ALDI Adventuridge FLX-CT-01 User manual

Produced in China for:
ALDI STORES LTD. PO BOX 26,
ATHERSTONE
WARWICKSHIRE, CV9 2SH.
ALDI STORES (IRELAND) LTD.
PO BOX 726, NAAS, CO. KILDARE.
visit us at www.aldi.com
YEARS
WARRANTY
3User Manual
Spend a little Live a lot
ALUMINIUM CAMPING
TABLE
GB IRE
General information
Reading and storing the
user manual
Before using the arti-
cle, read the user man-
ual carefully. This
particularly applies for
the safety notes. Fail-
ure to heed this user manual may
result in severe injury or damage to
the aluminium camping table. For
improved readability, the alumini-
um camping table will be referred
to only as the “table” below.
The user manual is based on the
standards and rules in force in the
European Union. When abroad, you
must also observe country-specific
guidelines and laws!
Store the user manual. If you pass
the table on to third parties, please
be absolutely sure to include this
user manual.
Explanation of symbols
WARNING!
This signal symbol/word desig-
nates a hazard with moderate
degree of risk which may lead
to death or severe injury if not
avoided.
CAUTION!
This signal symbol/word desig-
nates a hazard with low risk that, if
not avoided, may result in minor or
moderate injury.
NOTICE!
This signal word warns against po-
tential damages to property.
geprüfte
Sicherheit
The certified
safety seal (GS
mark) confirms
that the
aluminium camping table meets
the requirements of the German
Product Safety Act (ProdSG).
Safety
Proper use
The table is only designed for
camping. The table is not a piece of
seating furniture and is also not to
be used to secure sun shades. The
table is only intended for private
use and is not suitable for com-
mercial purposes. The table is not a
children’s toy.
Do not exceed the table’s load
bearing capacity of 50kg.
Only use the table as described in
this user manual. Any other use is
deemed improper and may result
in damage to property or even per-
sonal injury.
The manufacturer or vendor
accepts no liability for damage
caused by improper or incorrect
use.
Safety notes
WARNING!
Danger of suffocation!
When playing, children may
slip the packaging wrapper or
the packaging bag over their
head and suffocate.
− Keep the packaging material
as well as the storage bag
away from children.
WARNING!
Risk of injury!
The table is not suitable for
standing on, sitting or use as
a climbing aid. You could fall
down and seriously injure
yourself.
− Do not climb, stand or sit on
the table.
CAUTION!
Risk of injury!
If the table is damaged or is
not set up correctly, if you sup-
port yourself on it, load only
one side, excessively load the
table or use it as a sun shade
frame, the table could tip over.
You could injure yourself as a
result.
− Do not mount a sun shade on
the table.
− Do not support yourself on
the table.
− Do not load only one side of
the table.
Disposal
Disposing of the
packaging
Dispose of the
packaging sepa-
rated into single
type materials.
Dispose of card-
board and carton
as waste paper
and foils via the
recyclable ma-
terial collection
service.
Disposing of the table
− Dispose of the table in accord-
ance with the applicable
disposal regulations for your
country.
Technical data
Type: FLX-CT-01
Article number: 93297
Weight: approx. 3 kg
Maximum load-bearing capacity: 50 kg
Dimensions (W x D x H): approx. 70 x 70 x 70 cm
Material: Aluminium
As our products undergo continual development and improvement, tech-
nical changes and changes to the product design are possible.
This user manual can also be downloaded as a PDF file from our home-
page www.flexxtrade.de.
QR-Code –
Try it out now
Just scan the QR code with your
smartphone and find out more
about the Aldi product you have
purchased.
Depending on your tariff plan you
may be charged for the connection.
MODEL: FLX-CT-01 PRODUCT CODE.: 93297 05/2016
GB IRE 00800/78747874
AFTER SALES
SUPPORT
MODEL: FLX-CT-01 PRODUCT CODE.: 93297 05/2016
GB IRE 00800/78747874
AFTER SALES
SUPPORT
Great care has gone into the manufacture of this pro-
duct and it should therefore provide you with years of
good service when used properly. In the event of pro-
duct failure within its intended use over the course of
the first 3 years after date of purchase, we will remedy
the problem as quickly as possible once it has been
brought to our attention. In the unlikely event of such
an occurrence, or if you require any information about
the product, please contact us via our helpline sup-
port services, details of which are to be found both in
this manual and on the product itself.
[e-mail]
[e-mail] flexxtrade[email protected]
[e-mail]

EC
A
B D
1
2
4
3
4
3
4
5
6
7
8
2
2
4
− Check to make sure that the
table has been set up proper-
ly before each use.
− Do not exceed the table’s load
bearing capacity of 50kg.
− Do not make any modifica-
tions to the table.
NOTICE!
Risk of damage!
Using the table at extreme ef-
fects of weather or exposing
it to high temperatures could
damage the table.
− Protect the table against
exposure to extreme effects
of weather such as storms,
thunderstorms, severe heat
and cold.
− Stop using the table if it is
damaged.
− Have damaged parts re-
placed with suitable
original spare parts only.
− Keep the table away from
open fire and strong heat
sources.
Checking the
product contents
NOTICE!
Risk of damage!
The table can be damaged if
you open the packaging with
a sharp implement.
− Carefully open the package.
1. Remove all packaging parts.
2. Take the parts out of the pack-
aging and check whether the
individual parts show damage.
If this is the case, do not use the
table. Contact the manufacturer
at the service address specified
on the warranty card.
3. Check to make sure that the de-
livery is complete (see fig. A).
Set-up and dis-
mantling
CAUTION!
Risk of injury!
When setting up the table,
you could injure yourself on
sharp edges or crush your fin-
gers on the frame.
− Do not allow children to set
up or take down the table.
− Do not reach into the
guides.
− Be careful when setting up
and taking down the table.
NOTICE!
Risk of damage!
The rubberised feet may leave
marks on sensitive floors.
− Check whether your floor is
suitable.
Setting up the table
1. Pull the bottom frame 1
apart (see fig.B).
2. Place the two lateral braces 3
on the bottom frame so that
they are level (see fig.C).
3. Push the lateral braces firmly
into the brackets so that the
plastic pins lock into the holes in
the lateral braces.
4. Attach the side parts 4to the
bottom frame so that the
rivets 6on all four corners
are correctly fitted in the
guides 5(see fig.D).
5. Roll the tabletop 2out on the
bottom frame from one lateral
brace to the other.
6. Insert the four pins 7on
both sides of the tabletop in
the holes of the side parts 8
until they audibly lock into
place (see fig.E).
7. You can now use the table.
Taking the table apart
− To take the table apart, reverse
the steps described in the
chapter “Setting up the table”.
Cleaning and storage
NOTICE!
Risk of damage!
Using the wrong cleaners and
cleaning utensils could dam-
age the table.
− Do not use any aggressive
cleaners or sharp or metallic
objects such as knives, hard
scrapers brushes with metal
or nylon bristles or similar.
NOTICE!
Risk of damage!
Incorrectly storing the table
could damage it.
− Let the table dry completely
before storing it and if you
do not use it for a prolonged
period of time.
− Store the table in a dry
area and protect it against
extreme effects of weather
such as storms, thunder-
storms, severe heat and cold.
1. Take the table apart as de-
scribed in the chapter “Taking
the table apart”.
2. Wipe off all parts of the table
with a damp cloth. If necessary,
use a mild cleaner, e.g. de-
greasing detergent.
3. Let all parts dry completely.
4. Store all parts of the table in the
enclosed storage bag.
Assembly/use
Product contents/
device parts
1Bottom frame
2Tabletop
3Lateral brace 2×
4Side parts 2×
5Guide 4×
6
Rivet 4×
7Pin 4×
8Hole in the side parts 4×
MODEL: FLX-CT-01 PRODUCT CODE.: 93297 05/2016
GB IRE 00800/78747874
AFTER SALES
SUPPORT
MODEL: FLX-CT-01 PRODUCT CODE.: 93297 05/2016
GB IRE 00800/78747874
AFTER SALES
SUPPORT flexxtrade[email protected]
[e-mail] [e-mail]
[e-mail]

EC
A
B D
1
2
4
3
4
3
4
5
6
7
8
2
2
4
− Check to make sure that the
table has been set up proper-
ly before each use.
