Allied Telesis AT-RG613TX Series User manual

AT-RG613 SERIES
Residential Gateways
RESIDENTIAL GATEWAYS
AT-RG613TX-xx
Residential gateway, 3 x 10/100TX LAN,
2xFXS, 1x100TX WAN port
AT-RG613SH-xx
Residential gateway, 3 x 10/100TX LAN,
2xFXS, 1 x 100FX SH dual fiber WAN port
AT-RG613LH-xx
Residential gateway, 3 x 10/100TX LAN,
2xFXS, 1 x 100FX LH dual fiber WAN port
AT-RG613BD-xx
Residential gateway, 3 x 10/100TX LAN,
2xFXS, 1 x 100FX single fiber BiDi WAN port
AT-RG613BD-10 Bundled
Residential gateway, 3 x 10/100TX LAN,
2xFXS, 1x100FX single fiber BiDi WAN port
With Single-Fiber passivewall outlet & fiber
splice kit.
THE RESIDENTIAL GATEWAY
Providing powerful Layer 3 capabilities as well as
an enhanced VoIP feature-set the AT-RG600 Series
entersthe marketplace as a new family of residen-
tial gateways from Allied Telesyn.
VLAN OPERATION WITH INTEGRAL
4-PORT SWITCH (1 X WAN, 3 X LAN)
An evolution of the successful AT-RG200 Series,
the AT-RG600 Residential Gateways support up to
16 port-based, IEEE 802.1Q-tagged
VLANs across
its 3 x 10/100Mbps and 1 x 100Mbps WAN
switch ports.This potent combination provides
wirespeed Layer 2 switching between VLANs in
addition to high-performance Layer 3 routing
between VLANs in one highly cost-effective unit.
FIREWALL
The AT-RG600 Series protects customer-networks
using integral Stateful Inspection Firewalls with
NAT and Denial of Service intrusion detection and
blocking. Additionally, each VLAN can be config-
ured to be external, internal, or a DMZ. With the
Virtual Server features, Web or e-mail servers can
sit beyond the NAT and appear to be present on
the public interface.The AT-RG600 Series NAT
supports the most popular protocols and applica-
tions including NetMeeting (H.323 and SIP), IPSec,
and PPTP.
PORT RATE-LIMITING
The AT-RG600 Series provides the option to limit
the egress and ingress bandwidth of each port and
queue traffic with a granularity of 32kbps.This fea-
ture allows service operators to offer differentiat-
ed services to each customer while protecting its
networkfrom malicious packet-flooding.
VOICE OVER IP (VOIP)
The AT-RG600 series offers a choice of Voice over
IP signaling methods—including H.323, SIP, and
MGCP with the NCS 1.0 profile.This multiple pro-
tocol support delivers maximum flexibility for
service providers, allowing them to provide IP
telephony services based on cost and feature-set,
rather than being limited bythe protocol.
VIDEO STREAMING
Video streaming offers unique features that opti-
mize the delivery of video content to customers—
including VLAN, IGMP snooping, and proxying.The
AT-RG600 Series supports full IGMP snooping
capabilities (v1/v2) and individual LAN ports can
receive different multicast transmissions, whether
movies or TV channels.The AT-RG600 Series
snoops IGMP packets in-transit to determine the
destination-port for the particular multicast data.
This process results in high-quality, high-bandwidth
video streaming that does not affect Internet surf-
ing or IP telephony on adjacent ports.
