Allen + Roth EFC-WS13-007 User manual

ITEM #0441147
COLONIAL WALL SHELF
French p. 6
MODEL #EFC-WS13-007
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
1
Español p.11
allen + roth® is a registered trademark
of LF, LLC. All Rights Reserved.

PACKAGE CONTENTS
2
PART DESCRIPTION QUANTITY
A Shelf 1
A

HARDWARE CONTENTS (shown actual size)
3
AA
Pinhead
Screw
Qty. 7
Wall
Anchor
Qty. 7
Bracket
Qty. 1
BB
Long
Screw
Qty. 2
CC DD
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or
install the product.
• Assemble the parts on a soft, non-abrasive surface, such as carpeting, to avoid
scratching the finish.
• This unit can hold up to 15 lbs. per shelf. Distribute weight evenly.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 20 minutes
Tools Required for Assembly (not included): Phillips Screwdriver, 1/4 in. Masonry Drill Bit,
Marking Pencil, Level, Hammer, Drill

2.
3.
4
ASSEMBLY INSTRUCTIONS
Hardware Used
BB Wall Anchor x 7
2
3
1
Hardware Used
AA Pinhead
Screw
x 7
Insert the wall anchors (BB).
Install bracket (DD) by securing the
pinhead screws (AA) into the anchors
(BB) through the bracket (DD).
BB
AA
DD
1. Hold the bracket (DD) against the wall
at the desired height.Mark the hole
positions with a marking pencil (not
included). Make sure the holes are level.
Using a 1/4 in. masonry bit (not included),
drill three holes into the pre-marked
keyhole positions.

4. Hang the shelf (A) onto the bracket (DD).
5.
ASSEMBLY INSTRUCTIONS
Hardware Used
CC Long Screw x 2
5
4
Secure the shelf (A) with the long
screws (CC).
DD
CC CC
A
A
5
CARE AND MAINTENANCE
• Periodically check to make certain all components are properly positioned,
free from damage and firmly connected.
• Wipe clean using a damp cloth and a mild cleaner. Wipe dry with a clean cloth.
Printed in Thailand