ALLEN & HEATH XONE:K1 User manual

The Xone:23C DJ Mixer ships with Mixvibes Cross LE DJ Software, providing DVS control and plug
n’play mapping for Xone:K Series controllers.
The default mapping for the Xone:K Series controllers with Mixvibes Cross LE offers extended soft-
ware control.
Instructions for Xone:K1 with Cross LE.
1. Connect the computer to the Xone:23C mixers USB Soundcard.
2. From the rear of the Xone:K1, connect the X:LINK OUT to the Xone:23C mixers X:LINK.
A. By default the K1 ships on MIDI channel 15, which this map is assigned to.
B. If you need to change the MIDI channel:
1. Press and hold down the encoder [1], then power up by plugging
the X:LINK cable.
2. The switch matrix LED’s will flash RED three times to indicate
that the K1 has entered setup mode.
1. The channel number is represented by the number of illuminated
switches; in this case MIDI Channel 15.
2. To change the MIDI Channel number, rotate the Setup encoder.
3. Once the desired MIDI Channel Number has been chosen, press
the Setup Encoder [1] to store it and return to the setup mode.
4. Press the amber switch to exit setup mode and the switch ma-
trix LED’s will flash RED three times.
1
1
The display will default as above, with Switch ‘A’ (the MIDI CHANNEL setup option) being illuminated.
Press the setup encoder [1] to display the current MIDI channel number.

LOCATORS A
LOCATORS B
L 1
L 2
L 3
L 4
L 1
L 2
L 3
L 4
SHIFT
CUE A CUE B
PLAY A PLAY B
SYNC A
SYNC C SYNC D
SYNC B
SHIFT: LINK C + D
SAMPLER C VOLUME
SAMPLER D VOLUME
SELECT FX 1 SELECT FX 2
FX 1 ON FX 2 ON
FX 1 AMOUNT FX 2 AMOUNT
FX 1 DEPTH FX 2 DEPTH
SEEK FW A
SEEK BK A SEEK FW B
SEEK BK B
SMART SEEK
LENGTH A
SMART SEEK
LENGTH B
FILTER A FILTER B
FILTER C FILTER D
SET AS
MASTER A
SET AS
MASTER B
A PITCH
BEND -
A PITCH
BEND +
B PITCH
BEND -
B PITCH
BEND +
PUSH: SNAP
SHIFT: SNAP VALUE
PUSH: QUANTIZE
SHIFT: QUANTIZE VALUE
PUSH: LOOP A
SHIFT: LOOP A SIZE
PUSH: LOOP B
SHIFT: LOOP B SIZE
SCROLL: BROWSE
PUSH: LOAD A
SHIFT: CHANGE ACTIVE BROWSABLE
SCROLL: SEEK PREVIEW
PUSH: LOAD B
SHIFT: PREVIEW ON/OFF
SAMPLER C PAD 1—4
SAMPLER D PAD 1—4
SHIFT: SHIFT: