Allegion Interflex IF-4072 User manual
Table of contents
1 General information............................................................................................................. 4
2 System overview.................................................................................................................. 7
3 Mounting the controller....................................................................................................... 10
4 Connecting the controller ................................................................................................... 10
5 Initial operation .................................................................................................................... 13
6 Updating the software ......................................................................................................... 21
7 Upgrading the controller ..................................................................................................... 22
8 Technical specifications ..................................................................................................... 22
9 Disposal ................................................................................................................................ 23
10 Declarations of conformity ................................................................................................. 24
1 General information
n
n
n
n
expertspeople trained in electrical engineering
Technical
specifications
NOTICE
Property damage due to transient overvoltages
u
NOTICE
Damage due to electrostatic discharge (ESD)
u
AC
CIDR
DC
DI
P
EC
Esd
Gnd
IEEE
Nc
No
PoE
RFId
Sh
Ssh
Cable function Max. length Recommended cable type
+5 VGND
2 System overview
Field of application
Offline mode
Control and Monitoring
No. Description Function
3 Mounting the controller
NOTICE
Damage to property due to manipulation of the controller
u
u
4 Connecting the controller
one
n
n
IF-4072
controller overview [}
nCable lengths and cable types [}
n
n
NOTICE
Malfunction due to improper electrical installation
uCable lengths and cable types [}
u
u
u
n
n
Procedure
n
n
n
power supply via Ethernet (PoE)power
supply via power supply unit
PoE
5 Initial operation
n
n
Service interface USB
Service interface USB
Prerequisites
ü
Open
fieldservice
u
n
n
n
netpar -? netpar
fieldservice@IF‑xxx:~ netpar -?
Display or change network parameters (legacy)
Please consider using nmtui or nmcli instead.
Usage: /opt/interflex/bin/netpar [OPTION]
-i show network settings
-x change IP addr., gateway, netmask and port no
-d use default network configuration
-y use DHCP network configuration
-r restart network interface
-h show DHCP configuration
-m change 'SNMPD' options parameters
-w Connecting Wifi profile netpar-wifi
-? print this help screen
n
n
n-?
nEnter
nWrite to EEPROM (y/n)?y
n
n
netpar -x
one
Enter
fieldservice@IF‑xxx:~ netpar -x
IPv4 address/netmask [172.18.12.65/16]:
IPv4 gateway [172.18.70.1]:
Port [2001]:
Hostname [IF‑xxx]:
Connection 'netpar' (e046c1c5-2eb5-4be0-8655-4f79acffc8bc) successfully
deleted.
Connection 'netpar' (8ff8bd2e-7229-4914-a214-3d60dc0e7f16) successfully
added.
Activate profile netpar
Connection successfully activated (D-Bus active path: /org/freedesktop/
NetworkManager/ActiveConnection/3)
Current profile:netpar
IPv4 address/netmask: 172.18.12.65/16
IPv4 gateway: 172.18.70.1
IPv4 address/netmask (active): 172.18.12.65/16
IPv4 gateway (active): 172.18.70.1
Port: 2001
Hostname: IF‑xxx
fieldservice@IF‑xxx:~
16
CIDR notation Subnet mask
u
Restarting the controller [}
oc -h
n
n
fieldservice@IF xxxx:~ oc -h
base address : 1
No. of term. bus 1 : 6
bus 2 : 4
bus 3 : 6
IF LT64 at bus 2 : 0
Protocol bus 1 : 0
bus 2 : 0
bus 3 : 0
KryptAddr bus 1, 2, 3: 0xFF
Baudrate bus 1 : 3
bus 2 : 3
bus 3 : 3
Number of bookings (1000) : 50
Notice: Baud rate, terminal bus: 2 (9600, 8, ep), 3 (19200 , 8, ep)
appropr. terminals only
Protocol terminalbus: 0 (erfProt), 1 (rsiProt, 9600,8,noParity)
Your license allows 16 terminals as maximum
Description
cfg
fieldservice@IF xxxx:~ cfg
Terminal configuration IF xxxx/4735 IT-2018.02.0-794-g91e557d6d26e
Host: Ethernet
----------------------------------------------------------------
No B A HA TNo type HWU SWU display keys read.1 read.2 In/Out I/O
-- - - -- --------- ------- ----- ----- ------- ------ ------ --
1 1 A 1 0 IF611 3.00 7.b ../.... ....N. PSCR/P ...... ...... ++
2 1 B 2 0 IF600 3.00 7.c ../.... ...... LAP4 ...... ...... ++
----------------------------------------------------------------
Internet address: 172.18.12.65
Port-number: 2001
MPU board: phyCORE-AM335x
Text Description
Warm boot
n
n
oc -sfactory-reset application-restart
Reboot
n
n
n
n
factory-reset reboot
Cold boot
oc -c factory-reset application
Reset network settings to factory default
not
Factory reset
factory-reset full
Other manuals for Interflex IF-4072
1
Table of contents
Other Allegion Controllers manuals
Allegion
Allegion interflex IF-4077-8 User manual
Allegion
Allegion LCN 8310-815 User manual
Allegion
Allegion Simons Voss Technologies SmartCD2.G2 User manual
Allegion
Allegion Simons Voss Technologies SmartCD2.G2 User manual
Allegion
Allegion 8310816 User manual
Allegion
Allegion interflex IF-4077-4 User manual
Allegion
Allegion Interflex IF-4070 User manual
Allegion
Allegion Interflex IF-4072 User manual
Allegion
Allegion Interflex IF-4076-4 User manual
Allegion
Allegion LCN 8310-813 User manual
Popular Controllers manuals by other brands
Berker
Berker KNX-RF Operation instructions
Carrier
Carrier MINIMUM LOAD CONTROL ACCESSORY 30XA080-500 installation instructions
Envirosight
Envirosight VISIONCONTROL VC500 user manual
Rosslare
Rosslare AC-225? AC-225IP? AC-225U Installation and user guide
REMEHA
REMEHA Celcia 20 Quick start-up
Merik
Merik M220 Installation and user manual