Alde Compact 3030 User manual

Quick guide for control panel
to Alde Compact 3030

22.0ºC 22.0ºC 18.5ºC 14ºC 14ºC
Status screen, main menu
for one temperature zone
Status screen, main menu
for two temperature zones
On-/O-button
Main switch for boiler.
Green LED indicates that the panel/boiler is on. If
it changes to red it indicates that there is an error
message.
MENU-button
Button to activate the settings menu, or return to the
status screen.
Indoor temperature
Indoor temperature shows the current temperature
and whether the circulation pump is active. Tap the
icon to change the desired temperature.
Outdoor temperature*
If an outdoor sensor is installed, the current outdoor
temperature is displayed.
Examples of submenus.
Tap the respective symbol on the status screen to reach its submenu.
Energy
Shows the energy source used (gas or 230 V). The
flame turns red when gas is in use, and the flash turns
yellow when electricity is in use. Tap the icon to select
and prioritise energy source, and to set load monitor*
and high altitude mode.
Hot water
Indicates whether hot water production is on, “boost”
or turned o. Press the respective controls to start/
switch o or increase hot water production. The ther-
mometer fills up entirely when the hot water reaches
boost temperature.
Hot water on (normal operation).
Hot water boost (prioritised hot water production
for 30 minutes).
Hot water ignore (hot water will only be produced
as a by-product of central heating).

22.0ºC 14ºC
NOTE!
Functions marked with * are accessories.
Status screen, symbol menu
Operating messages
Displayed if temporary service interruption occurs.
Information
Flashes when there is an information message.
Can e.g. be that it is time to renew the air cushion in
the boiler or that the boiler makes a new start attempt.
230 V
Shows when 230 V is connected to the boiler.
Day Mode
Appears when the feature is on and turns green when
it is active, ie within the set time interval.
Night Mode
Appears when the feature is on and turns green when
it is active, ie within the set time interval.
LPG bottle available/empty*
Appears if a Truma DuoControl is connected to your
Alde Heating System.
Black bottle= Gas available in the first bottle.
Red bottle= First bottle empty. The DuoControl has
switched to the second bottle.
Tap the respective symbol on the status screen to go directly to its menu. These can also be reached via the menu button at the
bottom right. The path via the menu button is described in detail on the next page.
Examples of menus.
Defroster EisEx*
Appears if EisEx is turned on and turns green when
active.
Engine pre-heat*
Shown if the engine heater is installed and turned on,
and turns green when active.
Anti-bacteria
The boiler’s automatic bacterial elimination setting is
running.
High altitude mode
Flashes if the high altitude mode is active. Used in
heat production with LPG at altitudes above 1000 m.
Switch o the function when the vehicle is back below
1000 m.
Alde AquaClear UV-C*
Appears when the fresh water pump is running and
that the water filter works.

Alde International Systems AB
Box 11066 • 291 11 Färlöv • Sweden
Tel: [phone]
[email protected] • www.alde.se
The Settings menu
Night Mode
An intelligent function for optimal comfort around the
clock, all year round that automatically changes select-
ed functions during the night. Choose which days and
between which times Night Mode should be activated.
You can choose to activate these functions:
- Desired night temperature.
- 1-zone: Change temp sensor to bed during the night*.
- 2-zone: Change temp sensor for AC to bed during the
night*.
- Underfloor heating* on or o.
- Hot water demand on or o.
- AC* should run extra quietly.
- The control panel switches to a dark screen to avoid it
”lighting up” your vehicle during the night.
Day Mode
Automatically changes selected functions during the
day. Choose which days and between which times Day
Mode should be activated.
You can choose to activate these functions:
- Desired day temperature.
- Underfloor heating* on or o.
- Hot water demand on or o.
AC*
If you have a Truma AC that is connected to the heating
system, it is possible to control the AC from the control
panel. This function makes it possible to have a fully
automatic climate control where the heating system
and the AC work together. With an outdoor sensor
fitted, comfort is even higher and provides a smoother
transition between heating and cooling.
Underfloor heating*
Turn the underfloor heating on or o. Select continu-
ous operation of the underfloor heating by activating
“Continuous”.
Engine pre-heat*
Heat the engine in the motorhome using the Alde heat-
ing system via a heat exchanger and circulation pump.
Start or turn o the function, select the start time and
the engine heating duration.
Pump
Choose whether the circulation pump on the boiler
should run automatically or continuously. If a circulation
pump with PWM control is mounted, the speed of the
pump can be controlled in five steps.
EisEx*, defroster for gas regulator
Prevents ice formation in the regulator during winter.
Select on or o, and select whether EisEx should auto-
matically turn on when it is cold. Automatic switch-on
requires an outdoor sensor to be installed.
Delayed start, automatic boiler start
Start or turn o the feature, select start and end time.
Set Delayed start and turn o the boiler on On /O
button. The boiler then starts according to set times.
Sensor calibration
If the temperature that is displayed in the panel does
not correspond to the actual temperature, it can be
adjusted by ±5 °C in the panel. Also applies to outdoor
temperature sensor.
Display
Select panel brightness: Low, Medium, or High. You
can also choose whether the status screen should be
Normal, Inverted, or Dark. If Dark is selected, the panel
will go dark after 30 seconds and will light up again if
touched.
Sound
Start or turn o button and warning/notification
sounds.
Language
Change the language in the Control Panel menus;
available languages are: English, German and French.
Service
Displays values from the heating system; these are
updated continuously and describe the current status of
the boiler.
System configuration
Here, you will find all accessories or functions that can
be connected to the Alde Heating System; tick the
features that are installed in the heating system so they
can be controlled from the control panel.
Reset
Resets the panel to factory setting. The accessories/
features selected under System Configuration are not
aected.
NOTE!
Functions marked with * are accessories.
For more detailed information, see the operating
instructions.
Press the MENU button to access the setting menus. To change menu, click here.
© Alde International Systems AB. 2022.03. 1500 ex. Errors and omissions excepted.
Alde International (UK) Ltd
Huxley Close • Park Farm South • Wellingborough
Northants• NN8 6AB • Great Britain
Tel: [phone]
[e-mail] • www.alde.co.uk