Allnet ALL-WAP02850N User manual

A
0
ALL-WAP02850N
Wireless N 300Mbit Dual Band AP PoE
User´s Manual

A
1
Table of Contents
1INTRODUCTION 5
1.1 Features and Benefits ....................................................................................5
1.2 Package Contents...........................................................................................6
1.3 System Requirements ....................................................................................7
1.4 Applications ...................................................................................................7
2BEFORE YOU BEGIN 9
2.1 Considerations for Wireless Installation ......................................................9
2.2 Computer Settings (in Windows XP/Windows 7)......................................10
2.3 Computer Settings in Apple Mac OS X.......................................................13
2.4 Hardware Installation ..................................................................................14
3CONFIGURING YOUR ALL-WAP02850N 15
3.1 Default Settings ...........................................................................................15
3.2 Web Configuration ......................................................................................16
4BUILDING A WIRELESS NETWORK 18
4.1 Access Point Mode.......................................................................................18
4.2 Client Bridge Mode......................................................................................19
4.3 WDS AP / WDS Station Mode .....................................................................20
4.4 WDS Bridge Mode .......................................................................................21
4.5 Repeater mode.............................................................................................22
5STATUS 23
5.1 Save/Reload..................................................................................................23
5.2 Main..............................................................................................................24

A
2
5.3 2.4G Wireless Client List ..............................................................................26
5.4 2.4G Connection Status ...............................................................................27
5.5 2.4G WDS Link List.......................................................................................28
5.6 System Log ...................................................................................................29
6SYSTEM 30
6.1 Operation Mode...........................................................................................30
6.2 IP Settings ....................................................................................................32
6.3 Spanning Tree Setting .................................................................................33
72.4G WIRELESS 35
7.1 Wireless Network.........................................................................................35
7.2 Wireless Security..........................................................................................38
7.3 Site Survey....................................................................................................41
7.4 Wireless MAC Filtering ................................................................................44
7.5 Wireless Advanced Settings ........................................................................45
7.6 WPS (Wi-Fi Protected Setup)......................................................................47
7.7 WDS Link Settings .......................................................................................49
8MANAGEMENT 51
8.1 Administration .............................................................................................51
8.2 Management VLAN Settings.......................................................................52
8.3 Wireless Traffic Shaping..............................................................................57
8.4 SNMP Settings .............................................................................................59
8.5 Backup/Restore............................................................................................61
8.6 Firmware Upgrade .......................................................................................62
8.7 Time Settings ...............................................................................................63

A
3
8.8 Schedule .......................................................................................................64
8.9 CLI Setting ....................................................................................................66
8.10 Log ................................................................................................................67
8.11 Diagnostics ...................................................................................................68
8.12 LED Control ..................................................................................................70
8.13 Logout ..........................................................................................................71
8.14 Reset .............................................................................................................75

A
4

5
1Introduction
The ALL-WAP02850N is a high-powered, long-range dual-band concurrent
wireless 802.11a/b/g/n access point with six major functional modes. It is designed to
operate in numerous environments from large homes, small and medium-sized
businesses, multiple-floor offices, hotels and other venues to larger enterprise
deployments. Its high-powered, long-range characteristics make it a cost-effective
alternative to ordinary access points that don’t have the range and reach to connect
to a growing number of wireless users who wish to connect to a large home or
business network.
The ALL-WAP02850N supports IEEE 802.11b/g/n standards in the 2.4GHz frequency
band
The ALL-WAP02850N delivers up to 6x faster wireless speeds and 7x extended
coverage than legacy 802.11a/b/g wireless devices. Even though the ALL-WAP02850N
has been designed and engineered for traffic heavy and demanding business
environments it is also quite at home in larger house scenarios because it efficiently
extends the wireless range of an existing home router, especially in very
architecturally-challenging structures to provide whole home connectivity.
To protect sensitive data during wireless transmissions, the ALL-WAP02850N offers
different encryption settings for wireless transmissions including industry-standard
WPA and WPA2 encryption. The ALL-WAP02850N also includes MAC address filtering
to allow network administrators to offer network access only to known computers and
other devices based on their MAC addresses.
1.1 Features and Benefits
Features
Benefits
High Speed Data Rate Up to
300 Mbps for each band
(2.4GHz )
Capable of handling heavy data payloads such as HD
multimedia streaming.
10/100/1000 Gigabit Ethernet
Supports up to 1000Mbps wired networking speed.
IEEE 802.11n Compliant and
Backwards Compatible with
802.11 b/g devices
Fully compatible with IEEE 802.11 b/g/n devices.