KEY FEATURES
•3x10/100TX Ethernet ports
•2 x FXS ports for Analog Telephones/Fax
•100Mbps (copper or fiber) WAN interface
•Tagged-based VLAN (IEEE 802.1Q)
•Layer 2 & Layer 3 QoS
•IGMP snooping & proxying
•PPPoE protocol support
•UPnP IGD profile support & NAT traversal
•DHCP client, server & relay support
•Stateful Inspection Firewall
•Network Address Translations (NAT)
•H.323, SIP or MGCP VoIP protocol support
•G.711, G.726, G.729 & G.723 (optional)
•T.38 fax operation
•External AC power supply
•Optional External battery backup
•ZTC,Web GUI, SNMP, serial & Telnet CLI for
management & configuration

AT-RG613 SERIES
Residential Gateways
MANAGEMENT & CONFIGURATION
The AT-RG600 is designed for high-volume deploy-
ment—as reflected by the Zero-Touch
Configurator (ZTC) that requires no user inter-
vention to install the unit. A distributed configura-
tion system based on the industry standard
Lightweight Directory Access Protocol (LDAP),
ZTC provides intelligent and automatic configura-
tion of remote RG units.
The ZTC client in the RG initiates the download
process on power-up or upon expiry of its DHCP
lease timer. After analyzing incoming status infor-
mation from each RG unit, ZTC dynamically cre-
ates the appropriate configuration file or operating
system download as required; it then selects the
appropriate download mechanism and completes
the process. ZTC provides secure authentication
of client devices, resilience through distributed
server operation, and built-in scalability for very
large networks.
The AT-RG600 series also offers the following con-
ventional management & configuration interfaces:
• Local console port (using Command Line
Interfaces)
• Telnet (using Command Line Interfaces)
• SNMP v1/v2
SPECIFICATIONS
USER PORTS
310/100TX (RJ45)
2VoIP FXS ports (RJ-11)
WAN
10/100TX (RJ45) RG613TX
100FX multi-mode (SC) RG613SH
100FX single-mode (SC) RG613LH
100FX single-mode BiDi RG613BD
VoIP PROTOCOLS
H.323 3.0
SIP 2.0
MGCP (NCS 1.0)
VoIP PORTS
G.711 a-law and -law 64kbps
G.729 8kbps
G.726 16/24/32/40kbps
G.723.1 (optional) 5.3kbps and 6.3kbps
G.168 LEC 8-32 msec
T.38 Fax Relay
Automatic fax/modem detection
Voice Activity Detection (VAD)
ComfortNoise Generation (CNG)
Caller ID
Error mitigation/bad frame interpolation
Adaptive jitter buffer
5REN
RTP voice packet encapsulation
LAYER 2 OPERATION
Layer 2 wirespeed packet switching
IGMP v1/v2 multicast support
Tag based IEEE 802.1Q VLANs (16 max.)
IEEE 802.1p prioritization
IEEE 802.1Q tag insertion and stripping
Programmable rate-limiting ingress/egress (32,000 steps)
Port-mirroring ingress/egress traffic
Double QoS queue on each port
Port speed selection 10, 100 or 10/100
1,000 MAC addresses
LAYER 3 OPERATION
NAT
PPPoE
Stateful Inspection Firewall
Intrusion detection & blocking system
IPSec/VPN pass-through
Virtual server
Global IP address pool
Dynamic port opening
DHCP client, server, and relay
DNS proxy
PAP/CHAP authentication
Static and dynamic IP address assignment
RIPv2
MANAGEMENT
Zero Touch Configurator (ZTC), local console port, Telnet, SNMP,
Telesyn NMS
REMOTE SOFTWARE UPGRADE
DHCP, upgrade via TFTP
Zero Touch Configurator (ZTC)
STATUS LEDS
Power
System
POTs use / ready / ringing
WAN link / activity
LAN link / activity
POWER CHARACTERISTICS
External power supply
Input 12vDC, 1.5A
Power Consumption 10W
ENVIRONMENTAL SPECIFICATIONS
Operating Temp. 0°C(32°F) to 40°C (104°F)
Non-Operating Temp. -10 ºC (14°F) to 70 ºC (158°F)
Operating Humidity 5% to 85% RH
PHYSICAL CHARACTERISTICS
AT-RG613SH/LH/BD
H x W x D 14.4cm (5.7") x 23.5cm (9.3") x
5cm (2")
Weight 0.45kg (1.0 lb.)
