ALDI OL 250-L-17 User manual

User Manual
ID: #05007
m
y
h
a
n
s
e
c
o
n
t
r
o
l
.
c
o
m
M
A
N
U
A
L
D
E
V
E
L
O
P
E
D
I
N
G
E
R
M
A
N
Y
User-friendly
Manual
A4 LAMINATOR

Dok./Rev.-Nr. 195527_20170811
Overview .............................................................................3
Use........................................................................................4
Package contents / device parts.........................................6
General information............................................................ 7
Reading and storing the user manual ..................................7
Explanation of symbols ...........................................................7
Safety ...................................................................................8
Proper use................................................................................. 8
Safety instructions................................................................... 8
First use...............................................................................12
Checking the laminator and package contents ................ 12
Setting up the laminator ....................................................... 12
Activating / deactivating the laminator .............................. 12
Operation........................................................................... 13
Laminating............................................................................... 13
Removing a jammed laminating pouch ............................. 14
Cleaning............................................................................. 14
Cleaning the heating rollers ................................................. 15
Storage .............................................................................. 15
Technical data ................................................................... 16
Disposal.............................................................................. 16
Disposing of the packaging ..................................................16
Disposing of old devices ........................................................16
Warranty details.................................................................17
Repair and refurbished goods or parts notice................ 18
Contents

3
A
1
5
6
2 3 4

4
B
4 23

5

6
Package contents / device parts
1Ready indicator
2Laminating pouch infeed slot
3ON /OFF switch
4ABS switch (antiblocking system)
5Laminating pouch output slot
6Laminating pouch (not included)

General information
7
General information
Reading and storing the user manual
This user manual accompanies this A4 laminator (hereafter referred to
as “laminator”). It contains important information on setup and
handling.
Before using the laminator, read the user manual carefully. This
particularly applies to the safety notes. Failure to do so may result in personal injury
or damage to the laminator.
Store the user manual for future use. Make sure to include this user manual when
passing the laminator on to third parties. The user manual can also be downloaded
from our website as a PDF file at www.monolith-support.com.
Explanation of symbols
The following symbols and signal words are used in this user manual, on the
laminator or on the packaging.
WARNING!
This signal symbol/word designates a hazard
with moderate risk, which may result in death or
severe injury if not avoided.
NOTICE! This signal word warns of possible damage to
property.
This symbol provides you with useful additional information on
handling and use.
The RCM Mark (Regulatory Compliance Mark) indicates that the
product complies with the relevant guidelines of the ACMA as well as
corresponding government requirements for the safety of electrical
devices.
Read the user manual.
The symbol indicates that the product is of CLASS II (double insulated)
construction. It does not require a safety connection to electrical earth
(ground).
Only use the laminator in indoor areas.

Safety
8
Safety
Proper use
The laminator is only designed for laminating. It is only intended for private use and
not suitable for commercial purposes.
Only use the laminator as described in this user manual. Any other use is deemed
improper and may result in damage to property or even personal injury. The
laminator is not a children’s toy.
The manufacturer or vendor accepts no liability for damage caused by improper or
incorrect use.
Safety instructions
WARNING!
Risk of electric shock!
A faulty electrical installation, excessive line voltage or incorrect
operation may result in an electric shock.
− Only connect the laminator in indoor areas to a properly
installed AC 240V socket with a protective conductor.
− Plug adapters or extension cords must also be equipped with
a protective conductor.
− Only connect the laminator to an easily accessible socket so
that you can quickly disconnect it from the mains in case of a
failure.
− Do not operate the laminator if it is visibly damaged or if the
mains cord or mains plug is defective.
− If the mains cord of the laminator is damaged, the
manufacturer, its customer service team or a person with
technical qualifications must replace it.
− Do not open the housing; instead, have a qualified professional
perform the repairs. Contact the service address provided on
the warranty card. Liability and warranty claims are waived
in the event of repairs or conversions performed by the user,
improper connection of the device or incorrect operation.

Safety
9
− Only parts that comply with the original device data may be
used for repairs. Electrical and mechanical parts, which are
essential for providing protection against sources of danger,
are located in this laminator.
− Do not operate the laminator with an external timer or
separate telecontrol system.
− Do not immerse the laminator or the mains cord or mains plug
in water or other liquids.
− Never touch the mains plug with damp hands.
− Do not perform any other work (such as cleaning) on the
laminator while it is operating.
− Never pull the mains plug out of the socket by the mains cord;
instead, always do so by taking hold of the mains plug.
− Never use the mains cord as a carrying handle.
− Keep the laminator, mains plug and mains cord away from
open flames and hot surfaces.
− Lay the mains cord so that it does not pose a tripping hazard.
− Do not kink the mains cord and do not lay it over sharp edges.
− Only use the laminator in indoor areas. Do not use them in wet
rooms or in the rain.
− Never store the laminator so that it is at risk of falling into a
bath tub or washbasin.
− Never reach to retrieve the laminator if it has fallen in water.
In such a case, immediately disconnect the mains plug.
− Make sure that children do not insert any objects into the
laminator.
− Always switch the laminator off and pull the mains plug out of
the socket when you are not using the laminator, cleaning it or
in the event of a fault.

Safety
10
WARNING!
Danger for children and persons with impaired physical,
sensory or mental capacities (e.g. partially disabled persons,
older persons with reduced physical and mental capacities) or
lack of experience and knowledge (e.g. older children).
− This laminator may be used by persons with impaired physical,
sensory or mental capacities or those lacking experience and
knowledge if they are supervised or have been instructed
in how to safely use the laminator and have understood the
risks associated with operating it. Children must not play with
the laminator. Cleaning and user maintenance must not be
performed by children.
− Keep children away from the laminator and connector cable.
− Do not leave the laminator unattended while it is operating
and do not perform any other activities during operation.
− Do not allow children to play with the packaging wrapper.
Children may get caught in it when playing and suffocate.
− Keep the laminator away from pets.
− Clearly advise other users of the risks.
NOTICE!
Risk of damage!
Improper handling of the laminator may damage the laminator.
− Place the laminator on an easily accessible, level, dry, heat-
resistant and sufficiently stable work surface. Do not place the
laminator on the edge of the work surface.
− Avoid the build-up of heat by not placing the laminator
directly up against a wall or under cupboards or similar.
− Protect the laminator from direct sunlight.