A
6
Multiple Operation Modes
Allowing users to select any one of the following
modes: Access Point, Client Bridge, WDS AP, WDS
Bridge, WDS Station and Repeater depending on
their specific networking deployment need.
Support Multiple SSIDs in AP
mode (up to 8 in each
frequency band)
Allows clients to access different networks through
a single access point and assign different policies
and functions for each SSID through the built-in
software.
WPA/WPA2/IEEE 802.1x
Support
Supports industry-standard wireless encryption.
MAC Address Filtering in AP
Mode
For more secure network connections with known
users and devices.
User Isolation Support (AP
mode)
Offers an additional layer of protection within the
network by isolating specific client users.
Power-over-Ethernet
(IEEE802.3at/af)
Allows installers to deploy the ALL-WAP02850N in
locations via a PoE connection (Ethernet cable)
where a power outlet may not be available.
Save User Settings
Enables network administrators to save their device
settings so firmware upgrades do not permanently
delete previous device settings.
SNMP Remote Configuration
Management
Allows remote connection to configure or manage
the ALL-WAP02850N easily.
QoS (WMM) support
Prioritizes bandwidth-intensive and sensitive data
traffic.
IPv6 Address support
ALL-WAP02850N supports IPv6, you can use IPv6
address in ALL-WAP02850N.
Band Steering
When Band Steering is activated dual-band client
devices are associated to the ALL-WAP02850N
access point on the 5 GHz frequency band.
1.2 Package Contents
The ALL-WAP02850N package contains the following items (Resellers and dealers
require that all items must be in package to issue a refund):
ALL-WAP02850N Access Point/Client Bridge
12V/2A 100V~240V Power Adapter
RJ-45 Ethernet LAN Cable
2.4 GHz Detachable Antenna x 2
CD with User's Manual

A
7
Quick Installation Guide
Please use only the power supply unit that is delivered with the device.
Bitte verwenden Sie nur das mitgelieferte Netzteil.
1.3 System Requirements
The following are the Minimum System Requirements in order configure the device.
Computer with an Ethernet interface or wireless network capability
Windows OS (XP, Vista, 7), Mac OS X, or Linux-based operating systems
Web-Browsing Application (i.e.: Internet Explorer, Firefox, Safari, or other similar
browser application)
1.4 Applications
Wireless LAN (WLAN) products are easy to install and highly efficient. The following
list describes the benefits of deploying a wireless access point:
a) Difficult-to-Wire Environments
There are many situations where wires cannot be installed, deployed easily or
cannot be hidden from view. Many older buildings sites, or areas within a
building may make the installation of an Ethernet-based LAN impossible,
impractical or expensive.
b) Temporary Workgroups
A deployed wireless access point or several access points, gives businesses the
flexibility to create temporary workgroups/networks in more open areas within a
building –auditoriums, amphitheater classrooms, ballrooms, arenas, exhibition
centers, and temporary offices.
c) The Ability to Access Real-Time Information
Doctors/Nurses, Point-of-Sale Employees, and/or Warehouse Workers can
access real-time information on their network via the access point while dealing
with patients, serving customers, and/or processing information.
d) Frequently Changing Environments
Setting up an access point, like the ALL-WAP02850N, to provide access to a
company network or its Internet connection is quick and easy which also makes
it ideal for establishing network access in temporary venues like exhibits, special
events, or show rooms.
e) Small Office and Home Office (SOHO) Networks
A wireless access point, like the ALL-WAP02850N, is ideal for SOHO users who

A
8
need a cost-effective way to expand their existing network to provide more
access for more devices, easy and quick installation of a small network.
f) Wireless Extensions to Existing Ethernet-based Networks
Wireless access points, like the ALL-WAP02850N, enable network administrators,
installers and end-users to extend the range and reach of an existing
Ethernet-based network.
g) Training/Educational Facilities
Training sites at corporations and universities deploy wireless access points to
provide connectivity their networks and the Internet connection for their
employees and students.

9
2Before you Begin
This section will guide you through the installation process. Placement of the
EnGenius ALL-WAP02850N is essential to maximize the access point’s performance.
Avoid placing the ALL-WAP02850N in an enclosed space such as a closet, cabinet, or
stairwell.
2.1 Considerations for Wireless Installation
Generally, the exact operating distance of a wireless device, like the ALL-WAP02850N,
cannot be pre-determined due to a number of unknown variables or obstacles in the
environment in which the device will be deployed. These could be the number,
thickness, and location of walls, ceilings, elevator shafts, stairwells, or other objects
that the device's wireless signals must pass through. Here are some key guidelines to
allow the ALL-WAP02850N to have optimal wireless range.
Keep the number of walls and/or ceilings between the ALL-WAP02850N and
other network devices to a minimum. Each wall and/or ceiling can reduce the
signal strength, resulting in lower signal strength.
Building materials make a difference. A solid metal door and/or aluminum studs
may have a significant negative effect on the signal strength of the
ALL-WAP02850N. Locate your wireless devices carefully so the signal can pass
through drywall and/or open doorways. Materials such as glass, steel, metal,
concrete, water (example: fish tanks), mirrors, file cabinets and/or brick can also
diminish wireless signal strength.
Interference from other electrical devices and/or appliances that generate RF
noise can also diminish the ALL-WAP02850N’s signal strength. The most
common types of devices are microwaves or cordless phones.