AT-RG613TX
H x W x D 4.6cm (1.8") x 19.8cm (7.8") x
14.9cm (5.9")
Weight 0.45kg (1.0 lb.)
STANDARDS & COMPLIANCE
IPv4 RFC791
TCP, UDP RFC1144
IGMP (v1/v2) RFC1112, 2236
PPPoE RFC2516
PAP RFC1334
CHAP RFC1994
NAT RFC1631
DHCP RFC2131
H.323 4.0
SIP 2.0 RFC3261
MGCP/NCS 1.0
IEEE 802.1p/Q, IEEE 802.1d
IEEE 802.2, IEEE 802.3x
SNMP v1
G.711, G.726, G.729, G.723.1 (optional)
RTP/RTCP
TFTP RFC1350
Telnet RFC318
ARP RFC826
ELECTRICAL/MECHANICAL
APPROVALS
CE Marking
Safety EN 60950
CSA 950/US
UL 1950
Emission FCC Part 15 Class B Part 68
EN55022 Class B
Immunity EN55024
WARRANTY
2-year warranty
RESIDENTIAL GATEWAYS

AT-RG613 SERIES
Residential Gateways
ORDERING INFORMATION
AT-RG613TX-xx
Residential gateway, 3 x 10/100TX LAN,
2xFXS, 1 x 100TX WAN port
AT-RG613SH-xx
Residential gateway, 3 x 10/100TX LAN,
2 x FXS, 1 x 100FX SH dual fiber WAN port
AT-RG613LH-xx
Residential gateway, 3 x 10/100TX LAN,
2 x FXS, 1 x 100FX LH dual fiber WAN port
AT-RG613BD-xx
Residential gateway, 3 x 10/100TX LAN,
2 x FXS, 1 x 100FX single fiber BiDi WAN port
Where xx = 10 for U.S. power cord
20 for no power cord
30 for U.K. power cord
40 for Australian power cord
50 for European power cord
AT-RG613BD-10 Bundled
Residential gateway, 3 x 10/100TX LAN,
2 x FXS, 1 x 100FX single fiber BiDi WAN port
With Single-Fiber passive wall outlet & fiber splice kit.
RESIDENTIAL GATEWAYS
ACCESSORIES
AT-RG001
(10 pieces), dual-fiber passive outlet
(Required for dual-fiber RG613 versions)
AT-RG002
(10 pieces), single-fiber passive outlet
(Required for AT-RG613BD)
AT-RG005
Batterybackup
AT-RG006
Battery backup cable
AT-RGCONSOLECABLE-00
Not included with RG unit,
must be ordered separately
AT-RG010
Fiber outlet kit single-mode fusion splice
AT-RG011
Fiber outlet kit multi-mode fusion splice
AT-RG020
Fiber outlet kit single-mode mechanical splice
AT-RG021
Fiber outlet kit multi-mode mechanical splice
ABOUT ALLIED TELESYN
Allied Telesyn was founded in 1987 with the goal of producing reliable, standards-based
networking products. Focused on Ethernet/IP solutions geared to applications, Allied Telesyn
offers access-edge products like switches, fiber/copper MAPs, and CPE.We’re also a leading
global manufacturer of media converters, unmanaged switches, and NICs. Our customer-driven
approach has made Allied Telesyn the ideal choice for IT professionals looking for high-quality,
feature-rich network solutions at a lower price. Allied Telesyn – It’s Our Network,Too.
www.alliedtelesyn.com
©2004 Allied Telesyn International Corp. All rights reserved. Information in this document is subject to change without notice.
All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
617-00544-00 Rev. E
USA Headquarters 19800 North Creek Pkwy, Suite 200, Bothell, WA 98011, USA
Tel [phone] Fax [phone]
European Headquarters Via Motta 24, 6830 Chiasso, Switzerland
(Corporate) Tel [phone] Fax [phone]
(European Sales) Tel [phone] Fax [phone]
RESIDENTIAL GATEWAYS