Alcatel SPEED TOUCH PRO User manual

3EC 17059 ABAA TCZZA Ed. 01
SPEED TOUCH
PRO
User's Guide

3EC 17059 ABAA TCZZA Ed. 01
2/ 238
Status Released
Change Note BD F aa 34297
Short Title CD-UG STPro R3.2.6
All rights reserved. Passing on and copying of this
document, use and communication of its contents
not permitted without written authorization from Alcatel.

Contents
3EC 17059 ABAA TCZZA Ed. 01 3/ 238
Contents
1 Speed Touch Quick Guide 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1 Get Acquainted with your Speed Touch 12. . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2 Speed Touch Installation 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1 What you Need 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2 STPro Wiring 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3 Check your Service Provider's Offering 19. . . . . . . . . . . . . . . . . .
1.2.4 Configure your STPro (If Necessary) 20. . . . . . . . . . . . . . . . . . . . .
1.2.5 Surf the Internet 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.6 Detailed STPro Information 22. . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Wiring Guide - Ethernet and ATMF25.6 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1 LAN Cables 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2 Connecting Ethernet 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2.1 Ethernet Port(s) on your STPro 28. . . . . . . . . . . . . . . . . . . . . . . . . .
2.2.2 Single PC Ethernet Wiring 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2.3 LAN Ethernet Wiring 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3 Connecting the ATMF25.6 Port (Optional) 31. . . . . . . . . . . . . . . . . . . . . . . .
2.4 Ethernet vs. ATMF25.6 Connectivity 32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Wiring Guide - DSL, Power and Console 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1 Locating Ports 34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2 Connecting the DSL Port 35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3 Connecting the Power Adapter 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4 Connecting the Serial Port (Optional) 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Wiring Guide - Resumé 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Configuration and Use - Packet Services 43. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1 Supported Packet Services 44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2 Packet Services at a Glance 45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3 Selection Criteria 48. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 Configuration and Use - Transparent Bridging 49. . . . . . . . . . . . . . . . . . . . . . .
6.1 Preparatory Steps 50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.2 Using Bridging 51. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3 Bridging Configuration 52. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.4 Bridge Data 55. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 Configuration and Use - Bridged PPPoE 57. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1 Preparatory Steps 58. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.2 Using Bridged PPPoE 59. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents
3EC 17059 ABAA TCZZA Ed. 01
4/ 238
7.3 Bridged PPPoE Configuration 60. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 Configuration and Use - PPPtoPPTP Relaying 61. . . . . . . . . . . . . . . . . . . . . . . .
8.1 Preparatory Steps 62. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2 Using PPPoAPPTP Relaying 63. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.1 Preparing the PC for PPTP Tunneling 64. . . . . . . . . . . . . . . . . . . .
8.2.2 Using PPTP towards your STPro 65. . . . . . . . . . . . . . . . . . . . . . . . .
8.3 Example : MS Windows 98 DialUp Networking 66. . . . . . . . . . . . . . . . . . . .
8.3.1 Create a New DialUp Networking Icon 67. . . . . . . . . . . . . . . . .
8.3.2 Open a DialUp Session 70. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.3.3 Close a DialUp Session in Use 72. . . . . . . . . . . . . . . . . . . . . . . . .
8.4 PPPoA/PPTP Configuration 73. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 Configuration and Use - PPP & IP Routing 79. . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.1 Preparatory Steps 80. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.2 Using PPP & IP Routing 81. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.3 PPP Configuration 84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.4 PPP Entry Configuration 87. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.4.1 The PPP Configuration Page 88. . . . . . . . . . . . . . . . . . . . . . . . . . .
9.4.2 Authentication Related Configurations 89. . . . . . . . . . . . . . . . . . .
9.4.3 IP Routing Related Configurations 90. . . . . . . . . . . . . . . . . . . . . . .
9.4.4 Connection Related Configuration 94. . . . . . . . . . . . . . . . . . . . . .
10 Configuration and Use - CIP & IP Routing 97. . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.1 Preparatory Steps 98. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.2 CIP Configuration for a LIS 99. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.2.1 General CIP Configuration Procedure 100. . . . . . . . . . . . . . . . . . .
10.2.2 Retrieving LIS Parameters 101. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.2.3 Implicit Assignment Mechanism 102. . . . . . . . . . . . . . . . . . . . . . . .
