Server: The outbound SIP server
- STUN Type: Enable/Disable STUN feature
- STUN: Input STUN URL
- Auto Answer: Enable/Disable the auto-answer feature for this
account
* Note: When you making the settings, you can press Save to
apply them, and then you can see the status icon in the LCD is
idle. The parameters with the * mark above must be
set.
Disable SIP account
-- 1) Select “System setting" > “Advanced setting";
-- 2) Enter the password required (empty by default) ;
-- 3) Select “SIP" > “Account SIP";
-- 4) Select “Enable account" > “Disable";
-- 5) Select “Save" to save settings

8001/8001G DeskPhone
8AL90895USACed03
11/52
3.5 Basic Features
3.5.1 Making a Call
Here are some easy ways to place a call on the 8001/8001G DeskPhone:
If you want to...
Then...
Place a call using
the handset
Pick up the handset
-- 1) You can hear the dial tone;
-- 2) Enter a number;
-- 3) Press
- or wait 5 s (default value), then the
8001/8001G DeskPhone sends the
number automatically.
Place a call using a
speakerphone
Press Speaker button
Place a call using a
headset
Put on your headset, press
the Headset button so that
the status light is Red ,
and then do as using
speakerphone
3.5.2 Anonymous Call
You can use the anonymous call feature to block the identity and phone number from being
displayed to the called party when making a call. For example, you want to call to consult some
of the services, but you don't want to be harassed.
Enable Anonymous Call
Press OK or MENU > Function Setting > Anonymous
-- Press Enter or OK button ,
- You can select which Account you want to use, enable/disable
this feature and enable/disable rejecting anonymous calls
3.5.3 Redial
To redial the last call placed from your phone
Redial
-- Press REDIAL button to dial the last number
- or press the left navigation button > "Dialed number", select a
number, and press

8001/8001G DeskPhone
8AL90895USACed03
12/52
3.5.4 Call Log
Dial From a Call Log
-- 1) Press MENU or OK button > "Call history", you can select "All
Calls", "Missed calls", "Received calls" and "Dialed numbers",
- or press navigation button (in Standby interface) > select "All
Calls"(up) "Missed calls"(down), "Received calls"(left) and
"Dialed numbers" (right)
-- 2) Then press button.
NOTE: You can also press the "log" to log in to this menu when in
the idle state.
3.5.5 Making Calls to Contacts
You can also dial a contact from the Personal Phone Book.
Making Calls to
Contacts
-- 1) Press the MENU or OK button > "Phone Book", you can select
"Personal Phone Book", "Enterprise Phone Book", "LDAP" and
"Black List",
- or press Navigation button (in Standby interface) > select the
desired contact.
-- 2) Then press button.
NOTE: You can also press the "DIR" to log in to this menu when in
the idle state.
3.5.6 Multi-lines to Answer the Call
Multi-lines to Answer
the Call
-- 1) Another line button is red and flashing, light strip is red and
flashing;
-- 2) Press the flashing line button to answer (at this time, the
original call will be put on hold.)

8001/8001G DeskPhone
8AL90895USACed03
13/52
3.5.7 Auto-Answer
You can set the phone to let it auto-answer incoming calls.
Auto-Answer the
Incoming Call
-- 1) Enable the Auto-Answer feature.
-- 2) In Auto-Answer mode you can select one of the following options
in the MENU > Function Setting > Auto Answer > Device
Speaker
Handset
Headset
Note that if you use the Handset mode, you need to pick up the
handset to answer the call.
-- 3) Filter Groups
Auto-answer the incoming call from these special groups.
3.5.8 Ending a Call
To end a call, here are the options available in different contexts.
Hang up while using the
handset
-- Return the handset to its cradle,
- or press End
Hang up while using the
speakerphone
-- Press the Speaker button that is red
- or press the Line button of the appropriate line,
- or press End
Hang up while using the
headset
-- Press the Headset button (do not keep the headset mode),
- or press End (keep the headset mode)
Hang up one call, but
preserve another call on
the other line
-- Press End,
- or refer to the above three methods

