ALDI OL 350-L-17 User manual

ID: #07177
m
y
h
a
n
s
e
c
o
n
t
r
o
l
.
c
o
m
C
E
R
T
I
F
I
E
D
User-friendly
Manual
User Manual
Manual del usuario
English........06
Español .......19
13" ADVANCED
THERMAL LAMINATOR
PLASTIFICADORA TÉRMICA AVANZADA
DE 13"

QR codes take you where you want to go
quickly and easily
Whether you require product information, spare parts or accessories,
details on warranties or aftersales services, or if you want to watch a product
demonstration video or 360° product view, our QR codes will take you there
in no time at all.
What is a QR code?
A QR code (QR = Quick Response) is a type of matrix that can be read with a
smartphone camera and that contains a link to a website or contact details, for
example.
Advantage: You do not need to manually enter a website address or contact
details.
How it works
To scan the QR code, all you need is a smartphone with QR code reader soft-
ware and an internet connection. This type of software can be downloaded for
free from your smartphone’s app store.
Try it out now
Just scan the QR code with your smartphone and find out
more about the ALDI product you have purchased.
Your ALDI Service Portal
All details mentioned above can also be found in the
ALDI Service Portal at www.aldi.us.
Depending on your smartphone plan you may be charged for the connection.

Dok./Rev.-Nr. 195180_20170413_US
Contents
Overview .............................................................................4
Use........................................................................................5
Package contents/device parts..........................................6
General information............................................................7
Reading and storing the user manual ..................................7
Explanation of symbols ...........................................................7
Safety...................................................................................8
Proper use................................................................................. 8
Safety notes .............................................................................. 8
First use...............................................................................12
Checking the laminator and product contents.................. 12
Setting up the laminator ....................................................... 12
Activating /deactivating the laminator .............................. 13
Operation........................................................................... 13
Laminating............................................................................... 14
Removing a jammed laminating pouch .............................14
Cleaning............................................................................. 15
Cleaning the heating rollers .................................................16
Storage .............................................................................. 16
Technical data ....................................................................17
Disposal...............................................................................17
Disposing of the packaging .................................................. 17
Disposing of old appliances .................................................. 17

4
A
1
5
6
2 3 4

5
B
4 23

6
Package contents⁄device parts
1Ready indicator
2Laminating pouch infeed slot
3ON/OFF switch
4ABS switch (antiblocking system)
5Laminating pouch output slot
6Laminating pouch (12" × 12" (30.5 × 30.5 cm), 75 mic), 8×

General information
7
General information
Reading and storing the user manual
This user manual accompanies this 13" advanced thermal
laminator (hereafter referred to as “laminator”), and contains
important information on setup and handling.
Before using the laminator, read the user manual carefully. This
particularly applies to the safety instructions. Failure to do so may result in
personal injury or damage to the laminator.
Store the user manual for further use. Make sure to include this user manual
when passing the laminator on to third parties. The user manual can also be
downloaded from our website as a PDF file at www.monolith-support.com.
Explanation of symbols
The following symbols and signal words are used in this user manual, on the
laminator or on the packaging.
WARNING! This signal symbol/word designates a hazard
with moderate risk, which may result in
death or severe injury if not avoided.
NOTICE! This signal word warns of possible damage
to property.
This symbol provides you with useful additional information on
handling and use.
If a product carries this mark, it means UL found that
representative product samples met UL’s safety requirements.
Read the user manual.
The symbol indicates that the product is of CLASS II (double
insulated) construction. It does not require a safety connection
to electrical earth (ground) and contains no touchable metallic
parts, which could conduct voltage in the event of a fault.
Only use the laminator in indoor areas.

