Alpha WSME User manual

WSME MOTOR INSTRUCTIONS p1
ALPHA SUPPORT PHONE [phone]
AC Power
Power: AC 120V/60Hz
Protection Index: I 44P
The motor can be compatible with 15 at mostremotes .
1. CALTECHNI SPECIFICATIONS
2. WIRE CONNECTION
3. CODE LEARNING
4. COPY
5. CODE DELETING
Note: After code learning, you can use the to control the motor to run up, down and stop.remote
Power on, the motor will vibrate. You can control the motor
by the remote.
Press 's STOP button onceremote
within 10 , the motor will vibrate.s
Press UP and DOWN
buttons simultaneously.
A. Delete the you are operatingremote
B. Delete all the remotes
antenna
live wire (black)
ground wire ( )green
neutral wire (white)
AC Power
120V
Press A remote
UP and DOWN
buttons simultaneously.
Press UP and DOWN
buttons simultaneously.
Press UP and DOWN
buttons simultaneously
Press A STOPremote
button 8 times within 10s,
the motor will vibrate.
Press A STOPremote
button 7 times within 10s.
Press STOP buttonremote
6 times within 10s.
Press B UPremote
and DOWN buttons
simultaneously.
Press UP button once withinremote
10s, the motor will vibrate.
Press UP button once withinremote
10s, the motor will vibrate.
Press B STOP buttonremote
once within 10s, the motor
will vibrate.
You can control the motor
by B .remote
The you are operating nowremote
won’t control the motor again.
All the that have alreadyremote
learned the motor’s code won’t
control the motor anymore.

WSME MOTOR INSTRUCTIONS p2
Alpha Tubular Motors LLC
1840 S Commercenter Circle
San Bernardino CA 92408
[e-mail]
alphamotors.uswww.
[phone]T
ALPHA SUPPORT PHONE [phone]
6. DIRECTION CHANGE
If the motor is in vibration state, long press emitter's UP or DOWN button for 3 seconds, the motor will run continously.
Setting may fail due to the interference of signal. If in this case, please reset.
The RE101 is taken as an example in this instruction. The receiver is compatible with several other rolling code .remote remotes
Please do not press buttons for too long in case life span of battery declines. Pressing time should be at 0.5 , interval time should be 1 second.s
If the battery is in low power, please replace battery.
The control unit is of high voltage. Please do not place it in humid atmosphere.
Children should be supervised to ensure that they do not play with the appliance.
Ambient temperature:
,All products are as per material subjects if there is change in appearance, color function etc.
The information is subject to changes without prior notice.
7. SET STEP BY STEP FUNCTION
8. DELETE STEP BY STEP FUNCTION
Announcement
-10 C to +55 C
oo
Press UP and DOWN
buttons simultaneously.
Press UP and DOWN
buttons simultaneously.
Press UP and DOWN
buttons simultaneously.
Press ’s STOP buttonremote
6 times within 10s.
Press ’s STOP buttonremote
once within 10s.
Press ’s STOP buttonremote
once within 10s.
Press DOWN button onceremote
within 10s, the motor will vibrate.
Press UP button onceremote
within 10s, the motor will vibrate.
Press DOWN button onceremote
within 10s, the motor will vibrate.
The motor’s running direction
is changed.
The motor will run
step by step.
The motor will run
continuously.