− Do not exceed the table’s load
bearing capacity of 50kg.
− Do not make any modifica-
tions to the table.
NOTICE!
Risk of damage!
Using the table at extreme ef-
fects of weather or exposing
it to high temperatures could
damage the table.
− Protect the table against
exposure to extreme effects
of weather such as storms,
thunderstorms, severe heat
and cold.
− Stop using the table if it is
damaged.
− Have damaged parts re-
placed with suitable
original spare parts only.
− Keep the table away from
open fire and strong heat
sources.
Checking the
product contents
NOTICE!
Risk of damage!
The table can be damaged if
you open the packaging with
a sharp implement.
− Carefully open the package.
1. Remove all packaging parts.
2. Take the parts out of the pack-
aging and check whether the
individual parts show damage.
If this is the case, do not use the
table. Contact the manufacturer
at the service address specified
on the warranty card.
3. Check to make sure that the de-
livery is complete (see fig. A).
Set-up and dis-
mantling
CAUTION!
Risk of injury!
When setting up the table,
you could injure yourself on
sharp edges or crush your fin-
gers on the frame.
− Do not allow children to set
up or take down the table.
− Do not reach into the
guides.
− Be careful when setting up
and taking down the table.
NOTICE!
Risk of damage!
The rubberised feet may leave
marks on sensitive floors.
− Check whether your floor is
suitable.
Setting up the table
1. Pull the bottom frame 1
apart (see fig.B).
2. Place the two lateral braces 3
on the bottom frame so that
they are level (see fig.C).
3. Push the lateral braces firmly
into the brackets so that the
plastic pins lock into the holes in
the lateral braces.
4. Attach the side parts 4to the
bottom frame so that the
rivets 6on all four corners
are correctly fitted in the
guides 5(see fig.D).
5. Roll the tabletop 2out on the
bottom frame from one lateral
brace to the other.
6. Insert the four pins 7on
both sides of the tabletop in
the holes of the side parts 8
until they audibly lock into
place (see fig.E).
7. You can now use the table.
Taking the table apart
− To take the table apart, reverse
the steps described in the
chapter “Setting up the table”.
Cleaning and storage
NOTICE!
Risk of damage!
Using the wrong cleaners and
cleaning utensils could dam-
age the table.
− Do not use any aggressive
cleaners or sharp or metallic
objects such as knives, hard
scrapers brushes with metal
or nylon bristles or similar.
NOTICE!
Risk of damage!
Incorrectly storing the table
could damage it.
− Let the table dry completely
before storing it and if you
do not use it for a prolonged
period of time.
− Store the table in a dry
area and protect it against
extreme effects of weather
such as storms, thunder-
storms, severe heat and cold.
1. Take the table apart as de-
scribed in the chapter “Taking
the table apart”.
2. Wipe off all parts of the table
with a damp cloth. If necessary,
use a mild cleaner, e.g. de-
greasing detergent.
3. Let all parts dry completely.
4. Store all parts of the table in the
enclosed storage bag.
Assembly/use
Product contents/
device parts
1Bottom frame
2Tabletop
3Lateral brace 2×
4Side parts 2×
5Guide 4×
6
Rivet 4×
7Pin 4×
8Hole in the side parts 4×
MODEL: FLX-CT-01 PRODUCT CODE.: 93297 05/2016
GB IRE 00800/78747874
AFTER SALES
SUPPORT
MODEL: FLX-CT-01 PRODUCT CODE.: 93297 05/2016
GB IRE 00800/78747874
AFTER SALES
SUPPORT [e-mail]
[e-mail] flexxtrade[email protected]
[e-mail]

Produced in China for:
ALDI STORES LTD. PO BOX 26,
ATHERSTONE
WARWICKSHIRE, CV9 2SH.
ALDI STORES (IRELAND) LTD.