10
2.2 Computer Settings (in Windows XP/Windows 7)
In order to use the ALL-WAP02850N, you must first configure the TCP/IPv4
connection of your Windows OS computer system.
Click Start button and open Control Panel.
Windows XP Windows 7

A
11
In Windows XP, click Network Connections
In Windows 7, click View Network Status and Tasks in the Network and
Internet section, then select Change adapter settings
Right click on Local Area Connection and select
Properties
Select “Internet Protocol Version 4 (TCP/IPv4)” and then select Properties

A
12
Select Use the following IP address and enter
an IP address that is different from the
ALL-WAP02850N and subnet mask then click
OK.
2Note: Ensure that the IP address and subnet
mask are on the same subnet as the device.
3For example: ALL-WAP02850N IP address:
192.168.1.1
4PC IP address: 192.168.1.2 –192.168.1.255
5PC subnet mask: 255.255.255.0

13
2.3 Computer Settings in Apple Mac OS X
Go to System Preferences (can be opened in the Applications folder or
selecting it in the Apple Menu)
Select Network in the Internet & Network section
Highlight Ethernet
In Configure IPv4, select Manually
Enter an IP address that is different from the ALL-WAP02850N and subnet mask
then press OK
Note: Ensure that the IP address and subnet mask are on the same subnet as the
device.
For example: ALL-WAP02850N IP address: 192.168.1.1
PC IP address: 192.168.1.2 –192.168.1.255
PC subnet mask: 255.255.255.0
Click Apply when done.


14
2.4 Hardware Installation
1. Ensure that the computer in use has an available Ethernet (RJ-45) Port. For
more information, verify with your computer’s user manual.
2. Connect one end of the Category 5e Ethernet cable into the RJ-45 port of the
ALL-WAP02850N and the other end to the RJ-45 port of the computer. Ensure
that the cable is securely connected to both the ALL-WAP02850N and the
computer.
3. Connect the Power Adapter DC connector to the DC-IN port of the
ALL-WAP02850N and the Power Adapter to an available electrical outlet. Once
both connections are secure, verify the following:
a) Ensure that the POWER light is on (it will be orange).
b)Ensure that the 2.4GHz/z WLAN light is on (they will be blue).
c) Ensure that the LAN (Computer/ALL-WAP02850N Connection) light is on
(it will be blue).
d)Once all lights are on, proceed to set up the ALL-WAP02850N using the
computer.
This diagram depicts the hardware configuration.
Front Panel
LED Lights
LED lights for Power, Gigabit Ethernet port, WLAN 2.4G
Rear Panel
Power
DC IN for Power.
Gigabit Ethernet Port
Gigabit Ethernet port for RJ-45 cable.
Reset Button
One click for reset the device. Press over 30 seconds for reset to
factory default.

15
3Configuring Your ALL-WAP02850N
This section will show you how to configure the device using the web-based
configuration interface.
3.1 Default Settings
Please use your Ethernet port or wireless network adapter to connect the
ALL-WAP02850N.
Default Settings
IP Address
192.168.1.1
Username / Password
admin / admin
Operation Mode
AP / AP

16
3.2 Web Configuration
Open a web browser (Internet Explorer/Firefox/Safari) and enter the IP Address
http://192.168.1.1
Note: If you have changed the default LAN IP Address of the Access Point, ensure you enter the correct
IP Address.
The default username and password are admin. Once you have entered the
correct username and password, click the Login button to open the web-base
configuration page.
If successful, you will be logging in and see the ALL-WAP02850N User Menu.

A
17

ALL-WAP02850N User’s Manual
18
4Building a Wireless Network
The ALL-WAP02850N has the ability to operate in various modes. This chapter
describes the operating modes of the ALL-WAP02850N.
4.1 Access Point Mode
In Access Point Mode, ALL-WAP02850N behaves likes a central connection for
stations or clients that support IEEE 802.11a/b/g/n networks. The stations and clients
must be configured to use the same SSID (Service Set Identifier) and security
password to associate with the ALL-WAP02850N. The ALL-WAP02850N supports up
to eight SSIDs at the same time for secure access.

ALL-WAP02850N User’s Manual
19
4.2 Client Bridge Mode
In Client Bridge Mode, the ALL-WAP02850N essentially acts as a wireless adapter that
connects to an access point to allow a system wireless access to the network. This
mode requires you to connect the Ethernet port on your PC to the ALL-WAP02850N
LAN port.
If you use the client bridge operating mode, use the ALL-WAP02850N Site Survey
feature to scan for Access Points within range. When you find an Access Point,
configure the ALL-WAP02850N to use the same SSID and Security Password as the
Access Point to associate with it.