Safety
8
Safety
Proper use
The laminator is only designed for laminating. It is only intended for private use
and not suitable for commercial purposes.
Only use the laminator as described in this user manual. Using it in any other
way is deemed improper and may result in damage to property or even
personal injury. The laminator is not a children’s toy.
The manufacturer or vendor cannot be held liable for damages incurred
through improper or incorrect use.
Safety notes
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed including the following. Read all
instructions.
WARNING!
Risk of electric shock!
A faulty electrical installation, excessive line voltage or incorrect
operation may result in an electric shock.
− Only connect the laminator in indoor areas and only
to a properly installed AC 120V socket with a protective
conductor.
− Only connect the laminator to an easily accessible socket-
outlet near the equipment so that you can quickly
disconnect it from the grid in case of a failure.
− Do not operate the laminator if it is visibly damaged or if
the power cable or power plug is defective.
− If the power cable of the laminator is damaged, the
manufacturer, its customer service team or a person with
technical qualifications must replace it.
− Do not open the housing; instead, have a qualified
professional perform repairs. To do so, contact the service

Safety
9
address indicated on the warranty card. Liability and
warranty claims are waived in the event of repairs or
conversions performed by the user, improper connection
of the device or incorrect operation.
− Only parts that comply with the original device data may
be used for repairs. Electrical and mechanical parts, which
are essential for providing protection against sources of
danger, are located in this laminator.
− Do not operate the laminator with an external timer or
separate telecontrol system.
− Do not immerse the laminator or the power cable or
power plug in water or other liquids.
− Never touch the power plug with damp hands.
− Do not perform any other work (such as cleaning) on the
laminator while it is operating.
− Never pull the power plug out of the socket by the power
cable; instead, always do so by taking hold of the power
plug.
− Never use the power cable as a carrying strap.
− Keep the laminator, power plug and power cable away
from open flames and hot surfaces.
− Lay the power cable so that it does not pose a tripping
hazard.
− Do not kink the power cable and do not lay it over sharp
edges.
− Only use the laminator in indoor areas. Do not use it in wet
rooms or in the rain.
− Never store the laminator so that it is at risk of falling into a
bath tub or washbasin.
− Never reach to retrieve the laminator if it has fallen in
water. In such a case, immediately disconnect the power
plug.
− Make sure that children do not insert any objects into the
laminator.

Safety
10
− Always switch the laminator off and pull the power plug
out of the socket when you are not using the laminator,
cleaning it or in the event of a fault.
− Do not modify the plug in any way. The laminator has
a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician.
WARNING!
Danger for children and persons with impaired physical,
sensory or mental capacities (e.g. partially disabled
persons, older persons with reduced physical and mental
capacities) or lack of experience and knowledge (e.g.
older children).
− This laminator may be used by children from the age of
eight as well as persons with impaired physical, sensory or
mental capacities or those lacking experience and know-
ledge if they are supervised or have been instructed in
how to safely use the laminator and have understood the
risks associated with operating it. Children must not play
with the laminator. Cleaning and user maintenance must
not be performed by unsupervised children.
− Keep children under eight years of age away from the
laminator and connector cable.
− Do not leave the laminator unattended while it is operating
and do not perform any other activities during operation.
− Make sure that children do not play with the packaging
wrapper. Children may get caught in it when playing and
suffocate.
− Never fill the laminator with liquid.
− Keep the laminator away from pets.
− Clearly advise other users of the risks.

Safety
11
NOTICE!
Risk of damage!
Improper handling of the laminator may damage the
laminator.
− Place the laminator on an easily accessible, level, dry,
heat-resistant and sufficiently stable work surface. Do not
place the laminator on the edge of the work surface.
− Avoid the build-up of heat by not placing the laminator
directly up against a wall or under cupboards or similar.
− Protect the laminator from direct sunlight.
− Never place the laminator on or near hot surfaces
(e.g. stovetops, heaters etc.).
− Ensure that the power cable does not come into contact
with hot parts.
− Never expose the laminator to high temperatures
(heaters etc.) or to the effects of the weather (rain etc.).
− Never laminate damp documents or organic objects
(e.g. flowers, leaves etc.).
− Do not cut the laminating pouches into pieces before
laminating and do not in any case cut off the sealed edges
from the laminating sheets.
− Stop using the laminator if its plastic parts exhibit cracks or
breaks or are deformed. Only replace damaged parts with
corresponding original spare parts.
− Only laminate at room temperature (approx. 50–77°F/
10–25°C).
− Never insert metallic objects (e.g. paper clips, staples etc.)
or objects other thanlaminating pouches which are
intended for this laminator into the laminating pouch
infeed slot.

First use
12
− The laminator has vents. Never cover them with other
objects such as magazines, blankets or similar.
− Never attempt to clean the laminator by immersing
it in water and do not use a steam cleaner to clean it.
Otherwise, you could damage the laminator.
SAVE THESE INSTRUCTIONS
Keep the user manual for future reference.
First use
Checking the laminator and product contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointy object, you may quickly damage the
laminator.
− Be very careful when opening the packaging.
1. Take the laminator out of the packaging.
2. Check whether the laminator or the individual parts exhibit damage. If
this is the case, do not use the laminator. Contact the manufacturer at the
service address specified on the warranty card.
3. Check to make sure that the delivery is complete (see fig. A).
Setting up the laminator
1. Position the laminator so that there is enough space to insert a laminating
pouch 6. Do not position the laminator directly in front of a wall or other
objects.
2. Connect the power plug to a properly installed socket with a protective
conductor (AC 120V, 60 Hz = house connection).

Operation
13
Activating/deactivating the laminator
1. Move the ON/OFF switch 3to “ON” (―) to switch the laminator on.
The ready indicator 1will turn from black to red once the
laminator has reached the correct temperature for lamination.
The preheating time may vary depending on the ambient
temperature and air humidity.
2. Move the ON/OFF switch to “OFF” ( ) to switch the laminator off.
Operation
WARNING!
Risk of injury!
Handling the laminator improperly may result in injury.
− If an object (sleeves, tie etc.) is unintentionally taken into
the laminating pouch infeed slot, immediately disconnect
the power plug.
NOTICE!
Risk of damage!
Improper handling of the laminator may lead to damage to the
laminator or documents.
− Do not in any case laminate documents with a treated
surface (e.g. fax or thermopaper, Polaroid pictures etc.)
and papers with surfaces that may be altered through
heat (tickets, ultrasonic scans etc.).
− Only use one laminating pouch per lamination, as
laminating pouches may stick tightly together.
− Do not leave any laminating pouches in or next to the
laminator after lamination.
When using the laminator, a slight odour may be produced.
Ensure there is sufficient ventilation in the room, e.g. by opening
windows.

Operation
14
Laminating
1. Move the ON/OFF switch 3to “ON” (―) (see fig. B).
The ready indicator will turn from black to red within the next
1½–2minutes.
2. Once the ready indicator 1is red, place the document between the two
sides of the laminating pouch 6.
Make sure that the document is flush with and aligned as close as possible
to the sealed edge of the laminating pouch.
3. Insert the laminating pouch so that it is centered and with the closed-edge
first into the laminating pouch infeed slot 2on the back of the laminator.
The heating rollers will automatically pull the laminating pouch in and move
it to the laminating pouch output slot 5on the front of the laminator.
Don’t use force to pull out the laminating pouch.
4. Remove the laminating pouch and let it cool off briefly on a flat surface.
− If necessary, you can cut off excessive material after it has
cooled off.
− Repeat the process if the laminating pouch has not
adequately adhered to the document.
5. Move the ON/OFF switch to “OFF” ( ) to switch the laminator off.
Removing a jammed laminating pouch
The laminator is equipped with an antiblocking system. If the laminating pouch
was not inserted straight or it becomes jammed in the laminator, proceed as
follows:
1. Move the ABS switch 4towards the laminating pouch infeed slot 2and
hold it down (see fig. B).
2. Pull the laminating pouch 6out of the laminator.
It is recommended you pull the laminating pouch out in the
direction of its larger end.
You can place the document in a new laminating pouch and laminate it again.