PO BOX 726, NAAS, CO. KILDARE.
visit us at www.aldi.com
YEARS
WARRANTY
3User Manual
Spend a little Live a lot
ALUMINIUM CAMPING
TABLE
GB IRE
General information
Reading and storing the
user manual
Before using the arti-
cle, read the user man-
ual carefully. This
particularly applies for
the safety notes. Fail-
ure to heed this user manual may
result in severe injury or damage to
the aluminium camping table. For
improved readability, the alumini-
um camping table will be referred
to only as the “table” below.
The user manual is based on the
standards and rules in force in the
European Union. When abroad, you
must also observe country-specific
guidelines and laws!
Store the user manual. If you pass
the table on to third parties, please
be absolutely sure to include this
user manual.
Explanation of symbols
WARNING!
This signal symbol/word desig-
nates a hazard with moderate
degree of risk which may lead
to death or severe injury if not
avoided.
CAUTION!
This signal symbol/word desig-
nates a hazard with low risk that, if
not avoided, may result in minor or
moderate injury.
NOTICE!
This signal word warns against po-
tential damages to property.
geprüfte
Sicherheit
The certified
safety seal (GS
mark) confirms
that the
aluminium camping table meets
the requirements of the German
Product Safety Act (ProdSG).
Safety
Proper use
The table is only designed for
camping. The table is not a piece of
seating furniture and is also not to
be used to secure sun shades. The
table is only intended for private
use and is not suitable for com-
mercial purposes. The table is not a
children’s toy.
Do not exceed the table’s load
bearing capacity of 50kg.
Only use the table as described in
this user manual. Any other use is
deemed improper and may result
in damage to property or even per-
sonal injury.
The manufacturer or vendor
accepts no liability for damage
caused by improper or incorrect
use.
Safety notes
WARNING!
Danger of suffocation!
When playing, children may
slip the packaging wrapper or
the packaging bag over their
head and suffocate.
− Keep the packaging material
as well as the storage bag
away from children.
WARNING!
Risk of injury!
The table is not suitable for
standing on, sitting or use as
a climbing aid. You could fall
down and seriously injure
yourself.
− Do not climb, stand or sit on
the table.
CAUTION!
Risk of injury!
If the table is damaged or is
not set up correctly, if you sup-
port yourself on it, load only
one side, excessively load the
table or use it as a sun shade
frame, the table could tip over.
You could injure yourself as a
result.
− Do not mount a sun shade on
the table.
− Do not support yourself on
the table.
− Do not load only one side of
the table.
Disposal
Disposing of the
packaging
Dispose of the
packaging sepa-
rated into single
type materials.
Dispose of card-
board and carton
as waste paper
and foils via the
recyclable ma-
terial collection
service.
Disposing of the table
− Dispose of the table in accord-
ance with the applicable
disposal regulations for your
country.
Technical data
Type: FLX-CT-01
Article number: 93297
Weight: approx. 3 kg
Maximum load-bearing capacity: 50 kg
Dimensions (W x D x H): approx. 70 x 70 x 70 cm
Material: Aluminium
As our products undergo continual development and improvement, tech-
nical changes and changes to the product design are possible.
This user manual can also be downloaded as a PDF file from our home-
page www.flexxtrade.de.
QR-Code –
Try it out now
Just scan the QR code with your
smartphone and find out more
about the Aldi product you have
purchased.
Depending on your tariff plan you
may be charged for the connection.
MODEL: FLX-CT-01 PRODUCT CODE.: 93297 05/2016
GB IRE 00800/78747874
AFTER SALES
SUPPORT
MODEL: FLX-CT-01 PRODUCT CODE.: 93297 05/2016
GB IRE 00800/78747874
AFTER SALES
SUPPORT
Great care has gone into the manufacture of this pro-
duct and it should therefore provide you with years of
good service when used properly. In the event of pro-
duct failure within its intended use over the course of
the first 3 years after date of purchase, we will remedy
the problem as quickly as possible once it has been
brought to our attention. In the unlikely event of such
an occurrence, or if you require any information about
the product, please contact us via our helpline sup-
port services, details of which are to be found both in
this manual and on the product itself.
[e-mail]
[e-mail] [e-mail]
[e-mail]