Allen + Roth 0441150 User manual

Questions, problems, missing parts?Before returning to your retailer, call our customer
service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Friday.
ITEM #0441150
French p. xx
MODEL #EFC-WS-13-004
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
1
Español p.xx
allen + roth® is a registered trademark
of LF, LLC. All Rights Reserved.
SINGLE ZELDA W/BURLAP

PACKAGE CONTENTS
2
PART DESCRIPTION QUANTITY
A Back Panel 2
B Shelf 3
B
B
B
A
A

AA
KD
Screw
Qty. 6
HARDWARE CONTENTS (shown actual size)
3
BB
Allen
Wrench
Qty. 1
CC DD
WARNING
• Do not allow children to climb this product.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or
install the product.
• Assemble the parts on a soft, non-abrasive surface, such as carpeting, to avoid
scratching the finish.
• This unit can hold up to 50 lbs. per shelf. Distribute weight evenly.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (included): Allen Wrench
Pinhead
Screw
Qty. 2
Wall
Anchor
Qty. 2
Tools Required for Assembly (not included): Phillips Screwdriver, 1/4 in. Masonry Drill Bit,
Marking Pencil, Level, Hammer, Drill

1. Attach shelf (B) to back panel (A) using
six KD screws (AA). Tighten with
Allen wrench (CC). Do not overtighten
KD screws (AA) to avoid cracking
the wood.
Hardware Used
4
1
AA KD Screw
x 6
CC Allen Wrench x 1
ASSEMBLY INSTRUCTIONS
A
A
B
B
B
1
CC
AA

1. Hold the unit against the wall at the
desired height. Mark the keyhole positions
with a marking pencil (not included),
making sure it is level. Using a 1/4 in.
masonry bit (not included), drill three
holes into the pre-marked keyhole
positions.
2.
3.
5
HANGING INSTRUCTIONS
Hardware Used
DD Wall Anchor x 2
2
3
1
Hardware Used
BB Pinhead
Screw
x 2
Anchor the wall using the wall anchors
(DD).
Install a pinhead screw (BB) for each
keyhole plate. Leave the head exposed
at least 1/10 in. Hang the unit from the
wall by pushing the keyhole plate over
the pinhead screws (BB) and push the
unit down to lock it in place.
DD
DD
BB

6
CARE AND MAINTENANCE
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-866-439-9800,
8 a.m. - 8 p.m., EST, Monday - Friday.
Printed in Thailand
• Periodically check to make certain all components are properly positioned, free from damage
and firmly connected.
• Wipe clean using a damp cloth and a mild cleaner. Wipe dry with a clean cloth.
0441152-A
0441152-B
PART DESCRIPTION
ABack Panel
B Shelf
0441152-AAAA KD Screw
0441152-BBBB Pinhead Screw
0441152-CCCC Allen Wrench
0441152-DD
DD
Wall Anchor
PART #
AA BB CC DD
B
A
B
B
B
A