Cleaning
15
Cleaning
WARNING!
Burn hazard!
The laminator will become hot during operation. You may burn
yourself.
− Always let the laminator cool off completely before you
clean it.
NOTICE!
Risk of short circuit!
Water that has penetrated the housing may cause a short
circuit.
− Never submerge the laminator in water.
− Make sure that no water penetrates the housing.
NOTICE!
Risk of damage!
Improper handling of the laminator may result in damage to
the laminator.
− Do not use any aggressive cleaners, brushes with metal
or nylon bristles, sharp or metallic cleaning utensils such
as knives, metal sponges and the like. They could damage
the surfaces.
− Do not in any case place the laminator in the dishwasher.
It would be destroyed as a result.
1. Disconnect the power plug before cleaning.
2. Let the laminator cool off completely.
3. Use a damp cloth to wipe off the laminator. Let all parts dry completely
afterwards.

Storage
16
Cleaning the heating rollers
1. Switch the laminator on by moving the ON / OFF switch 3to “ON” (―).
2. Once the ready indicator 1turns red, fold a sheet of paper and insert it,
folded-edge first, into the laminating pouch infeed slot 2.
3. Keep repeating this process until no more glue deposits cling to the paper.
4. Switch the laminator off by moving the ON/OFF switch to “OFF” ( ).
Storage
NOTICE!
Risk of damage!
Improper storage of the laminator may result in damage to the
laminator.
− Never store the laminator next to a heat source.
− Do not fold or crush the power cable.
− Only stow the laminator if it is dry.
− Always store the laminator in a clean, dry area that it is protected from direct
sunlight and is not accessible for children.
− Use the original packaging for storage.

Technical data
17
Technical data
Model: OL 350-L-17
Product code: 95019
Model color: white/grey mat
Line voltage: AC 120 V~ / 60 Hz
Power consumption: 600 W / 5 A
Protection class: II
Weight: approx. 3.1 lbs (1.4 kg)
Dimensions (W ×D × H): 17.4" × 4.8" × 2.9" (441 mm × 121 mm × 76 mm)
Preheating time: 1½–2min.
Pouch thickness: 3 mil to 5 mil (75 mic to 125 mic)
Operating speed: 15.75" / min. (400mm / min.)
Laminating temperature: approx. 275 °F (135°C)
Maximum film size: up to 11" × 17" (27.9 × 43.2 cm)
Rolling mechanism: 2 rollers
Lamination: hot lamination
Ready indicator: indicator with thermo-transfer technology
ABS function: yes
Technical changes reserved.
Disposal
Disposing of the packaging
− Sort the packaging before you dispose of it. Dispose of paperboard
and cardboard with the recycled paper service and wrappings with the
appropriate collection service.
Disposing of old appliances
− Should the laminator no longer be capable of being used at some point in
time, dispose of it in accordance with the regulations in force in your
city or state.
− Please ensure your recycling information applies to local regulations and
the EPA recommendations (www.epa.gov).

18

Contenido
19
Contenido
Conjunto ................................................................................................4
Uso ........................................................................................................5
Volumen de suministro/piezas del equipo.......................................20
Códigos QR........................................................................................... 21
Generalidades..................................................................................... 22
Leer y guardar este manual del usuario ........................................... 22
Descripción de símbolos...................................................................... 22
Seguridad............................................................................................ 23
Uso apropiado .......................................................................................23
Indicaciones de seguridad..................................................................23
Primera puesta en servicio ................................................................28
Comprobar la plastificadora y el volumen de suministro ..............28
Colocacar la plastificadora ..................................................................28
Encender/ Apagar la plastificadora...................................................28
Manejo.................................................................................................29
Plastificar................................................................................................30
Extraer la funda de plastificar atascada ...........................................30
Limpieza .............................................................................................. 31
Limpiar los rodillos térmicos................................................................ 32
Almacenamiento.................................................................................32
Datos técnicos......................................................................................33
Eliminación..........................................................................................33
Eliminación del embalaje ....................................................................33
Eliminación de equipos en desuso ....................................................33

Volumen de suministro/piezas del equipo
20
Volumen de suministro/piezas del equipo
1Indicador Ready
2Entrada de las fundas de plastificar
3Interruptor de encendido/apagado
4Interruptor ABS (sistema antibloqueo)
5Salida de las fundas de plastificar
6Funda de plastificar (12" × 12" (30.5 × 30.5 cm), 75 mic), 8×