Alcatel-Lucent IP Touch 4008 User manual

Alcatel-Lucent IP Touch 4008 / 4018 Phone & 4019 Digital Phone
www.alcatel-Lucent.com
En
Alcatel-Lucent IPTouch 4018 Phone
Handset
 Audio keys
 Function keys
Hang-up key: to terminate a call.
Hands-free/Loudspeaker Key: to make or answer a call without lif-
ting the receiver (Alcatel-Lucent IP Touch 4008/4018 Phone).
•Lit in hands-free mode or headset mode (short press).
•Flashing in loudspeaker mode (long press).
Intercom/Mute key:
•during a conversation: press this key so that your
correspondent can no longer hear you.
•terminal idle: press this key to answer calls automatically
without picking up the receiver (Not available in 'safe'
mode).
To adjust the loudspeaker or handset volume up or down
Messaging key to access various mail services
If the key flashes, a new voice message or a new text message has been
received.
'Redial' key : to access the 'Redial' function.
 Navigation
Up-down navigator: used to navigate around the home page, through the menus
or in a text zone when entering characters.
The home page consists of:
•information on the status of the set (set locked, call forward, etc.),
•date and time,
•set programming and configuration functions.
OK key: used to validate your choices and options while programming or configu-
ring.
Back/Exit key: to return to previous menu (short press) or return to first screen
(long press). You can also use this key to correct a character you entered.
OK
 Function keys and programmable keys
Guide key: use to obtain the name and number associated with the telephone, in-
formation on the pre-programmed keys or to access the set programming or confi-
guration.
Phone book key : phone book key to access your personal phone book (short
press) or to make a call by name (long press or press twice)*.
Pre-programmed function keys and programmable key
Lit when the function associated with the key is activated.
The 6-key block consists of:
two line keys,
one 'immediate forwarding or cancel call-forward' key,
one 'conference' key,
one 'transfer' key,
one direct call key to programme.
Only the line keys are enabled in 'safe' mode .
Alphanumeric keypad

This symbol indicates the functions that can be accessed in 'safe' mode .
According to the configuration the telephone system of your company, your phone set can auto-
matically switch to 'safe' mode in case of loss of connection with the system, in order to ensure
continuity of service . For more information, contact your installer or administrator .
The 'safe' mode is only available for 8 Extended Edition Series .
To avoid accidentally damaging the set telephone line connec-
tor, make sure you position the cord correctly in the compart-
ment intended for this purpose
.
!
3
English
Other
Customize your terminal
Modifying your personal code
Lock / unlock your telephone
follow
informations
displayed on the
screen
depending the displayed
informations, enter your password
or confirm*
Settings OK Options OR
Phone OK Password OK
Lock OK
SIP
Adjusting the audio functions
SIP
Adjusting screen brightness
Using your telephone
SIP
Identify the terminal you are on
SIP
Making a call
SIP
Receiving a call
SIP
Redialling
adjust ringing (melody, volume,
mode,...) by following instructions
displayed on the screen
long press
increase or decrease
the contrast
apply long press
displays your
telephone number
long press
lift the receiver hands free line key / programmed line
key
dial directly the
number for your
call
calling from your personal
directory
dial the number for
your call
To make an external call, dial the outside line access code
before dialling your correspondent's number.
lift the
receiver
hands free
(Alcatel-Lucent IP Touch 4008/
4018 Phone)
line key with light
flashing
last number redial
Settings OK Phone OK
Ringing OK
Settings OK Phone OK
Contrast OK OR OK
WhoamI OK
OR OR OR
2
6
5
3
ab c
def
jkl
mn
o
OR OK OR Dial by URI OK
OR OR
3gv19008bsac.fm Page 3 Lundi, 29. septembre 2008 3:45 15