8001/8001G DeskPhone
8AL90895USACed03
14/52
3.5.9 Using Hold and Recover (Switch Calling Line)
You can hold and resume calls. You can take a call on one line at anytime, and the other lines
would be put on hold. As a result, you can switch between different calling lines on your phone.
If you want to...
Then...
Put a call on hold
-- Press the HOLD button,
- or press the soft key
Hold a line and switch to
another line
Press another Line button for the appropriate line
Resume a call on current
line
-- Press the Line button,
Resume a call on different
line
Select the line you want to retrieve, then press the line button
NOTES
•Engaging the Hold feature typically generates music or a beeping tone.
•A held call is indicated by the yellow-green and flashing Line button or "Hold" on the
LCD screen.
3.5.10 Transferring Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the
call.
Talk to the transfer
recipient before
transferring a call
(consult transfer)
-- 1) Press TRANSFER button or press XFER;
-- 2) Enter number;
-- 3) Press then transfer the call,
- or wait five seconds (default value) then transfer the call
Transfer to idle lines
or other numbers
without talking to the
transfer recipient
(blind transfer)
-- 1) Press TRANSFER button or XFER;
-- 2) Press
-- 3) Enter number;
-- 4) Press ,then transfer the call;
- or wait five seconds(default)then transfer the call
Notes: today's Alcatel-Lucent OXO system does not support
blind transfer feature on 8001/8001G DeskPhone
Blind transfer to the
held line
-- 1) Press TRANSFER button or press XFER;
-- 2) Press the Line button of the held line

8001/8001G DeskPhone
8AL90895USACed03
15/52
3.5.11 Using Mute
With Mute enabled, you can hear other parties on a call but they cannot hear you. You can use
mute in conjunction with the handset, speakerphone, or a headset.
Toggle Mute on
Press Cbutton, a MUTE icon will appear at the top left of the
screen
Toggle Mute off
Press Cbutton again, the MUTE icon disappears
3.5.12 Do Not Disturb
You can use the Do Not Disturb (DND) feature to block incoming calls on your phone with a
busy tone (can also be set to voice mail or other extension numbers etc.).
Enable global DND
-- 1) Press DND;
-- 2) All enabled lines on the phone change to status and the icon
is .
Enable DND on a
single line
Press MENU or OK button > "Function setting" > "DND" > (select
line) "Enable"
Disable DND
-- Global DND enabled, press to disable global DND;
-- Line DND enabled, press twice ,
- or press MENU or OK button > "Function setting" > "DND" > (select
line) "Disable"
3.5.13 3-way Conference
You can enable a three-party conference: during the conversation, the three phone parties can
communicate with every other party.
If you want to...
Then...
Invite the transfer
recipient into a
conference
-- 1) When the transfer recipient answers the call, press the
CONFERENCE button or "CONF" on your phone;
-- 2) Then the held one, the transfer recipient and yourself will be
entered into a conference, and the LCD will display
status.
Invite the third party
into a conference in an
active call
-- 1) Press the "CONFERENCE" button or "CONF" in an active call;
-- 2) Enter the third party’s number;
-- 3) After connection with the third party, press the "CONFERENCE"
button or "CONF" again

8001/8001G DeskPhone
8AL90895USACed03
16/52
Establish a conference
with a held line
-- 1) When one phone line is on hold and the other line is busy,
press "CONFERENCE" button,
- or Press "CONF" soft key
-- 3) Press the held line's programmable button, the 3-way
conference is enabled.

