Alpha WSERD50 User manual

WSER MOTOR GUIDE pD50 1
ALPHA SUPPORT PHONE [phone]
DC12 V0
Power
1
1
15-20
1. CALTECHNI SPECIFICATIONS
Power: Lithium battery DC12V
Received frequency: 433.92MHz
Protection Class: IP44
Way A
2. WIRE CONNECTION
3. CODE LEARNING Note: After code learning, you can use the to control the motor to run up, down and stop.remote
Power on, the motor
will vibrate.
Note: a) Way A is only for the tubular motor which didn't learn any ’s code.remote
b) If the motor has already learned ’s code, Way A is invalid for this motor, but you can cut the electricity and then power on theremote
motor three times continuously, and make sure the motor vibrate each time, then Way A is valid for this motor.
Power on learning
Channel Switch
Button
UP
STOP
DOWN
LIGHT
battery wand
capacity
battery discharging battery
charging
charging voltage
solar panel
Press ’s UP and DOWNremote
buttons simultaneously.
Press ’s STOP buttonremote
once, the motor will vibrate.
1
Way B
Press the UP and DOWN
buttons of Aremote
simultaneously.
Press the STOP button of
A eight times, theremote
motor will vibrate.
Press the UP and DOWN
buttons of B simultaneously.remote
Press the STOP button of Bremote
once, the motor will vibrate again.
Now B can control the motor as well.remote
AABB
11
11
Note: A has learned motor's code, and B is a new one.Remote remote
1
8
11
Code learning is successful,
you can control the motor by
the .remote
Way C
Press motor head's button for 1s
till the motor vibrates.
You can control the motor
by the .remote
Press ’s UP buttonremote
once, the motor vibrates once.
Press ’s UP and DOWNremote
buttons simultaneously.
Press ’s STOPremote
button six times.
6
1
1
All the that have alreadyremote
learned the motor's code won't
control the motor any more.
Note: All the will not control this motor, unless you cut off the power and do code learning again.remotes
Way A
4. CODE DELETING
Press ’s UP and DOWNremote
buttons simultaneously.
Press ’s STOP buttonremote
once, the motor will vibrate.
1
11
Code: Rolling code
One motor can be controlled by 15 units of at mostremotes

WSER MOTOR GUIDE pD50 2
ALPHA SUPPORT PHONE [phone]
5. DIRECTION CHANGE
Press remote’s DOWN button
once, the motor vibrates once.
Press remote’s UP and DOWN
buttons simultaneously.
Press remote’s STOP
button six times.
The motor's running
direction is changed.
Note: The motor's running direction will not be changed if the two wires are exchanged.
6
1
1
1
Press remote’s UP button once,
the motor vibrates once.
Press 's UP and DOWNremote
buttons simultaneously.
Press remote’s STOP
button seven times.
7
1
1
This remote you are operating now
won't control the motor any more.
Way B
Way A
Press remote’s UP and DOWN
buttons simultaneously.
Press remote’s STOP
button twice.
Press remote’s UP button once,
the motor vibrates once.
The up limit is set, the motor will stop
running when it reaches to the UP limit
8. UP LIMIT SETTING
Press remote’s UP and DOWN
buttons simultaneously.
Press remote’s STOP
button once.
Press remote’s UP button once,
the motor vibrates once.
The motor will run step by step.
6. SET STEP BY STEP FUNCTION
1
121
1
111
1
Way B
Press motor head's button for 5s
till the motor vibrates.
The motor's running direction
is changed.
Press remote’s UP and DOWN
buttons simultaneously.
Press remote’s STOP
button once.
Press remote’s DOWN button
once, the motor vibrates once.
The motor will run
continuously.
7. DELETE STEP BY STEP FUNCTION
111
1
Note: If the motor runs step by step, long press ’s UP or DOWN button, the motor will run continuously.remote

WSER MOTOR GUIDE p3D50
ALPHA SUPPORT PHONE [phone]
Press remote’s UP and DOWN
buttons simultaneously.
Press remote’s STOP
button twice.
Press remote’s DOWN button
once, the motor vibrates.
The down limit is set, the motor
will stop running when it reaches
to the down limit.
9. DOWN LIMIT SETTING
Press remote’s UP and DOWN
buttons simultaneously.
Press remote’s STOP
button four times.
Press remote’s UP button once,
the motor vibrates once.
10. UP LIMIT DELETING
Press ’s UP and DOWNremote
buttons simultaneously.
Press ’s STOPremote
button four times.
Press ’s DOWN buttonremote
once, the motor vibrates once.
The down limit is deleted.
11. DOWN LIMIT DELETING
The up limit is deleted.
121
141
1
11
1
4
Press ’s STOP button fourremote
times when the motor stops running.
12. THE THIRD LIMIT
The motor will vibrate once, it means
this position is set as the third limit.
Long press ’s STOP button for 2 ,remote s
the motor will run to the third limit and stop.
A. The Third Limit Setting
B. The Third Limit Setting
Make the motor stop at ideal position,
press ’s STOP button four times.remote
The motor will vibrate once, the original
third limit will be deleted, and this position
is set as new third limit.
Long press ’s STOP button,remote
the motor will run to the new third
limit and stop.
Note: 1) The third limit is also named as intermediate limit, it can be set at any position between up limit and down limit.
2) If the up limit or down limit is deleted, the third limit will be deleted automatically.
1
1
The setting may fail due to other signal interference. In this case, please reset.
The RE101 is taken as an example in this instruction. The receiver is compatible with several other rolling code s.remote remote
If ’s battery is in low power, please replace it.remote
The receiver is of high voltage, please do not place it in humid atmosphere.
Children should be supervised to ensure that they do not play with the appliance.
Working temperature: 10°C +55 °C-
All products are as per real subjects. There will be no prior notification if any change in appearance, color, functions etc.
-
Announcement
4
4
1
1