allgood 9151A User manual

QUALITY SINCE 1948
Fixing template for:
9151A, 9151ADC & 9151ASO
To be read with Fixing Instruction Fl9151A).
FT9151A Issue 04-03/22
T: 020 7387 9951 www.allgood.co.uk
273
12387
UNDERSIDE OF HEAD FRAME
HOW TO USE TEMPLATE:
ACCURATELY POSITION THE TEMPLATE ON THE DOOR ALIGNING
THE HINGE CENTRELINE AND UNDERSIDE OF HEAD FRAME. MARK
HOLES AND POSITION BRACKET.
SEE FIXING INSTRUCTIONS FI9151/6.
CLOSER BODY FIXING HOLES MUST BE DRILLED AT AN 18°(SEE
DIAGRAM BELOW).
DRILL SIZE 3mm. FIX WITH No.8 SCREWS PROVIDED.
HINGE CENTRELINE
5830
UNIT FACTORY SETTINGS AT POWER SIZE 3.
SPRING POWER ADJUSTMENT
DOOR WIDTH
750-830
830-930
930-1030
1030-1130
TURNS
3
6
9
15
SIZE
2
2
3
4
WHEN USED ON FIRE DOORS UNIT
MUST BE ADJUSTED TO POWER SIZE
3 OR ABOVE.
TABLE FOR GUIDANCE ONLY.
ALTERNATIVE (9151FN) FRAME
BRACKET SHOWN DOTTED. FOR
FIXING TO FLUSH HEAD FRAME.
Fixing Template For:
9151A, 9151ADC & 9151ASO.
(To Be Read With Fixing Instruction FI9151A).
FT9151A
Issue 04-03/22
58
35
18° 18°
T: 020 7387 9951 1www.allgood.co.uk
Recycle Responsibly
24
27
13
BRACKET SETTING MARKS MUST
ALIGN WITH DOOR FACE

QUALITY SINCE 1948
Fixing template for:
9151A, 9151ADC & 9151ASO
To be read with Fixing Instruction Fl9151A).
FT9151A Issue 04-03/22
T: 020 7387 9951 www.allgood.co.uk
UNDERSIDE OF HEAD FRAME
HOW TO USE TEMPLATE:
ACCURATELY POSITION THE TEMPLATE ON THE DOOR ALIGNING
THE HINGE CENTRELINE AND UNDERSIDE OF HEAD FRAME. MARK
HOLES AND POSITION BRACKET.
SEE FIXING INSTRUCTIONS FI9151/6.
CLOSER BODY FIXING HOLES MUST BE DRILLED AT AN 18°(SEE
DIAGRAM BELOW).
DRILL SIZE 3mm. FIX WITH No.8 SCREWS PROVIDED.
HINGE CENTRELINE
UNIT FACTORY SETTINGS AT POWER SIZE 3.
SPRING POWER ADJUSTMENT
WHEN USED ON FIRE DOORS UNIT MUST
BE ADJUSTED TO POWER SIZE 3 OR
ABOVE. TABLE FOR GUIDANCE ONLY.
ALTERNATIVE (9151FN) FRAME
BRACKET SHOWN DOTTED. FOR
FIXING TO FLUSH HEAD FRAME.
18°18°
DOOR WIDTH
750-830
830-930
930-1030
1030-1130
TURNS
3
6
9
15
SIZE
2
2
3
4
T: 020 7387 9951 2www.allgood.co.uk
Recycle Responsibly
30
35
5887123
Fixing Template For:
9151A, 9151ADC & 9151ASO.
(To Be Read With Fixing Instruction FI9151A).
FT9151A
Issue 04-03/22
273
24
27
13
BRACKET SETTING MARKS MUST
ALIGN WITH DOOR FACE