Alfaled AFR-17 User manual

AFR-17 AFR-8-5
●Apply to RGB+CCT LED controller.
Ultra sensitive color adjustment touch w heel.●
●Each remote can match one or more receiver.
● R bC 2032 attery pow ered.
●Operate w ith LED indicator light.
Technical Parameters
Input and Output
W arranty
5 years
W arranty
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Ta: -30
O
C ~+55
O
C
Tc: +85
O
C
Model No.: AFR-17/AFR-8-5
Features
1 and 4 z one RGB+CCT/ Touch color w heel/ W ireless remote 30m distance/ CR2 0 3 2 battery
Ultrathin Touch W heel RF Remote Controller
Output signal RF 2.4GHz( )
W orking voltage 3VDC CR2032( )
W orking current ＜5mA
Standby current ＜10μA
Standby time 1 year
Remote distance 30m
S afety a nd E M C
EMC standard (EMC) EN301 489,EN 62479
Radio Equipment(RED) EN300 328
Certification CE,EMC,LVD,RED
EN60950
Safety standard(LVD)
LVD RED
1 Zone RGB+CCT 4 Zone RGB+CCT
M echani ca l S tructures a nd Insta llations
9mm
58.5mm
107mm
58.5mm
37.00 mm
63.00 mm
68.00 mm
Note: Before the first use,
please remove the protective
film on the battery.
C 2032 BatteryR
Back holder
User Manual Ver 1.0.2 www.alfaled.sk Page 1

Match Remote Control (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press on/ off
key (single zone remote) or zone key (multiple zone
remote) of the remote.
Use Pow er Restart
Match:
Switch off the power, then switch on power again,
immediately short press on/ off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power, then switch on power again,
immediately short press on/ off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes w ere
deleted.
Delete:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes
were deleted.
End user can choose the suitable match/ delete w ay s. Tw o options are offered for selection:
AFR-17, AFR-8-5 Ultrathin Touch Wheel RF Remote Controller
●AFR-17 1 zone RGB+CCT remote
R/ G/ B
Mode
Multi-color wheel
Brightness RGB Color
Color temperature
Speed/ Saturation
On/ Off
Scene
Brightness:Adjust brightness, short press 11 levels,
long press 2s get max or min brightness.
at the same time, multi-color wheel become brightness wheel.
On/ Off: Short press turn on/ off light.
Mode: Switch dynamic mode, short press run the next mode,
long press 2s run mode cycle.
Speed/ Saturation:
For dynamic mode, adjust mode speed,
short press 10 levels, long press 2s get the default speed.
For static RGB color, adjust saturation,
namely change current static color to mixed white slowly,
short press 11 levels,
long press 1-6s for continuous 256 levels adjustment.
Operation
●W hen light is on, touch the color wheel,the indicator will display red.
●To extend battery life, no touch or press key operation after a few seconds,
the touch w heel will enter sleep state, you need press any key to make touch wheel quit sleep state.
To fix the remote, tw o options are offered for selection:
Option 1: fix the remote' back holder on the wall with two screws.
Option 2: adhere the remote' back holder to the wall with paster.
Key function
User Manual Ver 1.0.2 www.alfaled.sk Page 2

Adjust color temperature by W W / CW channel.
CCT: Adjust color temperature, W W CW .short press 11 levels, long press adjust + brightness
at the same time, multi-color wheel become color temperature wheel.
1
Warm White
WW 100%
CW 0%
11
Cool White
WW 0%
CW 100%
6
Natural White
WW 100%
CW 100%
R/ G/ B: Short press get red green or blue color directly, .
long press 1-6s adjust R/ G/ B brightness continuously.
Scene: Short press recall the scene, long press 2s save the current color into scene.
RGB: Adjust static RGB color, short press get 24 kinds static color.
at the same time, multi-color wheel become RGB color wheel.
1
R 100%
9
G 100%
21
R 100%
B 100%
17
B 100%
25(1)
R 100%
5
R 100%
G 100%
13
G 100%
B 100%
●AFR-8-5 4 zone RGB+CCT remote
4 Zone
M ulti-color w hee l
Brightness RGB Color
Color
temperature
AFR-8-5 can also be used as four zone universal remote,
each zone can match single color, dual color(WW/CW),
RGB, RGBW or RGB+WW/CW controller.
Zone 1/ 2/ 3/ 4 + : Single color
Zone 1/ 2/ 3/ 4 + : Dual color(W W / CW )
Zone 1/ 2/ 3/ 4 + : RGB
Zone 1/ 2/ 3/ 4 + : RGBW
Zone 1/ 2/ 3/ 4 + : RGB+W W / CW
For example, long press and key for 2s
will set zone 1 as RGB light type.
W hen remote light type set ok,
the red indicator will light on longer.
M od e
Speed/ S aturation
On/ Off
On/ Off: Turn on/ off all four z one light.
1,2 ,3,4 Zone: Short press turn on z one light, at the same time, select current z one.
Long press 2s turn off z one light.
Mode: Sw itch dy namic mode, short press run the nex t mode, long press 2 s run mode cycle.
S pe ed / S a tur ati on:
For dynamic mode, adjust mode speed,
short press 1 0 levels, long press 2 s get the default speed.
For static RGB color, adjust saturation, namely change current static RGB color to mix ed w hite slow ly,
short press 11 levels, long press 1-6s for continuous 256 levels adjustment.
1
Pure color
11
White Color
User Manual Ver 1.0.2 www.alfaled.sk Page 3
AFR-17, AFR-8-5 Ultrathin Touch Wheel RF Remote Controller

S afety infor mati on
1. Read all instructions carefully before you begin this installation.
2. W hen installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
W hen remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, bew are of falling.
5. For indoor and dry location use only.
RGB: Adjust static RGB color, short press get 24 kinds static color.
at the same time, multi-color wheel become RGB color wheel.
1
R 100%
9
G 100%
21
R 100%
B 100%
17
B 100%
25(1)
R 100%
5
R 100%
G 100%
13
G 100%
B 100%
Brightness:Adjust brightness, short press 11 levels, long press 2s get max or min brightness.
at the same time, multi-color wheel become brightness wheel.
Adjust color temperature by W W / CW channel.
CCT: Adjust color temperature, .short press 11 levels, long press adjust W W +CW brightness
at the same time, multi-color wheel become color temperature wheel.
Multi-color w heel:
W hen it is brightness wheel, touch to change brightness.
W hen it is RGB color w heel, touch to change RGB color.
W hen it is color temperature wheel, touch to change color temperature.
R 100%
G 100%
R 100%
B 100%
R 100%
G 100%
B 100%
G 100%
B 100%
100%
1%
50%
WW 0%
CW 100%
WW 100%
CW 0%
WW 100%
CW 100%
100%
brightness wheel color temperature wheel RGB color wheel
1
Warm White
WW 100%
CW 0%
11
Cool White
WW 0%
CW 100%
6
Natural White
WW 100%
CW 100%
User Manual Ver 1.0.2 www.alfaled.sk Page 4
AFR-17, AFR-8-5 Ultrathin Touch Wheel RF Remote Controller