4
Make a call-back request to a busy number
During a conversation
Sending DTMF signals
During a conversation you sometimes have to send DTMF signals, such as with a voice
server, an automated attendant or a remotely consulted answering machine. The function
is automatically cancelled when you hang up.
SIP
Calling a second person during a conversation
During a conversation, to call a second person. (the first call is on hold)
SIP
Transferring a call
During a conversation, to transfer the call to another number:
Three-way conference
During a conversation, a second call is on hold.
the number you are calling is
busy
Pre-programmed function keys are disabled in 'safe' mode. Use
MENU keys to access theses functions.
select the function associated with 'emit in voice
frequencies'
By default, your telephone in 'safe' mode is configured to send
codes in voice frequency.
dial directly the
number for your call
(not available in 'safe'
mode)
free line key
number to be
called
'transfer' programmed key
you are in
conference mode
“conference”
programmed key
¤Callback OK
¤MFcode OR Send DTMF OK
2
6
5
3
ab c
def
jkl
mn
o
OR New call OK OR
2
6
5
3
ab c
def
jkl
mn
o
OR Transfer OK
OR ¤Conference OK
Cancel conference and return to first correspondent.
Voice message service
Consulting your voice mailbox
If the key flashes, a new voice message or a new text message has been received.
Divert your calls to another number
SIP
Divert your calls to another number
Diverting calls to your voice mailbox
When you return, cancel all diversions
“conference”
programmed key
press the key next to 'consult voice or
text message'
follow informations
displayed on the screen
Pre-programmed function keys are disabled in 'safe' mode. Use
MENU keys to access theses functions.
press the 'call forward'
function key
dial the destination
number
select the function
associated with
'immediate forwarding'
apply dial the destination
number
press the ok key if
programming is not
automatically recorded*
select the function associated with 'immediate
forwarding'
Press the OK key if programming is not automatically
recorded*.
press the 'call forward'
function key
OR End conference OK
OK
2
6
5
3
ab c
def
jkl
mn
o
OR Forward OK
OK
2
6
5
3
ab c
def
jkl
mn
o
OK
Forward OK OK
OK
OR Forward OK
Directory
Using call by name*
You enter your contact's name in predictive text mode. In this mode, enter each letter of
the name by pressing only once on the key with this letter.
Program the keys in the personal phone book
Make a call using the personal phone book
Guarantee and clauses
This document describes the services offered by the Alcatel-Lucent IP Touch 4008/4018 Phone and 4019
Digital Phone sets connected to an Alcatel-Lucent OmniPCX Office or Alcatel-Lucent OmniPCX
Enterprise communication Server system. Safe' mode is only possible if the system is compatible with the
SIP standard and is configured correctly . For more information, please refer to the user guide for your
station .
Warning: never place your telephone in contact with water. To clean your telephone, you may however
use a damp soft cloth. Never use solvents (trichlorethylene, acetone, etc.) which may damage the plastic
parts of your telephone. Never spray it with cleaning products.
The ear piece and microphone area of the handset may attract metallic objects that may be dangerous
for the ear.
The wording is not contractual and may be subject to change. Some functions of your telephone are
controlled by a software key and the configuration of the unit.
We, Alcatel-Lucent Enterprise, declare that the products covered by this user guide are compliant with
the primary requirements of the Parliament and Council Directive 1999/5/CE. A copy of the original of
this declaration of compliance can be obtained from your installer.
Collection of these products at the end of their product life must be done selectively.
Alcatel-Lucent, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of
Alcatel-Lucent. All other trademarks are the property of their respective owners. The
information presented is subject to change without notice. Alcatel-Lucent assumes no
responsibility for inaccuracies contained herein.
Copyright © 2008 Alcatel-Lucent. All rights reserved
* Depending on your telephone system, contact your installer or consult the appropriate User Guide.
if necessary, confirm
cancellation of the
diversion
Certain functions of this section depend on your telephone
system, contact your installer or consult the appropriate User
Manual.(*)
long press enter the first letters of
the name
select the name from the
displayed list
follow
informations
displayed on the
screen
press and
release
select an empty entry in
the directory (0-9)*
press and
release
press the programmed
key directly (0 to 9)
select the contact to call start the call
Cancelfwd. OK
OK
*
OK
2
6
5
3
ab c
def
jkl
mn
o
OR OK
3gv19008bsac.fm Page 4 Lundi, 29. septembre 2008 3:45 15
à3GV19008BSAC010839ëóêä
PNC