10.2.4 Explicit Assignment Mechanism 103. . . . . . . . . . . . . . . . . . . . . . . . .
10.2.5 Configuring the STPro for CIP 104. . . . . . . . . . . . . . . . . . . . . . . . . .
10.2.6 Adding Appropriate Routes to the Routing Tables 105. . . . . . . . . .
10.2.7 Example Configuration 107. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.3 Using CIP & IP Routing 109. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.4 CIP Configuration 110. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11 Networking - ATM 117. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.1 The ATM Packet Switching Technology 118. . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.1.1 ATM Parameters 119. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.1.2 ATM and the STPro 120. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.1.3 ATM and Interfaces 121. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.2 ATMF25.6 Port Configuration 123. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.3 The Speed Touch Phonebook 124. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.3.1 The STPro 'Phonebook' Page 125. . . . . . . . . . . . . . . . . . . . . . . . . . .
11.3.2 Using the Phonebook 128. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents
3EC 17059 ABAA TCZZA Ed. 01 5/ 238
11.3.3 AutoPVC and the Phonebook 130. . . . . . . . . . . . . . . . . . . . . . . . . .
12 Networking Services - IP 133. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.1 Speed Touch and IP 134. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.2 Packet Services and IP 135. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.2.1 Transparent Bridging 136. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.2.2 PPPoAtoPPTP Relaying 137. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.2.3 Routed Packet Services 138. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.3 Speed Touch Addresses 139. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.3.1 STPro IP Address Types 140. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.3.2 Static IP Address Configuration 142. . . . . . . . . . . . . . . . . . . . . . . . .
12.4 Speed Touch DHCP 145. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.4.1 STPro DHCP Pages 146. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.4.2 The STPro DHCP Server 147. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.4.3 The STPro DHCP Client 153. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.5 Speed Touch Routing 154. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.5.1 The STPro IP Router 155. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.5.2 Configuring the STPro IP Routing Table 158. . . . . . . . . . . . . . . . . .
12.6 Speed Touch NAT&PAT 162. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.6.1 STPro and NA(P)T 163. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12.6.2 Packet Services and NA(P)T 164. . . . . . . . . . . . . . . . . . . . . . . . . . . .
13 Networking Services - DNS 167. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13.1 Speed Touch DNS Resolving 168. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13.2 Configuring the Speed Touch DNS Server 170. . . . . . . . . . . . . . . . . . . . . . . . .
14 Maintenance - Speed Touch Software 175. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14.1 Software Upload from the local LAN 176. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14.2 Software Download from the DSL WAN 181. . . . . . . . . . . . . . . . . . . . . . . . . . .
15 Maintenance - Speed Touch Password 183. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16 Maintenance - Speed Touch ToDefaults 185. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16.1 PingofLife 186. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16.2 Speed Touch Reset 189. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16.2.1 BrowsetoDefaults 190. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16.2.2 PingtoDefaults 191. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16.2.3 SwitchtoDefaults 192. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17 Maintenance - Speed Touch Web Interface 193. . . . . . . . . . . . . . . . . . . . . . . . . . .
17.1 Web Interface Preconditions 194. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17.1.1 Disabling Proxy Servers 195. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17.1.2 Disabling Proxying for Local IP Addresses 196. . . . . . . . . . . . . . . .
17.2 Browsing to the Speed Touch Pages 197. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17.3 Speed Touch Page Structure 198. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents
3EC 17059 ABAA TCZZA Ed. 01
6/ 238
18 Maintenance - Speed Touch CLI 201. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18.1 Native CLI Access 202. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18.1.1 CLI through a Telnet Session 203. . . . . . . . . . . . . . . . . . . . . . . . . . .
18.1.2 CLI via Serial Access 205. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18.1.3 CLI Command Basics 206. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Abbreviations 211. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AppendixA Speed Touch Troubleshooting 213. . . . . . . . . . . . . . . . . . . . . . . . . . . .
AppendixB Speed Touch Specifications 215. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AppendixC Speed Touch Default Assignments 227. . . . . . . . . . . . . . . . . . . . . . . .
AppendixD Safety and Agency Regulatory Notices 231. . . . . . . . . . . . . . . . . . . .

