Allied Telesis RMT20 User manual

Datasheet | Remote Multiservice Terminal
Product Overview
The RMT20 (Remote Multiservice Terminal) is a
sealed, climate controlled cabinet that protects
Allied Telesis access equipment from water, dust
and all other outdoor elements. The RMT20 is
one of nine sizes of cabinets and offers service
providers the opportunity to select an exact
match for their needs, with the assurance that
Allied Telesis integrates the Multiservice Access
Platform (iMAP) and associated equipment
before shipment.
Capacity
RMT20 cabinet is sized to accommodate
initial capacity needs and allow for future
growth. Allied Telesis will work with service
providers to find an ideal cabinet size with
port counts ranging from small to large sized
applications for POTS, xDSL or FTTx
deployments.The Allied Telesis equipment will
then be integrated into the cabinet and shipped.
T
urnkey System
The RMT20 cabinets include Allied Telesis
integrated Multiservice Access Platforms
(iMAPs) but also DC power plants, POTS
splitters, cable management and other
accessories.This equipment is installed in the
RMT20 and tested before shipment.This
reduces on-site staging and the chance for
installation errors.
Connectivity
The RMT20 supports POTS, ADSL/ADSL2+,
VDSL2, and fiber, as well as mixed POTS,
ADSL/ADSL2+,VDSL2, and fiber deployments.
The RMT cabinets are unique in their use of
high performance CAT5 cabling for ADSL2+
and VDSL2 applications.The optimized cabling
scheme reduces noise and crosstalk to improve
overall performance, paving the way to higher
reliability and more service choices. Service
providerscan expect to see improved rate vs.
reach as a result of the optimized cabling
schemes.
Flexibility
The RMT20 use an expandable power
supply system that supports entry-level needs
and easily grows to support additional demand.
Battery back-up, battery heaters, pad/pole
mounting kits, integrated cross connects and
copper pair protection is optional.
Reliability
The RMT20 meets Telcordia GR-487
standards. Battery compartments are sized
to accommodate up to 150 amp hour battery
strings providing for eight hour battery back-up.
The enclosures require little,if any,maintenance
for fans and filters.
Key Features
•Integrated environmentally controlled cabinet for
Outside Plant (OSP) deployments
•Integrated power supplies and Allied Telesis
integrated Multiservice Access Platforms
•Arange of OSP cabinet sizes and configurations
sized to meet deployment needs
•Supports POTS, ADSL2+ and legacy telephony
along with fiber FTTx deployments
•Sealed design with efficient, low maintenance
environmentally controlled cooling
•Meets Telcordia GR-487 requirements
•Optional batteries, battery heater, generator
connector, integrated cross connect and other
cabinet accessories
•Optional CAT5 wiring between all cabinet
components
RMT20
Remote Multiservice Terminal
Allied T
elesis www.alliedtelesis.com

Technical Specifications
Physical Characteristics
Dimensions 110.7 x 151.8 x 71.6cm (w/o SAI)
(W x D x H) 43.59 x 59.75 x 28.2in
140.8 x 151.8 x 71.6cm (with SAI)
55.45 x 59.75 x 28.2in
Weight 113kg (250lbs)
Enclosure Mounting
Pad or pole
Mounting Space
38in (21RU)
Hole Spacing on Racks
One inch
Rack Widths
23in EIA std
Center Mounting
Standard 12in deep
Heat Exchanger
One
Temperature
Fan turns on 37°C (100°F)
High temp. alarm 65°C (150°F)
Heat dissipation 900W
AC System
Eight position load center
Convenience Outlets
One in equipment chamber
Battery Heater Pad
Optional
Compatible Batteries
4 x 48vDC
Battery Amp-hour Reserve
150 AMP hours
Padlockable
216-type tool
Intrusion Alarm
Local with remote location options
Bonding and Grounding
210-position dual-holed
L49 copper buss, 3/16in
Cable Entrance
3x2.5in cable cones
Protect Field
Up to 400-pair
Cross Connect Field
Up to 400-pair
Ordering Information
AT-TN-R015-A Cable, alarm, 10ft
AT-TN-R016-A Fiber tray
AT-TN-R018-A RMT20/30 mounting template with
SAI pad
AT-TN-R020-A RMT20/30 battery heater pad
AT-TN-R021-A RMT20 with SAI enclosure
AT-TN-R022-A Hubbel con for external generator, 30A
AT-TN-R023-A RLS block, 50-pair, CAT3, 3M MS2 conns
AT-TN-R024-A Battery (1) 12vDC, 155AH, front post
AT-TN-R027-A Bullet breaker, 30A
AT-TN-R028-A Protection block, 200PR, CAT5,
3M MS2 conns
AT-TN-R031-A 25A rectifier
AT-TN-R032-A Rectifier controller, LAN capable
AT-TN-R033-A RMT20 without SAI enclosure
AT-TN-R034-A 200-pair copper protection - wired with
CAT 3 cabling and connectorized with
3M MS2 connectors
AT-TN-R035-A 50-pair RLS block wired with
CAT 5 cabling and connectorized with
3M MS2 connectors
AT-TN-R036-A Qty (1) -12vDC 100 A-hr front post
batteries
AT-TN-R037-A Pad mount template for RMT20/RMT30
without SAI
AT-TN-R038-A Pole mount kit for RMT20/RMT30,
with SAI
AT-TN-R039-A Pole mount kit for RMT20/RMT30,
without SAI
AT-TN-R051-A 20A rectifier
AT-TN-R053-A 10A rectifier
RMT20 |Remote Multiservice Terminal
USA Headquarters |19800 North Creek Parkway |Suite 100 |Bothell |WA 98011 |USA |T: [phone] |F: [phone]
European Headquarters |Via Motta 24 |6830 Chiasso |Switzerland |T: +41 91 69769.00 |F: +41 91 69769.11
Asia-Pacific Headquarters |11 T
ai Seng Link |Singapore |534182 |T: [phone] |F: [phone]
www.alliedtelesis.com
©2008 Allied T
elesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000279 Rev.A