ALCYON MINIKO User manual

www.alcyon.com.auwww.alcyon.com.au
MINIKO Ultrasonic
Aroma Diffuser
1. Do not lean diffuser during operation.
2. Unplug from mains power when filling or cleaning.
3. Do not empty water from the side which the air vent is located.
4. This appliance is not intended for use by children.
5. If the diffuser is accidently knocked over during operation,
water may enter the internal space. If so, please unplug the
diffuser, empty any remaining water and allow to dry for 3 days.
If any issues arise please contact your local retailer.
PRODUCT WARNING

www.alcyon.com.auwww.alcyon.com.au
Function
Specifications
Diffuser Setup
Maintenance
Troubleshooting
Warranty
FUNCTIONTABLE OF CONTENTS:
With an innovative and unique design, the MINIKO Ultrasonic
Aroma Diffuser combines the DNA of both oriental and
western cultures to bring you this fashionable diffuser.
Utilising the instantaneous benefits of ultrasonic vibrations,
MINIKO works silently in the background to break down your
fragrance infused water into a microscopic mist that easily
dissipates into the atmosphere. Leaving your mind, body and
soul at peace.

www.alcyon.com.auwww.alcyon.com.au
SPECIFICATIONS
Product Name:
Voltage:
Power:
Water Capacity:
Mist Output:
Duration:
LED Effect:
MINIKO Aroma Diffuser
DC 5 v
5 w
120 ml
25 ml/h
4 hrs [approx.]
6 hrs intermittent mode
Colour Morphing
+ Selectable
+ High / Low Effect
First
Second
Third
Fourth
On with 3 hours timer o
On
Intermitten On (30 sec on/30 sec o)
O
Colour Morphing
Selected Colour
High / Low Eect
O
Mist Buon
Diffuser Operaon
Night-light Effect
Power Cord
Upper Lid
DC Socket
On/O Switch
Light
Switch
Air Inlet
Water Outlet
Drainage
Side
Air
Intake
Water
Tank
Base

www.alcyon.com.auwww.alcyon.com.au
Place diffuser on a flat and even surface, clear of any loose or
foreign objects.
Fill water tank to max level line - 120ml.
Add up to 2-3 drops of essential or fragranced oils.
Replace cover & connect power.
Press the Mist Button on base unit to activate.
Press the Light Button for desired light effect.
1.
2.
3.
4.
5.
6.
DIFFUSER SETUP
Lift & remove
cover from base
Replace cover
on base unit
Fill with water up
to max level line
Connect Power
Cord
Add 2-3 drops of
your favourite oil
Press Mist Button
to turn on

www.alcyon.com.auwww.alcyon.com.au ULTRASO
To keep your diuser in great working order, we
recommend that you clean once a week.
Turn off diffuser and unplug from power.
Remove cover.
Empty any remaining water from tank.
Wash with a 50/50 mix of vinegar and warm water.
Clean water tank and around ultrasonic pad with a clean,
soft-cotton tip.
Replace cover and clean exterior with clean damp cloth.
1.
2.
3.
4.
5.
6.
MAINTENANCE
We recommend that if not in use for a prolonged period, please remove any standing water
For further Diffuser Maintenance, please visit: www.alcyon.com.au
Unplug diffuser
from mains power
Wash with the
water/vinegar mix
Lightly wipe internals
with clean cloth
Replace cover and
wipe exterior
Lift & remove
cover
Empty any
remaining water
Vinegar
Water

www.alcyon.com.auwww.alcyon.com.au
Too much water (50ml+)
Reseat cover
Tip out excess water
Fill tank with waterInsufficient water
Power not connected
TROUBLESHOOTING WARRANTY CARD
Symptom
NO MIST
Possible Cause Soluon
The mist outlet blocked by water
droplets or oil build-up
Plug in power adaptor and press
mist buon to acvate
Clean outlet vent coon p
Poor performance due to dirty Clean ultrasonic pad
Cover not seated or sealed
properly against base unit
All Alcyon Ultrasonic Diffusers are covered by a limited one year warranty
from date of purchase.
Date of purchase: ____ / ____ / ____
(please keep your receipt with Warranty Card as Proof of Purchase)
Should you be experiencing any issues with your diffusers, please visit
www.alcyon.com.au or call 1300 882 332.
(please have your diffuser on hand when calling)
Terms and Condions:
- A dated receipt is required as Proof of Purchase for warranty purposes.
- This warranty is for operaonal faults only, and does not cover issues such as breakages or faults arising
from misuse.
- Any returned items from customers to Alcyon will be at the consumer’s expense and must be accompanied
with a RA (Return Authorisaon) number issued by Alcyon. Unless a prior arrangement has been made.
- Any goods received without a RA number will not be accepted and returned to the sender.
- The determinaon of faults is at the discreon of Alcyon Australia, with the item to be either repaired or
replaced.
- Return shipping from Alcyon to the customer is to be at Alcyon’s expense.
Alcyon Australia
PO Box 50
LINFIELD NSW 2070
1300 882 332
[email protected]
www.alcyon.com.au