7/ 238
3EC 17059 ABAA TCZZA Ed. 01
Alcatel Speed Touch Pro
Introduction
The Alcatel Speed TouchPro DSL router provides highspeed access to the Internet and
Corporate networks for small office and fastidious home users and highspeed inter office
LANtoLAN connections.
For optimal Local Area Network (LAN) performance the Alcatel Speed TouchPro
includes a comprehensive set of features, as there are a DHCP server, DNS server and
NAT&PAT to name a few.

ADSL/POTS and
ADSL/ISDN
Terminolog
y
Safety instructions
8/ 238 3EC 17059 ABAA TCZZA Ed. 01
Three variants of Alcatel's Speed Touch Pro Asymmetric Digital
Subscriber Line (ADSL) routers exist:
An ADSL/POTS variant connecting to an analog POTS(*) line
two ADSL/ISDN variants connecting to a digital ISDN(**) line:
An ISDN variant compliant to ETSI standards
An ISDN variant compliant to both ETSI and ITU
standards.
(*) Plain Old Telephone Service (POTS)
(**) Integrated Services Digital Network (ISDN)
For readability, the Alcatel Speed TouchPro will be referred to
as STPro in this User's Guide.
Prior to connecting the Alcatel Speed TouchPro, read the
Safety Instructions in appendix D.
The following words and symbols mark special messages
throughout this document:
WARNING: indicates that failure to follow the directions could
cause bodily harm or loss of life.
CAUTION: indicates that failure to follow the directions could
result in damage to equipment or loss of information.
CAUTION
WARNING

Trademarks
Service Provider
PC, workstation,
terminal, ...
Disclaimer
9/ 238
3EC 17059 ABAA TCZZA Ed. 01
The following trademarks are used in this document:
Speed Touchis a trademark of the Alcatel Company
Netscapeand Netscape Navigatorare registered
trademarks of Netscape Communications Corporation
Windowsand Internet Explorerare trademarks of
Microsoft Corporation
Appleand MacOS are registered trademarks of Apple
Computer Inc.
UNIXis a registered trademark of UNIX System
Laboratories, Inc.
Ethernetis a trademark of Xerox Corporation.
Other products may be trademarks or registered trademarks of
their respective manufacturers.
For readability, the term Service Provider (SP) will be used to
designate all organizations which provide either DSL connectivity,
Internet access or Corporate access, for example an Internet
Service Provider (ISP).
For readability, PC will refer to all involved computer devices
which are able to interact with the STPro, i.e. Personal
Computer (PC), Macintosh computer, workstation, (remote)
terminal, etc.
All examples throughout this document refer to :
Net 10" IP addresses for local network configurations
VPI 0, or VPI 8 to identify the Virtual Path (VP) on the DSL line.
However, your SP might prefer other values.

User's Guide updates
10 / 238 3EC 17059 ABAA TCZZA Ed. 01
Due to the continuous evolution of the Alcatel DSL technology,
existing products are regularly upgraded. Alcatel documentation
changes accordingly.
For more information on the newest technological changes and
documents, please consult the Alcatel web site at following
Uniform Resource Locator (URL):
http://www.alcatel.com
http://www.alcateldsl.com

Aim of this Quick Guide
In this chapter
1 Speed Touch Quick Guide
11 / 238
3EC 17059 ABAA TCZZA Ed. 01
1 Speed Touch Quick Guide
Use this chapter to quickly connect your STPro to the Internet.
Topic See
Get Acquainted with your STPro 1.1
STPro Installation 1.2