8001/8001G DeskPhone
8AL90895USACed03
17/52
3.5.14 Voice Mail
When the phone gets a voice mail from a server, it will illuminate the voice mail button
Voice Mail
--1) Press the Voice Mail button (When Voice Mails are available,
icon is , when there are no messages, icon is
-- 2) Enter the user password
-- 3) The phone will log in to the voice mail server. You may need to
follow the instructions to listen to your messages.
3.5.15 Lock
You can enable/disable the lock function through MMI, when the lock feature is enabled, a
lock icon will be shown in the main screen.
Lock
-- 1) Menu -> System Settings -> Phone Settings
-- 2) Enter "Keypad Lock", click soft key "Shift" or left/right arrow
keys to choose the options:
1. "Lock All" means all the keys in the phone set will be locked
2. "Lock & Auto Answer" means all the keys will be locked,
while in auto-answer mode they will be unlocked
3. "Lock Menu" means the "Menu" soft key will be locked
4. "Lock Function" means the function keys will be locked,
while the dialing pad will be in unlocked status
5. "Disable" means disable the "Lock" feature
-- 3) "Phone Lock Time Out" is used to set the interval for how long
the set will be locked again after you unlock the set
-- 4) The lock password is controlled by Alcatel-Lucent SIP server
Notes: The lock feature is a user-oriented feature, if the phone
set is locked, the user can unlock the status through the MMI
and the phone set always remains unlocked until you unlock it
through the MMI. The lock password can be configured through
a solution, such as OmniVista 8770.

8001/8001G DeskPhone
8AL90895USACed03
18/52
3.6 Advanced Settings
3.6.1 Using the Phone Book
Enterprise Phone Book
Search a Contact
from Enterprise
Phone Book
-- 1) Press DIR in the idle status,
- or press "MENU" or "OK" button > "Phone book" > "Enterprise
Phone Book";
-- 2) Select "Enterprise Phone Book", press "OK" button;
-- 3) Press "Find" and enter the name for which you want to search.
Call a Contact from
Enterprise Phone
Book
--1) Press "DIR" in the idle status,
- or press "MENU" or "OK" button > "Phone book">"Enterprise
Phone Book",
-- 2) Select "Enterprise Phone Book", press "OK" button;
-- 3) Press "Find" and enter the name for which you want to search.
-- 4) When you find the right contact, you can launch the call.
Personal Phone Book
Add a Contact
-- 1) Press Phone Book,
- or press "MENU" button > “Phone book" > "Personal phone
book" > "View All",
-or press "OK" button > "Phone book" > "Personal phone book" >
"View All";
-- 2) Select "Add contact", press "OK" button;
-- 3) Use the navigation keys to select content, press "OK" button to
set and modify:
- Name: Set the name of the contact,
- Office Number: Set the contact’s office number
- Mobile Phone Number: Set the contact’s mobile phone number
- Others Numbers: Set the contact’s others numbers
- SIP Account: Set the contact call SIP account
- Group: The contact will be placed into one of the user's groups
-- 4) Press "Save" soft key to complete

8001/8001G DeskPhone
8AL90895USACed03
19/52
Add group
-- 1) Press "DIR" soft key,
-or press "MENU" button > "Phone book" > "Personal phone
book" > "View All",
- or press "OK" button > "Phone book" > "Personal phone book" >
"View All";
-- 2) Select the "Add group" then press OK button;
-- 3) Use the navigation keys to select content, press OK button to set
and modify:
- Group name: name of the group
--4) Press "Save" soft key to complete
Modify group
--1) Press "DIR" soft key,
- or press "MENU" button > "Phone book" > "Personal phone
book" > "View All",
- or press "OK" button > "Phone book" > "Personal phone book" >
"View All";
-- 2) Select the "Modify group" then press "OK" button ;
-- 3) Select the group you want to modify, press the "OK"button to
set and modify, press "Save" to save the change
Delete group
-- 1) Press "DIR" soft key,
- or press "MENU" button > " Phone book" > " Personal phone
book" > "View All",
- or press "OK" button > "Phone book" > "Personal phone book" >
"View All";
-- 2) Select the "Delete group" or OK button;
-- 3) Select the group you want to delete, press OK button
LDAP
Search a Contact
from LDAP
-- 1) Press "DIR" in the idle status,
- or press "MENU" or OK "button" > "Phone book" > "LDAP",
-- 2) Select "LDAP", press "OK" button;
-- 3) Press "Find" and enter the name or number you want to find in
the LDAP server.