Delivery chec
k
Damaged or missing
items
Other materials
1 Speed Touch Quick Guide
12 / 238 3EC 17059 ABAA TCZZA Ed. 01
1.1 Get Acquainted with your Speed Touch
Check your STPro package for the following items:
The Alcatel Speed TouchPro
1 Power supply adapter with 2m (6.56ft.) connecting cable
2m Cat.5 straightthrough Ethernet/ATMF cable (RJ45/RJ45)
2m DSL cable (RJ11/RJ11, RJ14/RJ14)
This User's Guide, either in hard copy format or on CDrom.
In the event of damaged or missing items, contact your local
product dealer for further instructions.
Your STPro shipping carton may also include release notes, safety
and conformity declarations, and other materials.

Your STPro
ADSL/POTS and
ADSL/ISDN
STPro models
1 Speed Touch Quick Guide
13 / 238
3EC 17059 ABAA TCZZA Ed. 01
Your STPro is presented in a slim line box:
For a detailed information and a LED description, refer to
appendix B.
Three STPro variants exist:
The ADSL/POTS STPro variant
The ADSL/ISDN (ETSI) STPro variant
The ADSL/ISDN (ETSI/ITU) STPro variant.
Three STPro models can be identified:
The single 10BaseT Ethernet port STPro model
The dual port STPro model with both 10BaseT Ethernet port
and ATM Forum  25.6 Mbps (ATMF25.6) port
The integrated10BaseT four port Ethernet hub STPro model.
To determine your model, refer to appendix B.

Identify your variant
1 Speed Touch Quick Guide
14 / 238 3EC 17059 ABAA TCZZA Ed. 01
Use only the STPro variant which is appropriate for the DSL
service delivered to your local premises.
Identify your STPro via the marking label on the bottom:
MODEL NUMBER:
Q A
CPYYWWNNNNN
ALCATEL SPEED TOUCH Pro
Ethernet ADSL Router for POTS
3EC18604XXXXxx
In the figure above, an example is provided of the marking label
for an ADSL/POTS STPro.
Note: For ADSL/ISDN variants, the description POTS is replaced by ISDN.
The NorthAmerican market uses exclusively ADSL/POTS models.
The marking label is similar to the example below:
MODEL NUMBER:
Q A
CP992300XXX AA01
3EC 18204BC
ÁÁ
ÁÁ
US
CR
LISTED
I . T . E . E168438
PARTOF A SYSTEM THAT IS COVERED IN WHOLE OR IN
5,951,660.6,044,151.6,072,810.6,088,386.6,105,084
PART BYONE OR MORE OF THE FOLLOWING U.S. PATENTS:
5,636,253.5,633,817.5,657,355.5,903,612.5,867,528
FCC rules Part 15 and Part 68
FOR HOME OR OFFICE USE
FC
CFCC ID: 6VUBEL–35680–DL–N
REN:<0.1
Made in: Country
Speed Touch Pro NT Tested to Comply with

Aim of this section
In this section
1 Speed Touch Quick Guide
15 / 238
3EC 17059 ABAA TCZZA Ed. 01
1.2 Speed Touch Installation
Execution of the steps in this section will bring you on the Internet
in no time.
Topic See
What you Need 1.2.1
STPro Wiring 1.2.2
Check your SP's Service Offerings 1.2.3
Configure your STPro (If Necessary) 1.2.4
Surf the Internet 1.2.5
Detailed STPro Information 1.2.6

DSL service
Local networking
Accessing the STPro
1 Speed Touch Quick Guide
16 / 238 3EC 17059 ABAA TCZZA Ed. 01
1.2.1 What you Need
Depending on the STPro variant you purchased, the following DSL
service must be available at your local premisses:
ADSL/POTS
ADSL service must be enabled on your POTS telephone line.
ADSL/ISDN
ADSL service must be enabled on your ISDN telephone line.
As both telephone and ADSL service are simultaneously available
from the same copper pair, you need a central splitter, or
distributed filters for decoupling ADSL and telephone signals.
Contact your SP for more information.
To use the Ethernet port(s) you need at least:
One PC with an Ethernet 10BaseT PCNetwork Interface
Card (NIC) installed.
For local networking, a 10BaseT hub (if needed) and the
necessary connection cables.
To use the (optional) ATMF25.6 port you need:
A PC with an ATMF25.6 PCNIC installed.
For ATM networking, a workgroup ATM switch.
For local configuration via HTTP/HTML, you need:
A TCP/IP protocol suite
A Web browser.
For native Command Line Interface (CLI) you need:
A serial cable
An ASCII terminal (VT100), or a PC with ASCII terminal
emulation.

You must wire
Ethernet port(s)
(10BaseT)
Optional ATMF25.6
port (ATMF25)
DSL port (Line)
Power port (DC)
1 Speed Touch Quick Guide
17 / 238
3EC 17059 ABAA TCZZA Ed. 01
1.2.2 STPro Wiring
The Ethernet Port(s) (10BaseT)
The Optional ATMF25.6 Port (ATMF25)
The DSL Port (Line)
The Power Port (DC).
Use the included LAN cable to wire your PC's Ethernet port to
STPro's Ethernet interface.
Refer to section 2.2 for more information.
Use the included LAN cable to wire your PC's ATMF25.6 port to
the STPro's ATMF25.6 port.
Refer to section 2.3 for more information.
Use the included DSL cable to wire the STPro's Line port to your
DSL wall outlet.
Refer to section 3.2 for more information.
Firstly check whether the included mains adapter suits the local
power specifications. If you are not sure of the regional power
conditions, check the adapter's specifications in section B.5, and
your local power company.
Plug the adapter's coaxial jack into the STPro's receptacle marked
'DC'.
Refer to section 3.3 for more information.

Check your wiring
Turn on your STPro
1 Speed Touch Quick Guide
18 / 238 3EC 17059 ABAA TCZZA Ed. 01
Once all connections are made, the result should look similar as
below:
Once all previous steps are completed, turn on your STPro.
The STPro is ready for service as soon as the startup procedures
are completed, the Power On Self Test (POST) is passed and both
Power/Alarm and Line Sync LEDs on the front panel are constantly
lit green.
Refer to section B.2 for more information.

Service offering
Selection criteria
Default STPro VPI/VCI
settings
1 Speed Touch Quick Guide
19 / 238
3EC 17059 ABAA TCZZA Ed. 01
1.2.3 Check your Service Provider's Offering
The SP provides at least the following information:
The VPI/VCI of the Virtual Channel (VC) to use on the DSL
line
The Packet Service supported on this VC
The Encapsulation Method (if different from the Packet
Service's default encapsulation).
Example:
VPI/VCI = 0/35
Packet Service = Transparent Bridging
Encapsulation Method : Bridge default, i.e. LLC/SNAP
Your STPro supports multiple simultaneous VCs on the DSL line. If
your SP exploits this capability, he will provide this information per
VC.
For more information on the criteria to prefer one Packet Service
over the other, see chapter 5.
The VPI/VCI value of the default configured VCs are listed in
appendix C.
In the event that the provided VPI/VCI differ with the STPro
defaults, you can change VC settings via the STPro pages.
See section 11.3 for more information.

STPro access
STPro Configuration
1 Speed Touch Quick Guide
20 / 238 3EC 17059 ABAA TCZZA Ed. 01
1.2.4 Configure your STPro (If Necessary)
In most cases your STPro provides instant Internet connectivity as
it features well chosen defaults
In exceptional cases additional or advanced configurations are
desired, the STPro offers various access methods:
Its web interface (See chapter 17)
A Telnet CLI session (See subsection 18.1.1)
A Serial CLI session (See subsection 18.1.2).
Configure the STPro via its web interface.
Most STPro topics have a dedicated page, e.g. for Bridging,
DHCP, DNS, etc. Context related Help pages provide detailed
information.
For profound configurations use the Command Line Interface
(CLI).